Date: Tue, 10 Jul 2001 22:05:29 -0400 From: User & Ian Patrick Thomas <ipt@adelphia.net> To: Scott Bolte <listS+freebsd-questions@niss.com> Cc: freebsd-questions@freebsd.org Subject: Re: FBSD 4.3 and XFree86 4.1, matrox g400 Message-ID: <20010710220529.A23368@scraemondaemon.my.domain> In-Reply-To: <200107110145.UAA52482@crag.niss.com>; from listS%2Bfreebsd-questions@niss.com on Tue, Jul 10, 2001 at 08:45:52PM -0500 References: <200107110145.UAA52482@crag.niss.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--zhXaljGHf11kAtnf Content-Type: text/plain; charset=us-ascii Content-Disposition: inline I've sent startx's output as an attachment. Ian On Tue, Jul 10, 2001 at 08:45:52PM -0500, Scott Bolte wrote: > Ian, > > You still might be able to help Bruno and I. For both of us > the server croaks right after the following line is written > to the log. > > > (==) MGA(1): Write-combining range (0xf5000000,0x4000) was already clear > > Could you please share your full log file so we can see what > operation might be coming next? > > Either of the following commands should enable a ton of status > messages: > > startx -- -verbose 40 |& tee xfree86.log > > Or, if you run as root: > > startx -- -logverbose 40 > > In the latter case the log results will be in > /var/run/XFree86.#.log. > > Thanks, > > Scott > > On Tue, 10 Jul 2001 21:20:03 -0400 (EDT), User Ipt Ian Patrick Thomas wrote: > > I'm running XFree 4.0.3_3 from the ports on a 4.3 system. I > > installed X from the ports. I've personally never gotten 3.3.6 to work > > with my Matrox G400 32MB AGP card. It installs fine but there is alot > > of junk on the screen. The graphics just don't look right. This may > > be a Matrox problem. Have you tried it without the hal module? Maybe > > try leaving out certain modules that are loaded and see if that solves > > the problem. Sorry I couldn't be more help. > > > > Ian --zhXaljGHf11kAtnf Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=x_log XFree86 Version 4.0.3 / X Window System (protocol Version 11, revision 0, vendor release 6400) Release Date: 16 March 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Operating System: FreeBSD 4.3-RELEASE i386 [ELF] Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Tue Jul 10 21:51:45 2001 (==) Using config file: "/etc/X11/XF86Config" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (??) unknown. (==) ServerLayout "XFree86 Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) XKB: model: "pc102" (**) XKB: layout: "us" (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (**) ModulePath set to "/usr/X11R6/lib/modules" (--) Using syscons driver with X support (version 2.0) (--) using VT number 12 (WW) xf86OpenConsole: VT_WAITACTIVE failed (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.0.3, module version = 0.1.0 (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.0.3, module version = 0.1.0 (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (--) PCI:*(1:0:0) Matrox MGA G400 AGP rev 4, Mem @ 0xe8000000/25, 0xe4000000/14, 0xe5000000/23 (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libxie.a (II) Module xie: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a (II) Module pex5: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module dri: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/freebsd/libdrm.a (II) Module drm: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a (II) Module record: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.13.0 (II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o (II) Module mga: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.0.0 (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400 (**) Chipset override: mgag400 (**) Chipset mgag400 