Date: Fri, 30 Jun 2006 10:21:34 +0930 From: "Daniel O'Connor" <doconnor@gsoft.com.au> To: freebsd-stable@freebsd.org Subject: 6.1-STABLE panic Message-ID: <200606301021.35529.doconnor@gsoft.com.au>
next in thread | raw e-mail | index | archive | help
--nextPart1361076.boCKVDLuKA
Content-Type: multipart/mixed;
boundary="Boundary-01=_XWHpE0xhoVY+i+F"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
--Boundary-01=_XWHpE0xhoVY+i+F
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline
I have an odd problem with 6.1 where it panics, and then when it reboots the
system hangs solid just after printing how much memory is in the system, the
only way out is the reset switch.
[GDB will not be able to debug user-mode threads: /usr/lib/libthread_db.so:=
=20
Undefined symbol "ps_pglobal_lookup"]
GNU gdb 6.1.1 [FreeBSD]
Copyright 2004 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain condition=
s.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "i386-marcel-freebsd".
Unread portion of the kernel message buffer:
=46atal trap 12: page fault while in kernel mode
fault virtual address =3D 0xb6
fault code =3D supervisor read, page not present
instruction pointer =3D 0x20:0xc0512564
stack pointer =3D 0x28:0xdea06b1c
frame pointer =3D 0x28:0xdea06b4c
code segment =3D base 0x0, limit 0xfffff, type 0x1b
=3D DPL 0, pres 1, def32 1, gran 1
processor eflags =3D interrupt enabled, resume, IOPL =3D 3
current process =3D 1114 (Xorg)
trap number =3D 12
panic: page fault
Uptime: 1d16h47m39s
Dumping 511 MB (2 chunks)
chunk 0: 1MB (159 pages) ... ok
chunk 1: 511MB (130800 pages) 495 479 463 447 431 415 399 383 367 351 335=
=20
319 303 28
7 271 255 239 223 207 191 175 159 143 127 111 95 79 63 47 31 15
(kgdb) bt
#0 doadump () at pcpu.h:165
#1 0xc04eaf44 in boot (howto=3D260) at /data/src/sys/kern/kern_shutdown.c:=
409
#2 0xc04eb1dc in panic (fmt=3D0xc06462f7 "%s")
at /data/src/sys/kern/kern_shutdown.c:565
#3 0xc06262dc in trap_fatal (frame=3D0xdea06adc, eva=3D182)
at /data/src/sys/i386/i386/trap.c:836
#4 0xc0626043 in trap_pfault (frame=3D0xdea06adc, usermode=3D0, eva=3D182)
at /data/src/sys/i386/i386/trap.c:744
#5 0xc0625ca1 in trap (frame=3D
{tf_fs =3D 8, tf_es =3D 40, tf_ds =3D 40, tf_edi =3D 8191, tf_esi =3D=
14, tf_ebp=20
=3D -559912116, tf_isp =3D -559912184, tf_ebx =3D -1010665600, tf_edx=20
=3D -1007513240, tf_ecx =3D 0, tf_eax =3D -1066928096, tf_trapno =3D 12, tf=
_err =3D 0,=20
tf_eip =3D -1068423836, tf_cs =3D 32, tf_eflags =3D 2175622, tf_esp =3D -10=
68444423,=20
tf_ss =3D -1007513240})
at /data/src/sys/i386/i386/trap.c:434
#6 0xc0615b3a in calltrap () at /data/src/sys/i386/i386/exception.s:139
#7 0xc0512564 in soo_poll (fp=3D0xe, events=3D-559912044, active_cred=3D0x=
dea06b84,
td=3D0x40) at /data/src/sys/kern/sys_socket.c:232
#8 0xc050cff1 in kern_select (td=3D0xc3c27780, nd=3D64, fd_in=3D0x81bf7c0,=
=20
fd_ou=3D0x0,
fd_ex=3D0x0, tvp=3D0xdea06cd0) at /data/src/sys/kern/sys_generic.c:763
#9 0xc050cc40 in select (td=3D0xc3c27780, uap=3D0xdea06d04)
=2D--Type <return> to continue, or q <return> to quit---
at /data/src/sys/kern/sys_generic.c:667
#10 0xc06265f3 in syscall (frame=3D
{tf_fs =3D 59, tf_es =3D 59, tf_ds =3D 59, tf_edi =3D 0, tf_esi =3D -=
1, tf_ebp=20
=3D -1077941800, tf_isp =3D -559911580, tf_ebx =3D -1, tf_edx =3D 0, tf_ecx=
=3D 0,=20
tf_eax =3D 93, tf_trapno =3D 22, tf_err =3D 2, tf_eip =3D 673900391, tf_cs =
=3D 51,=20
tf_eflags =3D 2110098, tf_esp =3D -1077942388, tf_ss =3D 59})=20
at /data/src/sys/i386/i386/trap.c:981
#11 0xc0615b8f in Xint0x80_syscall ()=20
at /data/src/sys/i386/i386/exception.s:200
#12 0x00000033 in ?? ()
I am using the 'nv' driver - normally I use the nvidia one but I was trying
to reduce the number of variables.
