Date: Thu, 8 Nov 2018 07:40:43 -0500 From: Jordan Caraballo <jordancaraballo87@gmail.com> To: Ronald Klop <ronald-lists@klop.ws> Cc: freebsd-questions@freebsd.org, freebsd-stable@freebsd.org Subject: Re: sudo not available after configuring ipmi serial over lan Message-ID: <CABoP_STjsaXcbwwM7gRv7dTWz_JSZ2sj5B-zbrMmfv-=EEgNoA@mail.gmail.com> In-Reply-To: <op.zr5t7gbzkndu52@sjakie> References: <CABoP_SQSc2wnJqYXg6AUF1C3_SbyDiLYOa2_0u5oRLcOERZOMg@mail.gmail.com> <op.zr5t7gbzkndu52@sjakie>
next in thread | previous in thread | raw e-mail | index | archive | help
It hangs. No output at all. Latest testing showed that if I do: # sudo su - And hit Ctrl-C two times I get the password prompt, however, when I enter the password it ignores it ( no error message). /var/log/auth.log just records that the user executes the =E2=80=9Csu -=E2= =80=9C command. Just to be clear, when using normal console or kvm, this works fine. On Thu, Nov 8, 2018 at 7:27 AM Ronald Klop <ronald-lists@klop.ws> wrote: > On Wed, 07 Nov 2018 23:56:26 +0100, Jordan Caraballo > <jordancaraballo87@gmail.com> wrote: > > > Hi guys, > > > > After configuring ipmi serial over lan console, I am not being able to > > execute any command related to sudo; not even "sudo su -". I am using > > ttyu0 > > and COM1 on a Dell R530. Everything regarding receiving output and typi= ng > > at the serial console is fine; the only command not working is sudo. > > > What do you mean by 'not working'? Is there an error message? Does it > hang? Do you get logged out? > > Regards, > Ronald. > > > > > > Any ideas? Below are the configurations. > > > > /etc/ttys > > > > # Serial terminals > > # The 'dialup' keyword identifies dialin lines to login, fingerd etc. > > #ttyu0 "/usr/libexec/getty 3wire" vt100 onifconsole secure > > ttyu0 "/usr/libexec/getty std.115200" vt100 on secure > > ttyu1 "/usr/libexec/getty 3wire" vt100 onifconsole secure > > ttyu2 "/usr/libexec/getty 3wire" vt100 onifconsole secure > > ttyu3 "/usr/libexec/getty 3wire" vt100 onifconsole secure > > # Dumb console > > dcons "/usr/libexec/getty std.9600" vt100 off secure > > > > /boot/loader.conf > > > > # ipmi enabled > > ipmi_load=3D"YES" > > # ipmi configurations > > boot_multicons=3D"YES" > > boot_serial=3D"YES" > > # serial configurations for COM1 > > console=3D"comconsole,vidconsole" > > comconsole_speed=3D"115200" > > comconsole_port=3D"0x3F8" > > hint.uart.0.flags=3D"0x00" > > hint.uart.2.flags=3D"0x10" > > > --=20 Jordan
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CABoP_STjsaXcbwwM7gRv7dTWz_JSZ2sj5B-zbrMmfv-=EEgNoA>