Date: Wed, 31 May 2000 18:27:11 -0600 (MDT) From: Eduardo Viruena Silva <mrspock@esfm.ipn.mx> To: freebsd-questions@freebsd.org Message-ID: <Pine.BSF.4.21.0005311813080.236-300000@Michelle.esfm.ipn.mx>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Hello FreeBSD gurus!
I have a Pentium III/450 and a Intel 440 motherboard in my house.
and I have a FreeBSD 4.0 box on a Cyrix 6x86/166 in my office
[an old computer].
I have also a IOmega Zip drive. Both machines have EPP parallel ports.
I compiled my kernel with the "scbus", "da" and "vpo" devices
and it worked perfectly at home. I took the hard disk to my
office and my IOmega did not work. My keyboard got frozen...
I get the following messages when I try to mount the IOmega disk:
da0: reading primary partition table: error fsbn 0
vpo0: vpo0 error/timeout (3)
(da:vp0:0:6:0): Syncronize cache failed, status==0xb, scsi status= 0x0
vpo0: vpo0 error/timeout (3)
Do you have any idea of what is happening?
I'm attaching my kernel configuration and the system messages that I get
when I boot my computer.
Thank you in advance.
- ______ _
* / /###\ / \ __
/\ /\ * / ./#### \ * \__|_/ | |
/ \/ \ | b#####| * _ | __ | | __
= .. \____ \ \_\#####/ / \| / \ | | /\_\/
= \_| * \___\###/ * \_/\_/\__/\__\/_/\__/
= \______/ _
| |
[-- Attachment #2 --]
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-RELEASE #7: Tue May 30 19:33:22 MDT 2000
root@Michelle.esfm.ipn.mx:/usr/src/sys/compile/eviruena
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 199739529 Hz
CPU: Cyrix 6x86MX (199.74-MHz 686-class CPU)
Origin = "CyrixInstead" Id = 0x600 Stepping = 0 DIR=0x0853
Features=0x80a135<FPU,DE,TSC,MSR,CX8,PGE,CMOV,MMX>
real memory = 33542144 (32756K bytes)
config> q
avail memory = 29388800 (28700K bytes)
Preloaded elf kernel "kernel" at 0xc0330000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc033009c.
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0
pci0: <Trident model 9660 VGA-compatible display device> at 11.0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
vpo0: <Iomega VPI0 Parallel to SCSI interface> on ppbus0
vpo0: EPP 1.9 mode
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
ep0: <3Com 3C509-Combo EtherLink III> at port 0x300-0x30f irq 10 on isa0
ep0: Ethernet address 00:20:af:e8:ab:27
ep0: supplying EUI64: 00:20:af:ff:fe:e8:ab:27
sbc0: <Creative ViBRA16C> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0
sbc0: setting card to irq 5, drq 1, 5
pcm0: <SB DSP 4.13> on sbc0
unknown0: <Game> at port 0x200-0x207 on isa0
ad0: 2445MB <QUANTUM FIREBALL EL2.5A> [5300/15/63] at ata0-master using UDMA33
acd0: CDROM <CREATIVE CD3231E> at ata1-master using PIO4
da0 at vpo0 bus 0 target 6 lun 0
da0: <IOMEGA ZIP 100 J.03> Removable Direct Access SCSI-2 device
da0: 96MB (196608 512 byte sectors: 64H 32S/T 96C)
Mounting root from ufs:/dev/ad0s2a
ep0: starting DAD for fe80:0002::0220:afff:fee8:ab27
ep0: DAD complete for fe80:0002::0220:afff:fee8:ab27 - no duplicates found
sio0: 1 more silo overflow (total 1)
[-- Attachment #3 --]
machine i386
cpu I386_CPU
cpu I486_CPU
cpu I586_CPU
cpu I686_CPU
ident EViruena
maxusers 32
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options MFS #Memory Filesystem
options MD_ROOT #MD is a potential root device
options NFS #Network Filesystem
options NFS_ROOT #NFS usable as root device, NFS required
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root, CD9660 required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extentions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
device isa
device eisa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
# ATA and ATAPI devices
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
#options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices
# SCSI peripherals
device scbus # SCSI bus (required)
device da # Direct Access (disks)
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa?
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device sio2 at isa? disable port IO_COM3 irq 5
device sio3 at isa? disable port IO_COM4 irq 9
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
device vpo # Requires scbus and da
# ISA Ethernet NICs.
device ep
# Pseudo devices - the number indicates how many units to allocated.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device sl 1 # Kernel SLIP
pseudo-device ppp 1 # Kernel PPP
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
pseudo-device gif 4 # IPv6 and IPv4 tunneling
pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf #Berkeley packet filter
device pcm
device sbc
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0005311813080.236-300000>