Date: Sat, 23 Dec 2006 11:17:18 -0800 From: Nate Lawson <nate@root.org> To: Abdullah Al-Marrie <almarrie@gmail.com> Cc: freebsd-acpi@freebsd.org Subject: Re: (SOLVED) was RE: Acer Aspire 5102 WLMi with Turion 64 X2 FreeBSD 6.2 ACPI problems Message-ID: <458D80BE.7010403@root.org> In-Reply-To: <499c70c0612220829u20459ca1r6233426886e52968@mail.gmail.com> References: <499c70c0612220653r113d90bm4fc860d85e16a305@mail.gmail.com> <200612221802.33439.argentoff@rtelekom.ru> <499c70c0612220829u20459ca1r6233426886e52968@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Abdullah Al-Marrie wrote: > On 12/22/06, Paul Argentoff <argentoff@rtelekom.ru> wrote: >> On Friday 22 December 2006 17:53, Abdullah Al-Marrie wrote: >> >> > Solved, and posted a HOWTO in my Blog, so other users with this wlan >> > chip would be able to use ndisgen. >> >> Did you say 6.2 _booted_ on your BIOS? What bios release? 2.60? > > Yes, but don't update to 2.60 now, I'm downgrading right away to 2.40 > > Here what happens when I close the lid, or choose to reboot. > > > acpi_lid0: wake_prep disabled wake for \_SB_.LID_ (S5) > unknown: wake_prep disabled wake for \_SB_.PCI0.PB3_ (S5) > pcib2: wake_prep disabled wake for \_SB_.PCI0.PB4_ (S5) > pcib3: wake_prep disabled wake for \_SB_.PCI0.PB5_ (S5) > uknown: wake_prep disabled wake for \_SB_.PCI0.PB6_ (S5) > uknown: wake_prep disabled wake for \_SB_.PCI0.PB7_ (S5) > pcib2: wake_prep disabled wake for \_SB_.PCI0.BB4_ (S5) > pcib3: wake_prep disabled wake for \_SB_.PCI0.BB5_ (S5) > ochi0: wake_prep disabled wake for \_SB_.PCI0.OHC1_ (S5) > ochi1: wake_prep disabled wake for \_SB_.PCI0.OHC2_ (S5) > uknown: wake_prep disabled wake for \_SB_.PCI0.EHCI (S5) > uknown: wake_prep disabled wake for \_SB_.PCI0.HDA_ (S5) > atkbdc0: wake_prep disabled wake for \_SB_.PCI0.LPC0.KBC0_ (S5) > rl0: wake_prep disabled wake for \_SB_.PCI0.P2P_.ELAN (S5) > uknown: wake_prep disabled wake for \_SB_.PCI0.AUDO (S5) > uknown: wake_prep disabled wake for \_SB_.PCI0.MODM (S5) > > The Operating system has halted. > Please press any key to reboot. > That shows a normal "halt" sequence. If it halts when you close the lid, then check your hw.acpi.lid_switch_state sysctl. It should not be S5 (power off). Just set it to NONE. All this is in the acpi man page. -- Nate
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?458D80BE.7010403>