I have run memtest86 for a while as well and cpuburn with no adverse result=
s.
The system seems to crash every few days although this is the first one I h=
ad
since installing a debug kernel so maybe they are different, however the=20
non-debug ones looked the same as each other.
This system was originally a Duron 800 and I was having stability issues so
I updated it to a Sempron 3300+ (still i386), there is no one piece of=20
original
hardware in the system (there was a TV tuner card but I removed that for
test purposes).
The verbose dmesg was shortened so I don't have a full copy, I have attached
the partial verbose dmesg and the full normal dmesg.
=2D-=20
Daniel O'Connor software and network engineer
for Genesis Software - http://www.gsoft.com.au
"The nice thing about standards is that there
are so many of them to choose from."
-- Andrew Tanenbaum
GPG Fingerprint - 5596 B766 97C0 0E94 4347 295E E593 DC20 7B3F CE8C
--Boundary-01=_XWHpE0xhoVY+i+F
Content-Type: text/plain; charset="us-ascii"; name="dmesg-verbose-trunc.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="dmesg-verbose-trunc.txt"
pcib0: matched entry for 0.10.INTA
pcib0: slot 10 INTA hardwired to IRQ 18
found-> vendor=3D0x1106, dev=3D0x3149, revid=3D0x80
bus=3D0, slot=3D15, func=3D0
class=3D01-04-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Db, irq=3D11
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000e000, size 3, enabled
map[14]: type 4, range 32, base 0000e100, size 2, enabled
map[18]: type 4, range 32, base 0000e200, size 3, enabled
map[1c]: type 4, range 32, base 0000e300, size 2, enabled
map[20]: type 4, range 32, base 0000e400, size 4, enabled
map[24]: type 4, range 32, base 0000e500, size 8, enabled
pcib0: matched entry for 0.15.INTB (src \\_SB_.PCI0.ALKA:0)
pcib0: slot 15 INTB routed to irq 20 via \\_SB_.PCI0.ALKA
found-> vendor=3D0x1106, dev=3D0x0571, revid=3D0x06
bus=3D0, slot=3D15, func=3D1
class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Da, irq=3D255
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000e600, size 4, enabled
found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0x81
bus=3D0, slot=3D16, func=3D0
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords)
lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Da, irq=3D10
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000e700, size 5, enabled
pcib0: matched entry for 0.16.INTA (src \\_SB_.PCI0.ALKB:0)
pcib0: slot 16 INTA routed to irq 21 via \\_SB_.PCI0.ALKB
found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0x81
bus=3D0, slot=3D16, func=3D1
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords)
lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Da, irq=3D10
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000e800, size 5, enabled
pcib0: matched entry for 0.16.INTA (src \\_SB_.PCI0.ALKB:0)
pcib0: slot 16 INTA routed to irq 21 via \\_SB_.PCI0.ALKB
found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0x81
bus=3D0, slot=3D16, func=3D2
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords)
lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Db, irq=3D11
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000e900, size 5, enabled
pcib0: matched entry for 0.16.INTB (src \\_SB_.PCI0.ALKB:0)
pcib0: slot 16 INTB routed to irq 21 via \\_SB_.PCI0.ALKB
found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0x81
bus=3D0, slot=3D16, func=3D3
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords)
lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Db, irq=3D11
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000ea00, size 5, enabled
pcib0: matched entry for 0.16.INTB (src \\_SB_.PCI0.ALKB:0)
pcib0: slot 16 INTB routed to irq 21 via \\_SB_.PCI0.ALKB
found-> vendor=3D0x1106, dev=3D0x3104, revid=3D0x86
bus=3D0, slot=3D16, func=3D4
class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords)
lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Dc, irq=3D12
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fa001000, size 8, enabled
pcib0: matched entry for 0.16.INTC (src \\_SB_.PCI0.ALKB:0)
pcib0: slot 16 INTC routed to irq 21 via \\_SB_.PCI0.ALKB
found-> vendor=3D0x1106, dev=3D0x3227, revid=3D0x00