found (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.0.3, module version = 0.1.0 (**) MGA(0): Depth 24, (--) framebuffer bpp 24 (==) MGA(0): RGB weight 888 (WW) Warning, couldn't open module mga_hal (EE) MGA: Failed to load module "mga_hal" (module does not exist, 0) (II) MGA(0): Matrox HAL module not found - using builtin mode setup instead (**) MGA(0): Chipset: "mgag400" (II) MGA(0): Offscreen memory usage will be limited to 512 lines if the DRI is enabled. (==) MGA(0): Using AGP Mode 1x (--) MGA(0): Linear framebuffer at 0xE8000000 (--) MGA(0): MMIO registers at 0xE4000000 (--) MGA(0): Pseudo-DMA transfer window at 0xE5000000 (==) MGA(0): BIOS at 0xC0000 (--) MGA(0): Video BIOS info block at offset 0x07A80 (WW) MGA(0): Video BIOS info block not detected! (==) MGA(0): Write-combining range (0xe4000000,0x4000) was already clear (==) MGA(0): Write-combining range (0xe8000000,0x2000000) (==) MGA(0): Write-combining range (0xe5000000,0x800000) was already clear (--) MGA(0): VideoRAM: 32768 kByte (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libi2c.a (II) Module i2c: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.2.0 (==) MGA(0): Write-combining range (0xe4000000,0x4000) was already clear (==) MGA(0): Write-combining range (0xe8000000,0x2000000) (==) MGA(0): Write-combining range (0xe5000000,0x800000) was already clear (==) MGA(0): Write-combining range (0xa0000,0x10000) was already clear (II) MGA(0): I2C bus "DDC" initialized. (II) MGA(0): I2C device "DDC:ddc2" registered. (II) MGA(0): I2C device "DDC:ddc2" removed. (II) MGA(0): I2C device "DDC:ddc2" registered. (II) MGA(0): I2C device "DDC:ddc2" removed. (II) MGA(0): I2C Monitor info: 0x8755400 (II) MGA(0): Manufacturer: VSC Model: 5a43 Serial#: 4864 (II) MGA(0): Year: 2000 Week: 33 (II) MGA(0): EDID Version: 1.2 (II) MGA(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) MGA(0): Signal levels configurable (II) MGA(0): Sync: Separate CompositeSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen (II) MGA(0): Max H-Image Size [cm]: horiz.: 32 vert.: 24 (II) MGA(0): Gamma: 2.80 (II) MGA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) MGA(0): First detailed timing is preferred mode (II) MGA(0): GTF timings supported (II) MGA(0): redX: 0.652 redY: 0.321 greenX: 0.281 greenY: 0.616 (II) MGA(0): blueX: 0.141 blueY: 0.057 whiteX: 0.283 whiteY: 0.297 (II) MGA(0): Supported VESA Video Modes: (II) MGA(0): 720x400@70Hz (II) MGA(0): 720x400@88Hz (II) MGA(0): 640x480@60Hz (II) MGA(0): 640x480@67Hz (II) MGA(0): 640x480@72Hz (II) MGA(0): 640x480@75Hz (II) MGA(0): 800x600@56Hz (II) MGA(0): 800x600@60Hz (II) MGA(0): 800x600@72Hz (II) MGA(0): 800x600@75Hz (II) MGA(0): 832x624@75Hz (II) MGA(0): 1024x768@87Hz (interlaced) (II) MGA(0): 1024x768@60Hz (II) MGA(0): 1024x768@70Hz (II) MGA(0): 1024x768@75Hz (II) MGA(0): 1152x870@75Hz (II) MGA(0): Manufacturer's mask: 0 (II) MGA(0): Supported Future Video Modes: (II) MGA(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833 (II) MGA(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853 (II) MGA(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881 (II) MGA(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) MGA(0): #4: hsize: 1280 vsize 960 refresh: 60 vid: 16513 (II) MGA(0): #5: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) MGA(0): Supported additional Video Mode: (II) MGA(0): clock: 78.8 MHz Image Size: 310 x 232 mm (II) MGA(0): h_active: 1024 h_sync: 1040 h_sync_end 1136 h_blank_end 1312 h_border: 0 (II) MGA(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 800 v_border: 0 (II) MGA(0): Serial No: CZ03304864 (II) MGA(0): Ranges: V min: 50 V max: 180 Hz, H min: 30 H max: 70 kHz, PixClock max 100 kHz (II) MGA(0): Monitor name: A70 (II) MGA(0): end of I2C Monitor info (==) MGA(0): Using gamma correction (1.0, 1.0, 1.0) (==) MGA(0): Min pixel clock is 12 MHz (==) MGA(0): Max pixel clock is 300 MHz (II) MGA(0): Monitor0: Using hsync range of 30.00-70.00 kHz (II) MGA(0): Monitor0: Using vrefresh range of 50.00-180.00 Hz (II) MGA(0): Clock range: 12.00 to 300.00 MHz (WW) MGA(0): Default mode "1280x960" deleted (hsync out of range) (WW) MGA(0): Default mode "1280x1024" deleted (hsync out of range) (WW) MGA(0): Default mode "1280x1024" deleted (hsync out of range) (WW) MGA(0): Default mode "1600x1200" deleted (hsync out of range) (WW) MGA(0): Default mode "1600x1200" deleted (hsync out of range) (WW) MGA(0): Default mode "1600x1200" deleted (hsync out of range) (WW) MGA(0): Default mode "1600x1200" deleted (hsync out of range) (WW) MGA(0): Default mode "1600x1200" deleted (hsync out of range) (WW) MGA(0): Default mode "1792x1344" deleted (hsync out of range) (WW) MGA(0): Default mode "1792x1344" deleted (hsync out of range) (WW) MGA(0): Default mode "1856x1392" deleted (hsync out of range) (WW) MGA(0): Default mode "1856x1392" deleted (hsync out of range) (WW) MGA(0): Default mode "1920x1440" deleted (hsync out of range) (WW) MGA(0): Default mode "1920x1440" deleted (hsync out of range) (--) MGA(0): Virtual size is 1280x1024 (pitch 1280) (**) MGA(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz (**) MGA(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz (**) MGA(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz (**) MGA(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz (--) MGA(0): Display dimensions: (32, 24) cm (--) MGA(0): DPI set to (101, 108) (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="The XFree86 Project" compiled for 4.0.3, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.0.3, module version = 0.1.0 (==) Depth 24 pixmap format is 32 bpp (==) MGA(0): Write-combining range (0xe4000000,0x4000) was already clear (==) MGA(0): Write-combining range (0xe8000000,0x2000000) (==) MGA(0): Write-combining range (0xe5000000,0x800000) was already clear (==) MGA(0): Write-combining range (0xa0000,0x10000) was already clear (--) MGA(0): 16 DWORD fifo (==) MGA(0): Default visual is TrueColor (II) MGA(0): [drm] bpp: 24 depth: 24 (II) MGA(0): [drm] Direct rendering only supported in 16 and 32 bpp modes (II) MGA(0): Using 3345 lines for offscreen memory. (II) MGA(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles Solid filled trapezoids 8x8 mono pattern filled rectangles 8x8 mono pattern filled trapezoids Indirect CPU to Screen color expansion Screen to Screen color expansion Solid Lines Dashed Lines Scanline Image Writes Offscreen Pixmaps Driver provided FillMono8x8PatternRects replacement Setting up tile and stipple cache: 32 128x128 slots 25 256x256 slots 8 512x512 slots (==) MGA(0): Backing store disabled (==) MGA(0): Silken mouse enabled (II) MGA(0): Using overlay video (II) MGA(0): direct rendering disabled (**) Mouse0: Protocol: "Auto" (**) Mouse0: Core Pointer (==) Mouse0: Buttons: 3 (II) Keyboard "Keyboard0" handled by legacy driver (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) (WW) fcntl(7, F_SETOWN): Inappropriate ioctl for device Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list! Could not init font path element /usr/X11R6/lib/X11/fonts/Type1/, removing from list! BScreen::BScreen: managing screen 0 using visual 0x23, depth 24 (WW) fcntl(7, F_SETOWN): Inappropriate ioctl for device (WW) fcntl(7, F_SETOWN): Inappropriate ioctl for device BImageControl::~BImageControl: pixmap cache - releasing 93 pixmaps waiting for X server to shut down --zhXaljGHf11kAtnf-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010710220529.A23368>