Date: Mon, 29 Apr 2019 19:57:50 +0200 From: Emmanuel Vadot <manu@bidouilliste.com> To: Ian Lepore <ian@freebsd.org> Cc: Mori Hiroki <yamori813@yahoo.co.jp>, "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> Subject: Re: spigen problem Message-ID: <20190429195750.409e9d13aea2ff1654a20d3c@bidouilliste.com> In-Reply-To: <22b68b094cbe7ab1b07673e43f6473906bd2d648.camel@freebsd.org> References: <1991993923.530828.1556558314174.JavaMail.yahoo.ref@jws704008.mail.kks.yahoo.co.jp> <1991993923.530828.1556558314174.JavaMail.yahoo@jws704008.mail.kks.yahoo.co.jp> <22b68b094cbe7ab1b07673e43f6473906bd2d648.camel@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 29 Apr 2019 11:34:34 -0600 Ian Lepore <ian@freebsd.org> wrote: > On Tue, 2019-04-30 at 02:18 +0900, Mori Hiroki wrote: > > Hi > > > > I add small spi lcd on RT3050. This lcd controller is S6D0151. > > > > S6D0151 transfer is tree byte command then tree byte data. > > > > I use spigen mruby rapper. This rapper use SPIGENIOC_TRANSFER. > > > > I try to send tree byte command. But spi transfer is six byte. > > > > This is reason. > > > > sys/dev/spibus/spigen.c > > > > error = copyin(st->st_command.iov_base, transfer.tx_cmd, > > transfer.tx_cmd_sz = transfer.rx_cmd_sz = st- > > >st_command.iov_len); > > > > > > This lcd not work six byte transfer. > > > > How do I fix this ? > > > > Regards > > > > Hiroki Mori > > > > I'm not sure what you mean by "This is the reason", that code sets up > the transfer for exactly as many bytes as you requested in > st_command.iov_len. If you set that to three bytes, only three bytes > will be transfered. > > -- Ian I guess that Mori-San wants to transfer 3 bytes but receive 6, if it's that you need to set tx_cmd_sz with dummy bytes count too. The tx buffer will also need to contain the dummy bytes values. -- Emmanuel Vadot <manu@bidouilliste.com> <manu@freebsd.org>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20190429195750.409e9d13aea2ff1654a20d3c>