Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 31 May 1998 14:34:09 +0200 (CEST)
From:      Malte Lance <malte@webmore.com>
To:        (Dirk Meyer) <dirk.meyer@dinoex.sub.org>
Cc:        freebsd-isdn@FreeBSD.ORG
Subject:   RE: still problems with i4b 0.51 (+rework Layer1)
Message-ID:  <XFMail.980531143409.malte@webmore.com>
In-Reply-To: <resent2-AVgdtrX2hM@dmeyer.dinoex.sub.org>

next in thread | previous in thread | raw e-mail | index | archive | help


On 29-Apr-98 Dirk Meyer wrote:
> Hello,
> 
> here my status on i4b-0.51 with layer1-rework patch form this list.

i4b is at version 0.61
How about an upgrade ?

Malte.

> 
> HW: 486/80 with CreatixS0 under FreeBSD 2.2.5-RELEASE
> kernel crash with panic "receving 3"
> just after connect. i can't trace it down, but it runs with BISDN fine.
> 
> Dirk
> 
> -- Dirk Meyer, Im Grund 4, 34317 Habichtswald, Tel 05606/6512 Q (voice)
> -- Origin: DINOEX Habichtswald  -FRG-  [dirk.meyer@dinoex.sub.org]
> 
> --------------------------------------------------
> diff dmesg.bisdn dmesg.i4b
> 5,6c5,6
> < FreeBSD 2.2.5-RELEASE #0: Sat Apr 11 13:33:46 CEST 1998
> <     root@net2.dinoex.sub.de:/src/src/sys/compile/NET2
> ---
>> FreeBSD 2.2.5-RELEASE #0: Wed Apr 29 17:52:35 CEST 1998
>>     root@net2.dinoex.sub.de:/src/src/sys/compile/NET2-I4B
> 9c9
> < avail memory = 30310400 (29600K bytes)
> ---
>> avail memory = 30281728 (29572K bytes)
> 56,57c56,59
> < tel0 at 0xd80 irq 12 maddr 0xd0000 msize 4096 on isa
> < tel0: card type Teles S0 or Creatix S0
> ---
>> isic0 at 0xd80 irq 12 maddr 0xd0000 msize 4096 flags 0x2 on isa
>> isic0: Teles S0/16, Creatix ISDN S0-16 or Niccy 1016
>> isic0: ISAC 2085 Version V2.3 (B3) (IOM-1) (Addr=0xf00d0100)
>> isic0: HSCX 82525 or 21525 Version 2.1 (AddrA=0xf00d0180, AddrB=0xf00d01c0)
> 59a62,68
>> i4b: ISDN call control device attached
>> i4bisppp: 4 ISDN SyncPPP device(s) attached
>> i4bctl: ISDN system control port attached
>> i4bipr: 6 IP over raw HDLC ISDN device(s) attached
>> i4btel: 2 ISDN telephony interface device(s) attached
>> i4brbch: 4 raw B channel access device(s) attached
>> i4btrc: 4 ISDN trace device(s) attached
> 61c70
> < Assigned: TEI = 0xdb = 109
> ---
>> WARNING: / was not properly dismounted.
> --------------------------------------------------
> 
> Copyright (c) 1992-1997 FreeBSD Inc.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>       The Regents of the University of California.  All rights reserved.
> 
> FreeBSD 2.2.5-RELEASE #0: Wed Apr 29 17:52:35 CEST 1998
>     root@net2.dinoex.sub.de:/src/src/sys/compile/NET2-I4B
> CPU: i486DX (486-class CPU)
> real memory  = 33554432 (32768K bytes)
> avail memory = 30281728 (29572K bytes)
> Probing for devices on the ISA bus:
> vt0 at 0x60-0x6f irq 1 on motherboard
> vt0: et4000, 80/132 col, color, 12 scr, mf2-kbd, [R3.20-b24]
> ed0 at 0x300-0x31f irq 10 maddr 0xd8000 msize 16384 on isa
> ed0: address 00:00:c0:02:52:2d, type WD8013EP (16 bit) 
> lpt0 at 0x378-0x37f irq 7 on isa
> lpt0: Interrupt-driven port
> lp0: TCP/IP capable interface
> sio0 at 0x3f8-0x3ff irq 4 on isa
> sio0: type 16550A
> sio1 at 0x2f8-0x2ff irq 3 on isa
> sio1: type 16550A
> sio2 at 0x3e8-0x3ef irq 5 on isa
> sio2: type 16550A
> sio3 at 0x2e8-0x2ef irq 9 on isa
> sio3: type 16550A
> sio4 not found at 0x2f0
> sio5 at 0x3e0-0x3e7 irq 5 on isa
> sio5 not probed due to irq conflict with sio2 at 5
> pca0 on motherboard
> pca0: PC speaker audio driver
> aha0 at 0x330-0x333 irq 11 drq 5 on isa
> aha0 waiting for scsi devices to settle
