Date: Tue, 20 Sep 2022 11:40:46 +0200 From: Ludovit Koren <ludovit.koren@gmail.com> To: freebsd-questions@freebsd.org Subject: QLogic ISP2722-based 16/32Gb Fibre Channel Message-ID: <86zgeu8jtt.fsf@gmail.com>
next in thread | raw e-mail | index | archive | help
--=-=-= Content-Type: text/plain Hi, I am running FreeBSD 13.1-STABLE #0 stable/13-n251921-35cdb601016 and trying to configure QLogic ISP2722-based 16/32Gb Fibre Channel. I am not able to initialize the card correctly. In the /boot/device.hints is: #hint.isp.0.gone_device_time="0xB4" #hint.isp.1.gone_device_time="0xB4" hint.isp.0.role="1" hint.isp.1.role="1" hint.isp.0.nofctape="1" hint.isp.1.nofctape="1" hint.isp.0.topology="nport-only" hint.isp.1.topology="nport-only" hint.isp.0.debug="0xffff" hint.isp.0.fwload_disable="1" hint.isp.1.fwload_disable="1" The boot output is in the attached file. I could not find any relevant documentation about the configuration of the card. Could anybody point me to the right direction? Any help greatly appreciated. Regards, lk --=-=-= Content-Type: text/plain Content-Disposition: inline; filename=isp.txt isp0: RISC2HOST ISR 0x4000c010 isp0: OUT mbox 0 = 0x4000 isp0: OUT mbox 1 = 0x0009 sp0: OUT mbox 2 = 0x0020 isp0: OUT mbox 3 = 0x0008 isp0: OUT mbox 4 = 0x0000 isp0: Mailbox Command 'ABOUT FIRMWARE' isp0: IN mbox 0 = 0x0008 isp0: RISC2HOST ISR 0x40000010 isp0: RISC2HOST ISR 0x4000c010 isp0: OUT mbox 0 = 0x4000 isp0: OUT mbox 1 = 0x0008 isp0: OUT mbox 2 = 0x0008 isp0: OUT mbox 3 = 0x00e6 isp0: OUT mbox 4 = 0xffff isp0: OUT mbox 5 = 0x0015 isp0: OUT mbox 6 = 0xd0d5 isp0: OUT mbox 15 = 0x785a isp0: OUT mbox 16 = 0x0206 isp0: OUT mbox 17 = 0x0000 isp0: Board Type 2700, Chip Revision 0x1, resident F/W Revision 8.8.230 isp0: Attributes: Class2 MultiID T10CRC MQ MSIX VP0_Decoupling HotFW EXMOFF NPMOFF DIFCHOP ASICTMP ATIOMQ (unknown 0x0000020078020000) isp0: Mailbox Command 'GET RESOURCE COUNT' isp0: IN mbox 0 = 0x0042 isp0: RISC2HOST ISR 0x40000010 isp0: RISC2HOST ISR 0x4000c010 isp0: OUT mbox 0 = 0x4000 isp0: OUT mbox 1 = 0x0000 isp0: OUT mbox 2 = 0x0000 isp0: OUT mbox 3 = 0x0800 isp0: OUT mbox 6 = 0x0800 isp0: OUT mbox 7 = 0x172e isp0: OUT mbox 8 = 0x0000 isp0: OUT mbox 9 = 0x0000 isp0: OUT mbox 10 = 0x1739 isp0: OUT mbox 11 = 0x00fe isp0: OUT mbox 12 = 0xbead isp0: 2048 max I/O command limit set isp0: request area @ 0x27680000/0x80000 isp0: response area @ 0x27550000/0x10000 isp0: NVRAM 0x51402ec01729ae83 0x51402ec01729ae82 maxframelen 2048 isp0: NVRAM loopid 0 fwopt1 0x6006 fwopt2 0x1026 fwopt3 0x4000 isp0: Chan 0 0x51402ec01729ae83/0x51402ec01729ae82 Role Target isp0: Mailbox Command 'SET FIRMWARE OPTIONS' isp0: IN mbox 0 = 0x0038 isp0: IN mbox 1 = 0x0001 isp0: IN mbox 2 = 0x0000 isp0: IN mbox 3 = 0x0000 isp0: RISC2HOST ISR 0x40000010 isp0: RISC2HOST ISR 0x4000c010 isp0: OUT mbox 0 = 0x4000 isp0: Setting ICB Node 0x51402ec01729ae83 Port 0x51402ec01729ae82 isp0: isp_init: fwopt1 0x6036 fwopt2 0x4400016 fwopt3 0x4022 isp0: isp_init: rqst 0000000027680000 rsp 0000000027550000 isp0: isp_init: isp0: 0x00000000: 01 00 00 00 00 08 00 00 00 00 00 00 51 40 2e c0 isp0: 0x00000010: 17 29 ae 82 51 40 2e c0 17 29 ae 83 00 00 00 00 isp0: 0x00000020: 03 00 00 00 00 04 00 20 00 00 00 00 00 00 68 27 isp0: 0x00000030: 00 00 00 00 00 00 55 27 00 00 00 00 00 00 00 00 isp0: 0x00000040: 00 00 00 00 01 00 02 00 00 00 00 00 00 00 00 00 isp0: 0x00000050: 00 00 00 00 00 00 00 00 00 00 0a 00 36 60 00 00 isp0: 0x00000060: 16 00 40 04 22 40 00 00 00 00 00 00 00 00 00 00 isp0: 0x00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 isp0: INIT F/W from 0000000014fb2000 isp0: Mailbox Command 'INIT FIRMWARE' isp0: IN mbox 0 = 0x0060 isp0: IN mbox 1 = 0x0000 isp0: IN mbox 2 = 0x14fb isp0: IN mbox 3 = 0x2000 isp0: IN mbox 6 = 0x0000 isp0: IN mbox 7 = 0x0000 isp0: RISC2HOST ISR 0x40000010 isp0: RISC2HOST ISR 0x4006c011 isp0: OUT mbox 0 = 0x4006 isp0: OUT mbox 1 = 0x0000 isp0: OUT mbox 2 = 0x14fb isp0: OUT mbox 3 = 0x2000 isp0: Mailbox Command 'INIT FIRMWARE' failed (COMMAND PARAMETER ERROR) isp0: isp_reinit: cannot init card isp0: RISC2HOST ISR 0x40060011 device_attach: isp0 attach returned 6 --=-=-=--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?86zgeu8jtt.fsf>