Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 30 Apr 1998 19:36:12 +0800
From:      Doug Lo <jwlo@ms11.hinet.net>
To:        "Ozz!!!" <osa@unibest.ru>
Cc:        freebsd-questions@FreeBSD.ORG
Subject:   Re: Weird ppp problem.
Message-ID:  <3548622B.D0621976@ms11.hinet.net>
References:  <Pine.BSF.3.96.980430125651.2447C-100000@hole.etrust.ru>

next in thread | previous in thread | raw e-mail | index | archive | help
Ozz,

First, thanks for the tips. As I mentioned, I can use PAP to dialup with ijjpp
without any problem.
But I can't use to dialup another ISP which they don't provide PAP and CHAP.
So would you tell me how to do without PAP and CHAP.

Thanks in advance,
Doug.


Ozz!!! wrote:

> On Wed, 29 Apr 1998, Doug Lo wrote:
>
> > Hi, FreeBSDers,
> >
> > I edited /etc/ppp/ppp.conf and /etc/ppp/ppp.linkup two files, and ppp works fine
> > with PAP authentication :-)
> > I have another ISP dialup number without PAP and CHAP,  so I also edit ppp.conf
> > and ppp.linkup, but
> > ppp did't work with it. I don't know how to solve this problem, if anyone know
> > how to solve it, please let me know,
> > thanks in advance.
> >
> > P.S. I'm using Dynamic IP and my os version is 2.2.6-RELEASE.
> >
> > The ppp.conf is below:
> > default:
> >  set log Phase Chat Connect Carrier LCP IPCP CCP tun command
> >  set device /dev/cuaa1
> >  set speed 115200
> >  deny lqr
> >  set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT OK-AT-OK ATE1Q0 OK \\
> >
> > dATDT\\T TIMEOUT 40 CONNECT"
> >
> > isp:
> >  set openmode active
> >  set phone 3325318
> >  set login "name: xxxxx:password:xxxxx:No : 2"
> >  set ifaddr 10.1.1.1/0 10.2.2.2/0
> >  dial
> >
> > The ppp.linkup is:
> > isp:
> >    delete ALL
> >    add 0 0 HISADDR
> >
> > The ppp.log file is:
> > [ snip ]
> > Apr 29 21:20:09 Jupiter ppp[218]: tun0: LCP:  ACFCOMP[2]
> > Apr 29 21:20:09 Jupiter ppp[218]: tun0: LCP:  PROTOCOMP[2]
> > Apr 29 21:20:09 Jupiter ppp[218]: tun0: LCP:  ACCMAP[6] 0x00000000
> > Apr 29 21:20:09 Jupiter ppp[218]: tun0: LCP:  MRU[4] 1500
> > Apr 29 21:20:09 Jupiter ppp[218]: tun0: LCP:  MAGICNUM[6] 0x681f8874
> > Apr 29 21:20:12 Jupiter ppp[218]: tun0: LCP: State change Req-Sent --> Stopped
> > Apr 29 21:20:12 Jupiter ppp[218]: tun0: LCP: LcpLayerFinish
> > Apr 29 21:20:14 Jupiter ppp[218]: tun0: Phase: Modem: Connect time: 35 secs: 253
> >
> >  octets in, 267 octets out
> > Apr 29 21:20:14 Jupiter ppp[218]: tun0: Phase:  total 14 bytes/sec
> > Apr 29 21:20:14 Jupiter ppp[218]: tun0: Phase: NewPhase: Dead
> > Apr 29 21:20:14 Jupiter ppp[218]: tun0: Phase: Disconnected!
> > Apr 29 21:20:14 Jupiter ppp[218]: tun0: LCP: LcpLayerFinish
> > Apr 29 21:20:14 Jupiter ppp[218]: tun0: Phase: NewPhase: Dead
> > Apr 29 21:21:05 Jupiter ppp[218]: tun0: Command: quit
> > Apr 29 21:21:06 Jupiter ppp[218]: tun0: Phase: PPP Terminated (normal).
> >
> > The command I run ppp isp, it appears:
> > ppp cyut
> > Working in interactive mode
> > Using interface: tun0
> > Dial attempt 1 of 1
> > Phone: 3325318
> > dial OK!
> > login OK!
> > ppp ON Jupiter> Packet mode.
> > ppp ON Jupiter>                             ==> Then it automatically quit.
> >
> > Best regards,
> > Doug.
> >
>
> About PPP...
> I use pppd for pap.
> I have a following files:
>
> /etc/ppp/options         - file with options for modem
> /etc/ppp/pap-secrets     - file with login & password for my ISP
> /etc/ppp/peers/isp       - chat-file for modem
> /etc/ppp/chat-isp        _ chat-file for dialin
>
> /etc/ppp/options is following:
> asyncmap 0
> crtscts
> debug
> lock
> modem
> auth
> user <my_login>
> defaultroute
> netmask 255.255.255.0
>
> /etc/ppp/peers/isp is following:
> ttyd1 38400 crtscts
> connect '/usr/bin/chat -v -f/etc/ppp/chat-isp'
> noauth
>
> /etc/ppp/pap-secrets is following:
> <my_login>      *       <my_password>
>
> /etc/ppp/chat-isp
> "" atz0
> OK atdt<phone_number_of_my_ISP>
> CONNECT \r
>
> In command prompt pppd starting :
> # pppd call isp
>
> All works fine.
>
> Rgdz,
> oZZ,
> osa@unibest.ru
>
> P.S. I use FreeBSD-CURRENT wiz pppd-2.3.3




To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3548622B.D0621976>