bus=3D0, slot=3D17, func=3D0
class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0087, statreg=3D0x0210, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=3D0x1106, dev=3D0x3059, revid=3D0x60
bus=3D0, slot=3D17, func=3D5
class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0001, statreg=3D0x0210, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Dc, irq=3D12
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000eb00, size 8, enabled
pcib0: matched entry for 0.17.INTC (src \\_SB_.PCI0.ALKC:0)
pcib0: slot 17 INTC routed to irq 22 via \\_SB_.PCI0.ALKC
found-> vendor=3D0x1106, dev=3D0x3065, revid=3D0x78
bus=3D0, slot=3D18, func=3D0
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords)
lattimer=3D0x20 (960 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x08 (2000 ns)
intpin=3Da, irq=3D10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000ec00, size 8, enabled
map[14]: type 1, range 32, base fa002000, size 8, enabled
pcib0: matched entry for 0.18.INTA (src \\_SB_.PCI0.ALKD:0)
pcib0: slot 18 INTA routed to irq 23 via \\_SB_.PCI0.ALKD
found-> vendor=3D0x1022, dev=3D0x1100, revid=3D0x00
bus=3D0, slot=3D24, func=3D0
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x1022, dev=3D0x1101, revid=3D0x00
bus=3D0, slot=3D24, func=3D1
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x1022, dev=3D0x1102, revid=3D0x00
bus=3D0, slot=3D24, func=3D2
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x1022, dev=3D0x1103, revid=3D0x00
bus=3D0, slot=3D24, func=3D3
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
agp0: <VIA 8380 host to PCI bridge> mem 0xe8000000-0xefffffff at device 0.0=
on pci0
agp0: 1 Miscellaneous Control unit(s) found.
agp0: Aperture Base[0]: 0x00000074
agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xe8000000
agp0: allocating GATT for aperture of size 128M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xf8000000-0xf9ffffff
pcib1: prefetched decode 0xf0000000-0xf7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=3D1
found-> vendor=3D0x10de, dev=3D0x0181, revid=3D0xa2
bus=3D1, slot=3D0, func=3D0
class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x02b0, cachelnsz=3D0 (dwords)
lattimer=3D0x20 (960 ns), mingnt=3D0x05 (1250 ns), maxlat=3D0x01 (250 ns)
intpin=3Da, irq=3D10
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base f8000000, size 24, enabled
pcib1: (null) requested memory range 0xf8000000-0xf8ffffff: good
map[14]: type 3, range 32, base f0000000, size 27, enabled
pcib1: (null) requested memory range 0xf0000000-0xf7ffffff: good
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
pcib1: slot 0 INTA is routed to irq 16
pci1: <display, VGA> at device 0.0 (no driver attached)
fwohci0: <Lucent FW322/323> mem 0xfa000000-0xfa000fff irq 18 at device 10.0=
on pci0
fwohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfa000000
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 49
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.0 (ROM=3D1)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:01:99:00:00:03:7c:7b
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me)
firewire0: bus manager 0 (me)
atapci0: <VIA 6420 SATA150 controller> port 0xe000-0xe007,0xe100-0xe103,0xe=
200-0xe207,0xe300-0xe303,0xe400-0xe40f,0xe500-0xe5ff irq 20 at device 15.0 =
on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe400
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 50
atapci0: [MPSAFE]
atapci0: Reserved 0x100 bytes for rid 0x24 type 4 at 0xe500
ata2: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xe000
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xe100
ata2: SATA connect ready time=3D0ms
ata2: sata_connect devices=3D0x1<ATA_MASTER>
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xe200
atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xe300
ata3: SATA connect ready time=3D0ms
ata3: sata_connect devices=3D0x1<ATA_MASTER>
ata3: [MPSAFE]
atapci1: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0=
x376,0xe600-0xe60f at device 15.1 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe600
ata0: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00
ata0: stat0=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb
ata0: stat1=3D0x00 err=3D0x00 lsb=3D0x00 msb=3D0x00
ata0: reset tp2 stat0=3D00 stat1=3D00 devices=3D0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 51
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=3D03 ostat0=3D60 ostat1=3D70
ata1: stat0=3D0x20 err=3D0x20 lsb=3D0x20 msb=3D0x20
ata1: stat1=3D0x30 err=3D0x30 lsb=3D0x30 msb=3D0x30
ata1: reset tp2 stat0=3D20 stat1=3D30 devices=3D0x0
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 52
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xe700-0xe71f irq 21 at device 16.0=
on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe700
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 53
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xe800-0xe81f irq 21 at device 16.1=
on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe800
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xe900-0xe91f irq 21 at device 16.2=
on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe900
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xea00-0xea1f irq 21 at device 16.3=
on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xea00
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfa001000-0xfa0010ff irq 21 at =
device 16.4 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfa001000
ehci0: [GIANT-LOCKED]
ehci0: Dropped interrupts workaround enabled
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
umass0: Generic USB 2.0 Card Chip, rev 2.00/1.20, addr 2
umass0:1:0:-1: Attached to scbus1
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pcm0: <VIA VT8237> port 0xeb00-0xebff irq 22 at device 17.5 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xeb00
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 54
pcm0: [MPSAFE]
pcm0: <VIA Technologies VIA1617A AC97 Codec (id =3D 0x56494170)>
pcm0: Codec features headphone, 18 bit DAC, 18 bit ADC, 5 bit master volume=
, Reserved 27
pcm0: Primary codec extended features variable rate PCM, double rate PCM, r=
eserved 1, center DAC, surround DAC, LFE DAC, reserved 5
pcm0: ac97 codec dac ready count: 0
pcm0: sndbuf_setmap 1f3f6000, 2000; 0xdd73c000 -> 1f3f6000
pcm0: sndbuf_setmap 1f3f4000, 2000; 0xdd73e000 -> 1f3f4000
pcm0: sndbuf_setmap 1f3f2000, 2000; 0xdd740000 -> 1f3f2000
pcm0: sndbuf_setmap 1f3f0000, 2000; 0xdd742000 -> 1f3f0000
pcm0: sndbuf_setmap 1f3e1000, 2000; 0xdd744000 -> 1f3e1000
pcm0: sndbuf_setmap 1f3de000, 2000; 0xdd746000 -> 1f3de000
pcm0: <VIA DXS Enabled: DXS 4 / SGD 1 / REC 1>
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xec00-0xecff mem 0xfa002000-0=
xfa0020ff irq 23 at device 18.0 on pci0
vr0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xec00
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x004063, model 0x0032, rev. 10
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: bpf attached
vr0: Ethernet address: 00:16:17:12:4f:49
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 55
vr0: [MPSAFE]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 56
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x4061 0x4061 0x4061 0x4061
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acp=
i0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57
sio1: irq maps: 0x4061 0x4069 0x4061 0x4061
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ioapic0: routing intpin 3 (ISA IRQ 3) to vector 58
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <Standard parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 o=
n acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ioapic0: routing intpin 7 (ISA IRQ 7) to vector 59
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 60
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
npx0: INT 16 interface
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sc: sc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
vga: vga0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
ums0: Logitech USB Receiver, rev 1.10/9.10, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
ucom0: vendor 0x067b product 0x2303, rev 1.10/2.02, addr 2
ucom1: Sirius Technologies Roadster II 56 USB, rev 1.00/1.00, addr 2, iclas=
s 2/2
ucom1: data interface 1, has CM over data, has break
ucom1: status change notification available
Device configuration finished.
