From owner-svn-src-all@FreeBSD.ORG Tue Jan 3 00:26:12 2012 Return-Path: Delivered-To: svn-src-all@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 17D44106566B; Tue, 3 Jan 2012 00:26:12 +0000 (UTC) (envelope-from yongari@FreeBSD.org) Received: from svn.freebsd.org (svn.freebsd.org [IPv6:2001:4f8:fff6::2c]) by mx1.freebsd.org (Postfix) with ESMTP id 008258FC12; Tue, 3 Jan 2012 00:26:12 +0000 (UTC) Received: from svn.freebsd.org (localhost [127.0.0.1]) by svn.freebsd.org (8.14.4/8.14.4) with ESMTP id q030QBHV096695; Tue, 3 Jan 2012 00:26:11 GMT (envelope-from yongari@svn.freebsd.org) Received: (from yongari@localhost) by svn.freebsd.org (8.14.4/8.14.4/Submit) id q030QBMS096692; Tue, 3 Jan 2012 00:26:11 GMT (envelope-from yongari@svn.freebsd.org) Message-Id: <201201030026.q030QBMS096692@svn.freebsd.org> From: Pyun YongHyeon Date: Tue, 3 Jan 2012 00:26:11 +0000 (UTC) To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-7@freebsd.org X-SVN-Group: stable-7 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Cc: Subject: svn commit: r229356 - stable/7/sys/dev/bge X-BeenThere: svn-src-all@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: "SVN commit messages for the entire src tree \(except for " user" and " projects" \)" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 03 Jan 2012 00:26:12 -0000 Author: yongari Date: Tue Jan 3 00:26:11 2012 New Revision: 229356 URL: http://svn.freebsd.org/changeset/base/229356 Log: MFC r226814-226815,226820-226821,226864,226866-226867: r226814: Rename definition of BGE_SOFTWARE_GENCOMM_* to more readable ones. The origin of GENCOMM seems to come from Alteon Tigon Host/NIC interface definition where it defines general communications region which is active when firmware is loaded and running. This region was used in communication between the host and processor internal to the Tigon chip. Broadcom data sheet also defines the region as 'Software Gencomm' in NetXtreme memory map but lacks detailed description of its interface so it was hard to know which ones are used for which interface. This change shall slightly enhance readability. No functional changes. r226815: Define MAC address mail box and use it instead of using hard-coded value. r226820: Offset 0x6810 is RX-RISC event register. Rename BGE_CPU_EVENT with BGE_RX_CPU_EVENT for readability. Additionally define BGE_TX_CPU_EVENT for TX-RSIC event register(BCM570[0-4] only). r226821: SRAM offset 0x0C04 is used by driver to inform the IPMI/ASF firmware about the various driver events like load, unload, reset, suspend, restart, and ioctl operations. Define driver's event rather than using hard-coded values. We don't still send suspend/resume event to firmware. Previously bge(4) used BGE_SDI_STATUS to send events. Because driver has to access firmware mail box to inform current state, using BGE_SDI_STATUS register was wrong. The end result was the same as BGE_SDI_STATUS is 0x0C04. No functional changes. r226864: Rename BGE_FW_DRV_ALIVE/BGE_FW_PAUSE to BGE_FW_CMD_DRV_ALIVE/BGE_FW_CMD_PAUSE. Also add more firmware commands(not used yet). No functional changes. r226866: Rename hard-coded value 1 << 14 with BGE_RX_CPU_DRV_EVENT. This bit(SW event 7 in publicly available data sheet) is used to make RX CPU handle a firmware command and the bit is automatically cleared after RX CPU completed the command. Generally firmware command takes the following steps. 