Date: Fri, 26 Feb 2016 07:29:25 -0800 From: Adrian Chadd <adrian.chadd@gmail.com> To: richard bader <richard@bader-muenchen.de> Cc: "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org> Subject: Re: ath0 (wlan0) not working in virtulised guest with bhyve Message-ID: <CAJ-Vmo=aNOnJ-H%2BGeG_hcG_13-PTzAEQtpMj=ghwfj4kSHaVtg@mail.gmail.com> In-Reply-To: <56D03253.1040200@bader-muenchen.de> References: <56D03253.1040200@bader-muenchen.de>
next in thread | previous in thread | raw e-mail | index | archive | help
hm, no idea. whats vmstat -ia in the guest say? -a On 26 February 2016 at 03:09, richard bader <richard@bader-muenchen.de> wrote: > Hello, > > using ath0 (and wlan) on the host is work fine. But trying the same on the > guest does not work. > > on the host freebsd 10.2 ist running > on the guest freebsd 10.3 (10.3-BETA2 FreeBSD 10.3-BETA2 #0) is running > > the guest was started with: > /usr/sbin/bhyve -c 2 -m 2048M -A -H -P -g 0 -s 0:0,hostbridge -s > 1:0,lpc -s 2:0,virtio-net,tap0 -s 3:0,virtio-net,tap1 -s > 4:0,virtio-blk,wlan.bader.loc.img -s 5,passthru,5/0/0 -l com1,stdio wlan > > As simple experiment I try to scan for wlans using: > root@wlan:~ #ifconfig wlan0 create wlandev ath0 && ifconfig wlan0 up scan > but no wlan appears. > > the output of 'ifconfig wlan0' is the same as on the working host: > > root@wlan:~ # ifconfig wlan0 > wlan0: flags=8c43<UP,BROADCAST,RUNNING,OACTIVE,SIMPLEX,MULTICAST> metric 0 > mtu 1500 > ether f4:f2:6d:7d:e7:52 > inet6 fe80::f6f2:6dff:fe7d:e752%wlan0 prefixlen 64 scopeid 0x5 > nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> > media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) > status: no carrier > ssid "" channel 13 (2472 MHz 11g) > regdomain 32924 country CN indoor ecm authmode OPEN privacy OFF > txpower 20 bmiss 7 scanvalid 60 protmode CTS wme burst bintval 0 > > the output for 'ssid "" channel 13 (2472 MHz 11g)' changes cyclic. > > > root@wlan:~ # dmesg | grep ath0 > ath0: <Atheros 9287> mem 0xc0010000-0xc001ffff irq 16 at device 5.0 on pci0 > ath0: [HT] enabling HT modes > ath0: [HT] enabling short-GI in 20MHz mode > ath0: [HT] 1 stream STBC receive enabled > ath0: [HT] 1 stream STBC transmit enabled > ath0: [HT] 2 RX streams; 2 TX streams > ath0: AR9287 mac 384.2 RF5133 phy 15.15 > ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 > > > root@wlan:~ # /usr/src/tools/tools/ath/athstats/athstats > 235 data frames received > 989 data frames transmit > 1M current transmit rate > 50 rx failed 'cuz of bad CRC > -0/+0 TDMA slot adjust (usecs, smoothed) > 11 avg recv rssi > -96 rx noise floor > 989 tx frames through raw api > 1 OFDM weak signal detect > 990 ANI disabled OFDM weak signal detect > 990 ANI disabled CCK weak signal threshold > 3 bad FCS > 11 average rssi (beacons only) > Antenna profile: > [0] tx 988 rx 0 > [1] tx 0 rx 235 > > > any hints to get it working? > > thanks > > richard > _______________________________________________ > freebsd-wireless@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-Vmo=aNOnJ-H%2BGeG_hcG_13-PTzAEQtpMj=ghwfj4kSHaVtg>