lapic: Divisor 2, Frequency 99989117 hz
Timecounter "TSC" frequency 1999795753 Hz quality 800
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled,=
default to accept, logging disabled
DUMMYNET with IPv6 initialized (040826)
pflog0: bpf attached
lo0: bpf attached
pfsync0: bpf attached
ata0-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA33 cable=3D40 wire
acd0: setting PIO4 on 8237 chip
acd0: setting UDMA33 on 8237 chip
acd0: <SONY CD-RW CRX300E/KYS2> CDRW drive at ata0 as master
acd0: read 5410KB/s (10820KB/s) write 172KB/s (8268KB/s), 2048KB buffer, UD=
MA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM 120mm data disc
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
ata2-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA100 cable=3D40 wire
ad0: 305245MB <WDC WD3200SD-01KNB0 08.05J08> at ata2-master SATA150
ad0: 625142448 sectors [620181C/16H/63S] 16 sectors/interrupt 1 depth queue
*************** ATA VIA Metadata ****************
magic 0xaa55
dummy_0 0x01
type RAID1
bootable 1
unknown 0
disk_index 0x00
stripe_layout 0x00
stripe_disks 0
stripe_sectors 8
disk_sectors 625142447
disk_id 0x38097d71
DISK# disk_id
0 0x38097d71
1 0x3f12836b
2 0xbebbf631
3 0x3804b107
4 0x7f08742f
5 0x75f68575
6 0x80de8971
7 0xefe210c3
checksum 0xc9
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
ata3-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA100 cable=3D40 wire
ad1: 305245MB <WDC WD3200SD-01KNB0 08.05J08> at ata3-master SATA150
ad1: 625142448 sectors [620181C/16H/63S] 16 sectors/interrupt 1 depth queue
*************** ATA VIA Metadata ****************
magic 0xaa55
dummy_0 0x01
type RAID1
bootable 1
unknown 0
disk_index 0x04
stripe_layout 0x00
stripe_disks 0
stripe_sectors 8
disk_sectors 625142447
disk_id 0x3f12836b
DISK# disk_id
0 0x38097d71
1 0x3f12836b
2 0xbebbf631
3 0x3804b107
4 0x7f08742f
5 0x75f68575
6 0x80de8971
7 0xefe210c3
checksum 0xdd
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
(probe8:ata0:0:0:0): error 22
(probe8:ata0:0:0:0): Unretryable Error
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
pass0 at umass-sim0 bus 0 target 0 lun 0
pass0: <Generic 2.0 Reader-CF 1.00> Removable Direct Access SCSI-0 device=20
pass0: Serial Number \^_
pass0: 40.000MB/s transfers
pass1 at umass-sim0 bus 0 target 0 lun 1
pass1: <Generic 2.0 Reader-SM/xD 1.00> Removable Direct Access SCSI-0 devic=
e=20
pass1: Serial Number \^_
pass1: 40.000MB/s transfers
pass2 at umass-sim0 bus 0 target 0 lun 2
pass2: <Generic 2.0 Reader-SD 1.00> Removable Direct Access SCSI-0 device=20
pass2: Serial Number \^_
pass2: 40.000MB/s transfers
pass3 at umass-sim0 bus 0 target 0 lun 3
pass3: <Generic 2.0 Reader-MS 1.00> Removable Direct Access SCSI-0 device=20
pass3: Serial Number \^_
pass3: 40.000MB/s transfers
pass4 at ata0 bus 0 target 0 lun 0
pass4: <SONY CD-RW CRX300E KYS2> Removable CD-ROM SCSI-0 device=20
pass4: 33.000MB/s transfers
cd0 at ata0 bus 0 target 0 lun 0
cd0: <SONY CD-RW CRX300E KYS2> Removable CD-ROM SCSI-0 device=20
cd0: 33.000MB/s transfers
cd0: cd present [2285888 x 2048 byte records]
ATA PseudoRAID loaded
********** ATA PseudoRAID ar0 Metadata **********
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
format VIA Tech V-RAID
type RAID1
flags 0x00 0
magic_0 0x0000000038097d71
magic_1 0x0000000000000000
generation 0
total_sectors 625142447
offset_sectors 0
heads 255
sectors 63
cylinders 38913
width 1
interleave 8
total_disks 8
disk 0: flags =3D 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad0: sectors 625142447
disk 1: flags =3D 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad1: sectors 625142447
disk 2: flags =3D 0x00 0
disk 3: flags =3D 0x00 0
disk 4: flags =3D 0x00 0
disk 5: flags =3D 0x00 0
disk 6: flags =3D 0x00 0
disk 7: flags =3D 0x00 0
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
ar0: 305245MB <VIA Tech V-RAID RAID1> status: READY
ar0: 625142447 sectors [38913C/255H/63S] <> subdisks defined as:
ar0: disk0 READY (master) using ad0 at ata2-master
ar0: disk1 READY (mirror) using ad1 at ata3-master
ar0: disk2 DOWN no device found for this subdisk
ar0: disk3 DOWN no device found for this subdisk
ar0: disk4 DOWN no device found for this subdisk
ar0: disk5 DOWN no device found for this subdisk
ar0: disk6 DOWN no device found for this subdisk
ar0: disk7 DOWN no device found for this subdisk
(da0:umass-sim0:0:0:0): error 6
(da0:umass-sim0:0:0:0): Unretryable Error
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic 2.0 Reader-CF 1.00> Removable Direct Access SCSI-0 device=20
da0: Serial Number \^_
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
(da1:umass-sim0:0:0:1): error 6