1. Write BGE_SRAM_FW_CMD_MB with a command. 2. Write BGE_SRAM_FW_CMD_LEN_MB with the length of the command in bytes. 3. Write BGE_SRAM_FW_CMD_DATA_MB with actual command data. 4. Generate BGE_RX_CPU_EVENT and let firmware handle the command. 5. Wait for the ACK of the firmware command. No functional changes. r226867: Define BGE_FW_HB_TIMEOUT_SEC and remove one more magic value. bge(4) sends BGE_FW_CMD_DRV_ALIVE command to firmware every 2 seconds. BGE_FW_CMD_DRV_ALIVE command requires 4 bytes data. This data contains timeout value in seconds until the next BGE_FW_CMD_DRV_ALIVE command. Broadcom recommends driver set the value 3 times longer than the interval that it sends BGE_FW_CMD_DRV_ALIVE. Currently bge(4) uses 3 seconds so probably we have to increase it in future and use different ALIVE command(e.g. BGE_FW_CMD_DRV_ALIVE3). No functional changes. Modified: stable/7/sys/dev/bge/if_bge.c stable/7/sys/dev/bge/if_bgereg.h Directory Properties: stable/7/sys/ (props changed) stable/7/sys/cddl/contrib/opensolaris/ (props changed) stable/7/sys/contrib/dev/acpica/ (props changed) stable/7/sys/contrib/pf/ (props changed) Modified: stable/7/sys/dev/bge/if_bge.c ============================================================================== --- stable/7/sys/dev/bge/if_bge.c Tue Jan 3 00:24:44 2012 (r229355) +++ stable/7/sys/dev/bge/if_bge.c Tue Jan 3 00:26:11 2012 (r229356) @@ -1309,15 +1309,17 @@ bge_sig_pre_reset(struct bge_softc *sc, * Some chips don't like this so only do this if ASF is enabled */ if (sc->bge_asf_mode) - bge_writemem_ind(sc, BGE_SOFTWARE_GENCOMM, BGE_MAGIC_NUMBER); + bge_writemem_ind(sc, BGE_SRAM_FW_MB, BGE_SRAM_FW_MB_MAGIC); if (sc->bge_asf_mode & ASF_NEW_HANDSHAKE) { switch (type) { case BGE_RESET_START: - bge_writemem_ind(sc, BGE_SDI_STATUS, 0x1); /* START */ + bge_writemem_ind(sc, BGE_SRAM_FW_DRV_STATE_MB, + BGE_FW_DRV_STATE_START); break; case BGE_RESET_STOP: - bge_writemem_ind(sc, BGE_SDI_STATUS, 0x2); /* UNLOAD */ + bge_writemem_ind(sc, BGE_SRAM_FW_DRV_STATE_MB, + BGE_FW_DRV_STATE_UNLOAD); break; } } @@ -1330,11 +1332,13 @@ bge_sig_post_reset(struct bge_softc *sc, if (sc->bge_asf_mode & ASF_NEW_HANDSHAKE) { switch (type) { case BGE_RESET_START: - bge_writemem_ind(sc, BGE_SDI_STATUS, 0x80000001); + bge_writemem_ind(sc, BGE_SRAM_FW_DRV_STATE_MB, + BGE_FW_DRV_STATE_START_DONE); /* START DONE */ break; case BGE_RESET_STOP: - bge_writemem_ind(sc, BGE_SDI_STATUS, 0x80000002); + bge_writemem_ind(sc, BGE_SRAM_FW_DRV_STATE_MB, + BGE_FW_DRV_STATE_UNLOAD_DONE); break; } } @@ -1347,10 +1351,12 @@ bge_sig_legacy(struct bge_softc *sc, int if (sc->bge_asf_mode) { switch (type) { case BGE_RESET_START: - bge_writemem_ind(sc, BGE_SDI_STATUS, 0x1); /* START */ + bge_writemem_ind(sc, BGE_SRAM_FW_DRV_STATE_MB, + BGE_FW_DRV_STATE_START); break; case BGE_RESET_STOP: - bge_writemem_ind(sc, BGE_SDI_STATUS, 0x2); /* UNLOAD */ + bge_writemem_ind(sc, BGE_SRAM_FW_DRV_STATE_MB, + BGE_FW_DRV_STATE_UNLOAD); break; } } @@ -1362,12 +1368,13 @@ bge_stop_fw(struct bge_softc *sc) int i; if (sc->bge_asf_mode) { - bge_writemem_ind(sc, BGE_SOFTWARE_GENCOMM_FW, BGE_FW_PAUSE); - CSR_WRITE_4(sc, BGE_CPU_EVENT, - CSR_READ_4(sc, BGE_CPU_EVENT) | (1 << 14)); + bge_writemem_ind(sc, BGE_SRAM_FW_CMD_MB, BGE_FW_CMD_PAUSE); + CSR_WRITE_4(sc, BGE_RX_CPU_EVENT, + CSR_READ_4(sc, BGE_RX_CPU_EVENT) | BGE_RX_CPU_DRV_EVENT); for (i = 0; i < 100; i++ ) { - if (!