Date: Tue, 22 Jan 2002 15:58:09 -0800 (PST) From: Russo Roberto <atm_roberto@yahoo.com> To: freebsd-questions@FreeBSD.ORG Subject: Problem with FORE PCA-200E atm adaptor Message-ID: <20020122235809.55276.qmail@web13002.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
Hi,
I am working to use a FORE PCA-200E atm adapter
with my FreeBSD4.3; I have recompiled the kernel
with the options for ATM and make all the
suggested settings for the configuration, but
not seems work;
I have two PCs with two Fore PCA-200E with
a Fore Switch; IS A STRANGE PROBLEM...!!!!!
the same machines in the same hardware
configuration but with Linux Redhat operating sistem
work with no problems; when I try the two FreeBSD
I can't see connectivity between the two machines;
looking the output of the "atm show stats interface"
command I see that the Atm adapter Send Data with no
problem but not receive nothing;
I try to use one PC with FreeBSD and one PC with
Linux RedHAT;
making a Ping from the FreeBSD to Linux
(Freebsd\>ping 10.255.18.2)
and using on LINUX the TCPDUMP utility I can see the
packet ICMP that coming from the BSD and the ICMP-
Reply that are sending from Linux to the FreeBSD but
they aren't received (the input data of statistics
is always 0); (I can see the ICMP-reply that are
sended from the switch to the FreeBSD machine
looking the switch PDUs statistics)
- anybody can help me to resolve this problem ?
Why the Atm adaptor can't read the data ?
- There is something wrong in the configuration ?
May be the settings for the PVC ?
- there is a way to use a program like tcpdump with
ATM ? (the comand "tcpdump -i atm0" NOT work)
Thank you very much.
These are my configurations file and settings:
--------------------------------------------------
"atm show config" :
Intf Vendor Model Media Bus
Serial No
hfa0 Fore PCA-200E OC-3c PCI
49238
MAC address = 00:20:48:08:c0:56
Hardware version = 1.0.4
Firmware version = 3.0.1
----------------------------------------------------
"atm show interface" :
Interface Sigmgr State
hfa0 SIGPVC ACTIVE
ATM address = -
Network interfaces: atm0
---------------------------------------------------
"atm show VCC" :
Interface VPI VCI AAL Type Dir State
Encaps Owner
hfa0 0 500 AAL5 PVC InOut ACTIVE
LLC/SNAP IP
-----------------------------------------------
"atm show IPVCC" :
Net Intf VPI VCI State Flags IP Address
atm0 0 500 ACTIVE PLM 10.255.18.2
-------------------------------------------------
"atm show stats interface" :
Input Input Input Output Output Output Cmd
Interface PDUs Bytes Errs PDUs Bytes Errs Errs
hfa0 0 0 0 997 90376 0 0
--------------------------------------------------
- the CONFIG for the Kernel:
options ATM_CORE
options ATM_IP
options ATM_SPANS
options ATM_SIGPVC
options ATM_UNI
device hfa
pseudo-device atm
- the RC.conf setting
atm_enable="YES"
atm_netif_hfa0="atm 1"
atm_sigmgr_hfa0="sigpvc"
ifconfig_atm0="inet 10.255.18.1 netmask
255.255.255.0"
- the PVC set up
atm add PVC hfa0 0 500 aal5 LLC/SNAP IP atm0
10.255.18.2
Thanks...!!!!!
Roberto
__________________________________________________
Do You Yahoo!?
Send FREE video emails in Yahoo! Mail!
http://promo.yahoo.com/videomail/
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020122235809.55276.qmail>