(da1:umass-sim0:0:0:1): Unretryable Error
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <Generic 2.0 Reader-SM/xD 1.00> Removable Direct Access SCSI-0 device=
=20
da1: Serial Number \^_
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
(da2:umass-sim0:0:0:2): error 6
(da2:umass-sim0:0:0:2): Unretryable Error
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <Generic 2.0 Reader-SD 1.00> Removable Direct Access SCSI-0 device=20
da2: Serial Number \^_
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
(da3:umass-sim0:0:0:3): error 6
(da3:umass-sim0:0:0:3): Unretryable Error
da3 at umass-sim0 bus 0 target 0 lun 3
da3: <Generic 2.0 Reader-MS 1.00> Removable Direct Access SCSI-0 device=20
da3: Serial Number \^_
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
GEOM: new disk ad0
GEOM: new disk ad1
GEOM: new disk cd0
GEOM: new disk da0
GEOM: new disk da1
GEOM: new disk da2
GEOM: new disk da3
GEOM: new disk ar0
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 =
0 0 0 0 0 0 0=20
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
Unretryable error
(da0:umass-sim0:0:0:0): error 6
(da0:umass-sim0:0:0:0): Unretryable Error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 =
0 0 0 0 0 0 0=20
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
Unretryable error
(da0:umass-sim0:0:0:0): error 6
(da0:umass-sim0:0:0:0): Unretryable Error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 =
0 0 0 0 0 0 0=20
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
Unretryable error
(da0:umass-sim0:0:0:0): error 6
(da0:umass-sim0:0:0:0): Unretryable Error
Opened disk da0 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0=20
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0=
0 0 0 0 0 0 0=20
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
Unretryable error
(da1:umass-sim0:0:0:1): error 6
(da1:umass-sim0:0:0:1): Unretryable Error
Opened disk da1 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0=20
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0=
0 0 0 0 0 0 0=20
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
Unretryable error
(da1:umass-sim0:0:0:1): error 6
(da1:umass-sim0:0:0:1): Unretryable Error
Opened disk da1 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0=20
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0=
0 0 0 0 0 0 0=20
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
Unretryable error
(da1:umass-sim0:0:0:1): error 6
(da1:umass-sim0:0:0:1): Unretryable Error
Opened disk da1 -> 6
(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0=20
(da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:2): SCSI Status: Check Condition
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
(da2:umass-sim0:0:0:2): (da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0=
0 0 0 0 0 0 0=20
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
Unretryable error
(da2:umass-sim0:0:0:2): error 6
(da2:umass-sim0:0:0:2): Unretryable Error
Opened disk da2 -> 6
(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0=20
(da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:2): SCSI Status: Check Condition
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
(da2:umass-sim0:0:0:2): (da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0=
0 0 0 0 0 0 0=20
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
Unretryable error
(da2:umass-sim0:0:0:2): error 6
(da2:umass-sim0:0:0:2): Unretryable Error
Opened disk da2 -> 6
(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0=20
(da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:2): SCSI Status: Check Condition
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
(da2:umass-sim0:0:0:2): (da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0=
0 0 0 0 0 0 0=20
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
Unretryable error
(da2:umass-sim0:0:0:2): error 6
(da2:umass-sim0:0:0:2): Unretryable Error
Opened disk da2 -> 6
(da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0=20
(da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(da3:umass-sim0:0:0:3): SCSI Status: Check Condition
(da3:umass-sim0:0:0:3): NOT READY asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
(da3:umass-sim0:0:0:3): (da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0=
0 0 0 0 0 0 0=20
(da3:umass-sim0:0:0:3): NOT READY asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
Unretryable error
(da3:umass-sim0:0:0:3): error 6
(da3:umass-sim0:0:0:3): Unretryable Error
Opened disk da3 -> 6
(da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0=20
(da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(da3:umass-sim0:0:0:3): SCSI Status: Check Condition