(CSR_READ_4(sc, BGE_CPU_EVENT) & (1 << 14))) + if (!(CSR_READ_4(sc, BGE_RX_CPU_EVENT) & + BGE_RX_CPU_DRV_EVENT)) break; DELAY(10); } @@ -3081,9 +3088,9 @@ bge_attach(device_t dev) } sc->bge_asf_mode = 0; - if (bge_allow_asf && (bge_readmem_ind(sc, BGE_SOFTWARE_GENCOMM_SIG) - == BGE_MAGIC_NUMBER)) { - if (bge_readmem_ind(sc, BGE_SOFTWARE_GENCOMM_NICCFG) + if (bge_allow_asf && (bge_readmem_ind(sc, BGE_SRAM_DATA_SIG) == + BGE_SRAM_DATA_SIG_MAGIC)) { + if (bge_readmem_ind(sc, BGE_SRAM_DATA_CFG) & BGE_HWCFG_ASF) { sc->bge_asf_mode |= ASF_ENABLE; sc->bge_asf_mode |= ASF_STACKUP; @@ -3197,8 +3204,8 @@ bge_attach(device_t dev) * by its PCI subsystem ID, as we do below for the SysKonnect * SK-9D41. */ - if (bge_readmem_ind(sc, BGE_SOFTWARE_GENCOMM_SIG) == BGE_MAGIC_NUMBER) - hwcfg = bge_readmem_ind(sc, BGE_SOFTWARE_GENCOMM_NICCFG); + if (bge_readmem_ind(sc, BGE_SRAM_DATA_SIG) == BGE_SRAM_DATA_SIG_MAGIC) + hwcfg = bge_readmem_ind(sc, BGE_SRAM_DATA_CFG); else if ((sc->bge_flags & BGE_FLAG_EADDR) && (sc->bge_asicrev != BGE_ASICREV_BCM5906)) { if (bge_read_eeprom(sc, (caddr_t)&hwcfg, BGE_EE_HWCFG_OFFSET, @@ -3433,9 +3440,9 @@ bge_reset(struct bge_softc *sc) /* * Write the magic number to SRAM at offset 0xB50. * When firmware finishes its initialization it will - * write ~BGE_MAGIC_NUMBER to the same location. + * write ~BGE_SRAM_FW_MB_MAGIC to the same location. */ - bge_writemem_ind(sc, BGE_SOFTWARE_GENCOMM, BGE_MAGIC_NUMBER); + bge_writemem_ind(sc, BGE_SRAM_FW_MB, BGE_SRAM_FW_MB_MAGIC); reset = BGE_MISCCFG_RESET_CORE_CLOCKS | BGE_32BITTIME_66MHZ; @@ -3560,8 +3567,8 @@ bge_reset(struct bge_softc *sc) */ for (i = 0; i < BGE_TIMEOUT; i++) { DELAY(10); - val = bge_readmem_ind(sc, BGE_SOFTWARE_GENCOMM); - if (val == ~BGE_MAGIC_NUMBER) + val = bge_readmem_ind(sc, BGE_SRAM_FW_MB); + if (val == ~BGE_SRAM_FW_MB_MAGIC) break; } @@ -4096,12 +4103,14 @@ bge_asf_driver_up(struct bge_softc *sc) sc->bge_asf_count --; else { sc->bge_asf_count = 2; - bge_writemem_ind(sc, BGE_SOFTWARE_GENCOMM_FW, - BGE_FW_DRV_ALIVE); - bge_writemem_ind(sc, BGE_SOFTWARE_GENNCOMM_FW_LEN, 4); - bge_writemem_ind(sc, BGE_SOFTWARE_GENNCOMM_FW_DATA, 3); - CSR_WRITE_4(sc, BGE_CPU_EVENT, - CSR_READ_4(sc, BGE_CPU_EVENT) | (1 << 14)); + bge_writemem_ind(sc, BGE_SRAM_FW_CMD_MB, + BGE_FW_CMD_DRV_ALIVE); + bge_writemem_ind(sc, BGE_SRAM_FW_CMD_LEN_MB, 4); + bge_writemem_ind(sc, BGE_SRAM_FW_CMD_DATA_MB, + BGE_FW_HB_TIMEOUT_SEC); + CSR_WRITE_4(sc, BGE_RX_CPU_EVENT, + CSR_READ_4(sc, BGE_RX_CPU_EVENT) | + BGE_RX_CPU_DRV_EVENT); } } } @@ -5934,11 +5943,11 @@ bge_get_eaddr_mem(struct bge_softc *sc, { uint32_t mac_addr; - mac_addr = bge_readmem_ind(sc, 0x0c14); + mac_addr = bge_readmem_ind(sc, BGE_SRAM_MAC_ADDR_HIGH_MB); if ((mac_addr >> 16) == 0x484b) { ether_addr[0] = (uint8_t)(mac_addr >> 8); ether_addr[1] = (uint8_t)mac_addr; - mac_addr = bge_readmem_ind(sc, 0x0c18); + mac_addr = bge_readmem_ind(sc, BGE_SRAM_MAC_ADDR_LOW_MB); ether_addr[2] = (uint8_t)(mac_addr >> 24); ether_addr[3] = (uint8_t)(mac_addr >> 16); ether_addr[4] = (uint8_t)(mac_addr >> 8); Modified: stable/7/sys/dev/bge/if_bgereg.h ============================================================================== --- stable/7/sys/dev/bge/if_bgereg.h Tue Jan 3 00:24:44 2012 (r229355) +++ stable/7/sys/dev/bge/if_bgereg.h Tue Jan 3 00:26:11 2012 (r229356) @@ -71,12 +71,15 @@ #define BGE_STATS_BLOCK_END 0x00000AFF #define BGE_STATUS_BLOCK 0x00000B00 #define BGE_STATUS_BLOCK_END 0x00000B4F -#define BGE_SOFTWARE_GENCOMM 0x00000B50 -#define BGE_SOFTWARE_GENCOMM_SIG 0x00000B54 -#define BGE_SOFTWARE_GENCOMM_NICCFG 0x00000B58 -#define BGE_SOFTWARE_GENCOMM_FW 0x00000B78 -#define BGE_SOFTWARE_GENNCOMM_FW_LEN 0x00000B7C -#define BGE_SOFTWARE_GENNCOMM_FW_DATA 0x00000B80 +#define BGE_SRAM_FW_MB 0x00000B50 +#define BGE_SRAM_DATA_SIG 0x00000B54 +#define BGE_SRAM_DATA_CFG 0x00000B58 +#define BGE_SRAM_FW_CMD_MB 0x00000B78 +#define BGE_SRAM_FW_CMD_LEN_MB 0x00000B7C +#define BGE_SRAM_FW_CMD_DATA_MB 0x00000B80 +#define BGE_SRAM_FW_DRV_STATE_MB 0x00000C04 +#define BGE_SRAM_MAC_ADDR_HIGH_MB 0x00000C14 +#define BGE_SRAM_MAC_ADDR_LOW_MB 0x00000C18 #define BGE_SOFTWARE_GENCOMM_END 0x00000FFF #define BGE_UNMAPPED 0x00001000 #define BGE_UNMAPPED_END 0x00001FFF @@ -87,8 +90,24 @@ #define BGE_SEND_RING_1_TO_4_END 0x00005FFF /* Firmware interface */ -#define BGE_FW_DRV_ALIVE 0x00000001 -#define BGE_FW_PAUSE 0x00000002 +#define BGE_SRAM_DATA_SIG_MAGIC 0x4B657654 /* 'KevT' */ + +#define BGE_FW_CMD_DRV_ALIVE 0x00000001 +#define BGE_FW_CMD_PAUSE 0x00000002 +#define BGE_FW_CMD_IPV4_ADDR_CHANGE 0x00000003 +#define BGE_FW_CMD_IPV6_ADDR_CHANGE 0x00000004 +#define BGE_FW_CMD_LINK_UPDATE 0x0000000C +#define BGE_FW_CMD_DRV_ALIVE2 0x0000000D +#define BGE_FW_CMD_DRV_ALIVE3 0x0000000E + +#define BGE_FW_HB_TIMEOUT_SEC 3 + +#define BGE_FW_DRV_STATE_START 0x00000001 +#define BGE_FW_DRV_STATE_START_DONE 0x80000001 +#define BGE_FW_DRV_STATE_UNLOAD 0x00000002 +#define BGE_FW_DRV_STATE_UNLOAD_DONE 0x80000002 +#define BGE_FW_DRV_STATE_WOL 0x00000003 +#define BGE_FW_DRV_STATE_SUSPEND 0x00000004 /* Mappings for internal memory configuration */ #define BGE_STD_RX_RINGS 0x00006000 @@ -1875,7 +1894,8 @@ #define BGE_MODE_CTL 0x6800 #define BGE_MISC_CFG 0x6804 #define BGE_MISC_LOCAL_CTL 0x6808 -#define BGE_CPU_EVENT 0x6810 +#define BGE_RX_CPU_EVENT 0x6810 +#define BGE_TX_CPU_EVENT 0x6820 #define BGE_EE_ADDR 0x6838 #define BGE_EE_DATA 0x683C #define BGE_EE_CTL 0x6840 @@ -1883,6 +1903,8 @@ #define BGE_EE_DELAY 0x6848 #define BGE_FASTBOOT_PC 0x6894 +#define BGE_RX_CPU_DRV_EVENT 0x00004000 + /* * NVRAM Control registers */ @@ -2052,10 +2074,10 @@ * This magic number is written to the firmware mailbox at 0xb50 * before a software reset is issued. After the internal firmware * has completed its initialization it will write the opposite of - * this value, ~BGE_MAGIC_NUMBER, to the same location, allowing the - * driver to synchronize with the firmware. + * this value, ~BGE_SRAM_FW_MB_MAGIC, to the same location, + * allowing the driver to synchronize with the firmware. */ -#define BGE_MAGIC_NUMBER 0x4B657654 +#define BGE_SRAM_FW_MB_MAGIC 0x4B657654 typedef struct { uint32_t bge_addr_hi;