Date: Mon, 11 Dec 2000 14:12:36 -0500 (EST) From: David Miller <dmiller@sparks.net> To: Reverend K Kanno <presence@churchofinformationwarfare.org> Cc: freebsd-scsi@freebsd.org Subject: Re: LUN 1 on 3.2-R? Message-ID: <Pine.BSF.4.21.0012111412000.8976-100000@search.sparks.net> In-Reply-To: <Pine.NEB.3.96.1001211125722.44019C-100000@shell-1.enteract.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 11 Dec 2000, Reverend K Kanno wrote: > On Mon, 11 Dec 2000, David Miller wrote: > > What SCSI HA are you using? It seems lots of HAs dont' properly support LUNs. Adaptec 2940. --- David > For instance, I have yet to see an onboard Adaptec Dell SCSI HA that works > with an Infortrend or Chapparal controller. > > > Hi All:) > > > > I'm stumped. I have a 3.2R system with an attached external SCSI-SCSI > > RAID controller. I had a nice 10 drive array last year with 36 GB drives, > > and this year I'm adding on another nice array. > > > > I have this in my config file: > > > > # SCSI peripherals > > # Only one of each of these is needed, they are dynamically allocated. > > controller scbus0 # SCSI bus (required) > > # device da0 # Direct Access (disks) > > disk da0 at scbus0 target 2 unit 0 > > disk da1 at scbus0 target 2 unit 1 > > device sa0 # Sequential Access (tape etc) > > device cd0 # CD > > device pass0 # Passthrough device (direct SCSI) > > > > > > But in dmesg I get: > > > > Waiting 5 seconds for SCSI devices to settle > > pass1 at ahc0 bus 0 target 2 lun 1 > > pass1: <CHAPTEC G5312 G2.2> Fixed Processor SCSI-2 device > > pass1: 80.000MB/s transfers (40.000MHz, offset 127, 16bit), Tagged > > Queueing Enabled > > pass2 at ahc0 bus 0 target 2 lun 2 > > pass2: <JMR ELEC FORTRA SERIES. 1.00> Fixed Processor SCSI-2 device > > pass2: 80.000MB/s transfers (40.000MHz, offset 127, 16bit) > > da0 at ahc0 bus 0 target 2 lun 0 > > da0: <CHAPTEC G5312 G2.2> Fixed Direct Access SCSI-2 device > > da0: 80.000MB/s transfers (40.000MHz, offset 127, 16bit), Tagged Queueing > > Enabled > > da0: 279097MB (571591680 512 byte sectors: 255H 63S/T 35579C) > > changing root device to wd0s1a > > > > > > camcontrol devlist: > > > > su-2.03# camcontrol devlist > > <CHAPTEC G5312 G2.2> at scbus0 target 2 lun 0 (pass0,da0) > > <CHAPTEC G5312 G2.2> at scbus0 target 2 lun 1 (pass1) > > <JMR ELEC FORTRA SERIES. 1.00> at scbus0 target 2 lun 2 (pass2) > > > > > > The associated da* and pass* devices seem to exist. > > > > What am I missing? > > > > Thanks in advance, > > > > --- David > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-scsi" in the body of the message > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-scsi" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0012111412000.8976-100000>