(da3:umass-sim0:0:0:3): NOT READY asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
(da3:umass-sim0:0:0:3): (da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0=
0 0 0 0 0 0 0=20
(da3:umass-sim0:0:0:3): NOT READY asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
Unretryable error
(da3:umass-sim0:0:0:3): error 6
(da3:umass-sim0:0:0:3): Unretryable Error
Opened disk da3 -> 6
(da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0=20
(da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(da3:umass-sim0:0:0:3): SCSI Status: Check Condition
(da3:umass-sim0:0:0:3): NOT READY asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
(da3:umass-sim0:0:0:3): (da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0=
0 0 0 0 0 0 0=20
(da3:umass-sim0:0:0:3): NOT READY asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
Unretryable error
(da3:umass-sim0:0:0:3): error 6
(da3:umass-sim0:0:0:3): Unretryable Error
Opened disk da3 -> 6
Trying to mount root from ufs:/dev/ar0s1a
WARNING: / was not properly dismounted
start_init: trying /sbin/init
WARNING: /var was not properly dismounted
/var: mount pending error: blocks 12 files 2
WARNING: /usr was not properly dismounted
WARNING: /data was not properly dismounted
/data: mount pending error: blocks 6644 files 50
procfs registered
linprocfs registered
nfslock: pseudo-device
--Boundary-01=_XWHpE0xhoVY+i+F
Content-Type: text/plain;
charset="us-ascii";
name="dmesg.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="dmesg.txt"
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
=46reeBSD 6.1-STABLE #1: Sun Jun 11 08:43:05 CST 2006
darius@midget.dons.net.au:/usr/obj/usr/src/sys/MIDGET
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
=46reeBSD 6.1-STABLE #1: Sun Jun 11 08:43:05 CST 2006
darius@midget.dons.net.au:/usr/obj/usr/src/sys/MIDGET
ACPI APIC Table: <VIAK8M AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Sempron(tm) Processor 3300+ (1999.78-MHz 686-class CPU)
Origin =3D "AuthenticAMD" Id =3D 0x20fc2 Stepping =3D 2
Features=3D0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=3D0x1<SSE3>
AMD Features=3D0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow>
AMD Features2=3D0x1<LAHF>
real memory =3D 536805376 (511 MB)
avail memory =3D 515936256 (492 MB)
ioapic0 <Version 0.3> irqs 0-23 on motherboard
bktr_mem: memory holder loaded
acpi0: <VIAK8M AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
powernow0: <Cool`n'Quiet K8> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 8380 host to PCI bridge> mem 0xe8000000-0xefffffff at device 0.0=
on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
fwohci0: <Lucent FW322/323> mem 0xfa000000-0xfa000fff irq 18 at device 10.0=
on pci0
fwohci0: OHCI version 1.0 (ROM=3D1)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:01:99:00:00:03:7c:7b
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me)
firewire0: bus manager 0 (me)
atapci0: <VIA 6420 SATA150 controller> port 0xe000-0xe007,0xe100-0xe103,0xe=
200-0xe207,0xe300-0xe303,0xe400-0xe40f,0xe500-0xe5ff irq 20 at device 15.0 =
on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0=
x376,0xe600-0xe60f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
uhci0: <VIA 83C572 USB controller> port 0xe700-0xe71f irq 21 at device 16.0=
on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xe800-0xe81f irq 21 at device 16.1=
on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xe900-0xe91f irq 21 at device 16.2=
on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xea00-0xea1f irq 21 at device 16.3=
on pci0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfa001000-0xfa0010ff irq 21 at =
device 16.4 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
umass0: Generic USB 2.0 Card Chip, rev 2.00/1.20, addr 2
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pcm0: <VIA VT8237> port 0xeb00-0xebff irq 22 at device 17.5 on pci0
pcm0: <VIA Technologies VIA1617A AC97 Codec>
pcm0: <VIA DXS Enabled: DXS 4 / SGD 1 / REC 1>
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xec00-0xecff mem 0xfa002000-0=
xfa0020ff irq 23 at device 18.0 on pci0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:16:17:12:4f:49
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acp=
i0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 o=
n acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Logitech USB Receiver, rev 1.10/9.10, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
ucom0: vendor 0x067b product 0x2303, rev 1.10/2.02, addr 2
ucom1: Sirius Technologies Roadster II 56 USB, rev 1.00/1.00, addr 2, iclas=
s 2/2