> (aha0:1:0): "IBM DCAS-34330 S61A" type 0 fixed SCSI 2
> sd0(aha0:1:0): Direct-Access 4134MB (8467200 512 byte sectors)
> sd0(aha0:1:0): with 8205 cyls, 6 heads, and an average 171 sectors/track
> (aha0:2:0): "IBM DCAS-32160W S65A" type 0 fixed SCSI 2
> sd1(aha0:2:0): Direct-Access 2063MB (4226725 512 byte sectors)
> sd1(aha0:2:0): with 8188 cyls, 3 heads, and an average 172 sectors/track
> (aha0:5:0): "IBM DCAS-34330 S65A" type 0 fixed SCSI 2
> sd2(aha0:5:0): Direct-Access 4134MB (8467200 512 byte sectors)
> sd2(aha0:5:0): with 8205 cyls, 6 heads, and an average 171 sectors/track
> (aha0:6:0): "HP HP35480A 1109" type 1 removable SCSI 2
> st0(aha0:6:0): Sequential-Access density code 0x13, 10240-byte blocks,
> write-enabled
> wdc0 at 0x1f0-0x1f7 irq 14 on isa
> wdc0: unit 0 (wd0): <Maxtor 7540 AV>
> wd0: 514MB (1054368 sectors), 1046 cyls, 16 heads, 63 S/T, 512 B/S
> wdc0: unit 1 (wd1): <Maxtor 7540 AV>
> wd1: 514MB (1054368 sectors), 1046 cyls, 16 heads, 63 S/T, 512 B/S
> wdc1 at 0x170-0x177 irq 15 on isa
> wdc1: unit 0 (atapi): <FX400_02/B03>, removable, intr, iordis
> wcd0: 689Kb/sec, 256Kb cache, audio play, 255 volume levels, ejectable tray
> wcd0: no disc inside, unlocked
> fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: 1.44MB 3.5in
> isic0 at 0xd80 irq 12 maddr 0xd0000 msize 4096 flags 0x2 on isa
> isic0: Teles S0/16, Creatix ISDN S0-16 or Niccy 1016
> isic0: ISAC 2085 Version V2.3 (B3) (IOM-1) (Addr=0xf00d0100)
> isic0: HSCX 82525 or 21525 Version 2.1 (AddrA=0xf00d0180, AddrB=0xf00d01c0)
> npx0 flags 0x1 on motherboard
> npx0: INT 16 interface
> i4b: ISDN call control device attached
> i4bisppp: 4 ISDN SyncPPP device(s) attached
> i4bctl: ISDN system control port attached
> i4bipr: 6 IP over raw HDLC ISDN device(s) attached
> i4btel: 2 ISDN telephony interface device(s) attached
> i4brbch: 4 raw B channel access device(s) attached
> i4btrc: 4 ISDN trace device(s) attached
> IP packet filtering initialized, divert enabled, logging limited to 20
> packets/entry
> 
> --------------------------------------------------
> 
>  29 18:00:01 login: ROOT LOGIN (root) ON ttyv0
>  29 18:00:16 /kernel: i4b-L2-i4b_tei_assign: tx TEI ID_Request
>  29 18:00:16 isdnd[80]: DMN rate=45 sec/unit (day=3, beg=18, end=21,
> current=18)
>  29 18:00:16 /kernel: i4b-L2-i4b_tei_rx_frame: TEI ID Assign - TEI = 106
>  29 18:00:16 isdnd[80]: CHD 00001 dialing out from XXX to XXX
>  29 18:00:17 isdnd[80]: CHD 00001 I4BIP0 outgoing call proceeding (ctl 0, ch
> 0)
>  29 18:00:17 isdnd[80]: CHD 00001 I4BIP0 incoming alert
> 
> 
>  29 18:07:47 login: ROOT LOGIN (root) ON ttyv0
>  29 18:09:26 /kernel: i4b-L2-i4b_tei_assign: tx TEI ID_Request
>  29 18:09:26 isdnd[80]: DMN rate=45 sec/unit (day=3, beg=18, end=21,
> current=18)
>  29 18:09:26 /kernel: i4b-L2-i4b_tei_rx_frame: TEI ID Assign - TEI = 107
>  29 18:09:26 isdnd[80]: CHD 00001 dialing out from XXX to XXX
>  29 18:09:26 isdnd[80]: CHD 00001 I4BIP0 outgoing call proceeding (ctl 0, ch
> 0)
>  29 18:09:27 isdnd[80]: CHD 00001 I4BIP0 incoming alert
>  29 18:09:27 isdnd[80]: CHD 00001 I4BIP0 outgoing call active (ctl 0, ch 0)
> 
> --------------------------------------------------
> 
> .
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-isdn" in the body of the message

----------------------------------
E-Mail: Malte Lance <malte@webmore.com>
Date: 31-May-98
Time: 00:36:31
----------------------------------

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-isdn" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?XFMail.980531143409.malte>