ucom1: data interface 1, has CM over data, has break
ucom1: status change notification available
Timecounter "TSC" frequency 1999784299 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled,=
default to accept, logging disabled
acd0: CDRW <SONY CD-RW CRX300E/KYS2> at ata0-master UDMA33
ad0: 305245MB <WDC WD3200SD-01KNB0 08.05J08> at ata2-master SATA150
ad1: 305245MB <WDC WD3200SD-01KNB0 08.05J08> at ata3-master SATA150
ar0: 305245MB <VIA Tech V-RAID RAID1> status: READY
ar0: disk0 READY (master) using ad0 at ata2-master
ar0: disk1 READY (mirror) using ad1 at ata3-master
ar0: disk2 DOWN no device found for this subdisk
ar0: disk3 DOWN no device found for this subdisk
ar0: disk4 DOWN no device found for this subdisk
ar0: disk5 DOWN no device found for this subdisk
ar0: disk6 DOWN no device found for this subdisk
ar0: disk7 DOWN no device found for this subdisk
cd0 at ata0 bus 0 target 0 lun 0
cd0: <SONY CD-RW CRX300E KYS2> Removable CD-ROM SCSI-0 device=20
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic 2.0 Reader-CF 1.00> Removable Direct Access SCSI-0 device=20
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <Generic 2.0 Reader-SM/xD 1.00> Removable Direct Access SCSI-0 device=
=20
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <Generic 2.0 Reader-SD 1.00> Removable Direct Access SCSI-0 device=20
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim0 bus 0 target 0 lun 3
da3: <Generic 2.0 Reader-MS 1.00> Removable Direct Access SCSI-0 device=20
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0=20
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): Unretryable error
Opened disk da1 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0=20
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): Unretryable error
Opened disk da1 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0=20
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): Unretryable error
Opened disk da1 -> 6
(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0=20
(da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:2): SCSI Status: Check Condition
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
(da2:umass-sim0:0:0:2): Unretryable error
Opened disk da2 -> 6
(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0=20
(da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:2): SCSI Status: Check Condition
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
(da2:umass-sim0:0:0:2): Unretryable error
Opened disk da2 -> 6
(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0=20
(da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:2): SCSI Status: Check Condition
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
(da2:umass-sim0:0:0:2): Unretryable error
Opened disk da2 -> 6
(da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0=20
(da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(da3:umass-sim0:0:0:3): SCSI Status: Check Condition
(da3:umass-sim0:0:0:3): NOT READY asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
(da3:umass-sim0:0:0:3): Unretryable error
Opened disk da3 -> 6
(da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0=20
(da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(da3:umass-sim0:0:0:3): SCSI Status: Check Condition
(da3:umass-sim0:0:0:3): NOT READY asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
(da3:umass-sim0:0:0:3): Unretryable error
Opened disk da3 -> 6
(da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0=20
(da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(da3:umass-sim0:0:0:3): SCSI Status: Check Condition
(da3:umass-sim0:0:0:3): NOT READY asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
(da3:umass-sim0:0:0:3): Unretryable error
Opened disk da3 -> 6
Trying to mount root from ufs:/dev/ar0s1a
WARNING: / was not properly dismounted
WARNING: /var was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /data was not properly dismounted
lpt0: switched to polled standard mode
pid 1576 (perl), uid 26: exited on signal 11 (core dumped)
pid 14611 (perl), uid 26: exited on signal 11 (core dumped)
pid 16553 (perl), uid 26: exited on signal 11 (core dumped)
pid 60556 (perl), uid 26: exited on signal 11 (core dumped)
pid 69380 (perl), uid 26: exited on signal 11 (core dumped)
--Boundary-01=_XWHpE0xhoVY+i+F--
--nextPart1361076.boCKVDLuKA
Content-Type: application/pgp-signature
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2.2 (FreeBSD)
iD8DBQBEpHWX5ZPcIHs/zowRAgfTAJ9YBRDRMQqvD02BVF8wkOjFpAUoFQCfS1QP
TghRCYxZe0eY5hsQ1dDukvw=
=3oaI
-----END PGP SIGNATURE-----
--nextPart1361076.boCKVDLuKA--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200606301021.35529.doconnor>