Date: Sat, 2 Oct 1999 16:36:44 -0700 (PDT) From: Matthew Jacob <mjacob@feral.com> To: freebsd-current@freebsd.org Subject: broken SMPs, etc... Message-ID: <Pine.BSF.4.10.9910021634260.53371-100000@beppo.feral.com>
next in thread | raw e-mail | index | archive | help
I have a very wierd case of a Dual PPRo SuperMicro board (two PCI
busses) and when running -stable, I/O through boards on the second PCI bus
is *really* delayed.
Any notion on this? -verbose boot stuff below...
-matt
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.3-STABLE #1: Sat Oct 2 05:28:15 PDT 1999
mjacob@noworp.feral.com:/usr/src/sys/compile/NOWORP
Calibrating clock(s) ... TSC clock: 199459743 Hz, i8254 clock: 1193349 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium Pro (686-class CPU)
Origin = "GenuineIntel" Id = 0x619 Stepping = 9
Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV>
real memory = 352321536 (344064K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00346000 - 0x14ff5fff, 348848128 bytes (85168 pages)
avail memory = 339275776 (331324K bytes)
Programming 24 pins in IOAPIC #0
SMP: CPU0 apic_initialize():
lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Found BIOS32 Service Directory header at 0xc00fdb70
Entry = 0xfdb80 (0xc00fdb80) Rev = 0 Len = 1
PCI BIOS entry at 0xdba1
Other BIOS signatures found:
ACPI: 00000000
$PnP: 000f5b50
Preloaded elf kernel "kernel" at 0xc032a000.
Pentium Pro MTRR support enabled
SMP: CPU0 bsp_apic_configure():
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000010 SVR: 0x000001ff
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=12378086)
Probing for devices on PCI bus 0:
found-> vendor=0x8086, dev=0x1237, revid=0x02
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
chip0: <Intel 82440FX (Natoma) PCI and memory controller> rev 0x02 on pci0.0.0
found-> vendor=0x8086, dev=0x7000, revid=0x01
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0
I/O Recovery Timing: 8-bit 1 clocks, 16-bit 1 clocks
Extended BIOS: disabled
Lower BIOS: enabled
Coprocessor IRQ13: enabled
Mouse IRQ12: enabled
Interrupt Routing: A: IRQ11, B: disabled, C: IRQ9, D: IRQ10
MB0: IRQ15, MB1:
found-> vendor=0x8086, dev=0x7010, revid=0x00
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[0]: type 4, range 32, base 0000ffa0, size 4
ide_pci0: <Intel PIIX3 Bus-master IDE controller> rev 0x00 on pci0.7.1
intel_piix_status: primary master/slave sample = 5, master/slave recovery = 4
intel_piix_status: primary master fastDMAonly disabled, pre/post disabled,
intel_piix_status: IORDY sampling disabled,
intel_piix_status: fast PIO disabled
intel_piix_status: primary master/slave sample = 5, master/slave recovery = 4
intel_piix_status: primary slave fastDMAonly disabled, pre/post disabled,
intel_piix_status: IORDY sampling disabled,
intel_piix_status: fast PIO disabled
ide_pci: busmaster 0 status: 04 from port: 0000ffa2
intel_piix_status: secondary master/slave sample = 5, master/slave recovery = 4
intel_piix_status: secondary master fastDMAonly disabled, pre/post disabled,
intel_piix_status: IORDY sampling disabled,
intel_piix_status: fast PIO disabled
intel_piix_status: secondary master/slave sample = 5, master/slave recovery = 4
intel_piix_status: secondary slave fastDMAonly disabled, pre/post disabled,
intel_piix_status: IORDY sampling disabled,
intel_piix_status: fast PIO disabled
ide_pci: busmaster 1 status: 04 from port: 0000ffaa
Freeing (NOT implemented) redirected PCI irq 11.
found-> vendor=0x5333, dev=0x8811, revid=0x54
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=16
map[0]: type 1, range 32, base 80000000, size 26
vga0: <S3 Trio graphics accelerator> rev 0x54 int a irq 16 on pci0.16.0
Freeing (NOT implemented) redirected PCI irq 9.
found-> vendor=0x8086, dev=0x1229, revid=0x02
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=18
map[0]: type 3, range 32, base ffafe000, size 12
map[1]: type 4, range 32, base 0000ef80, size 5
map[2]: type 1, range 32, base feb00000, size 20
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x02 int a irq 18 on pci0.19.0
fxp0: Ethernet address 00:a0:c9:aa:16:d6
bpf: fxp0 attached
found-> vendor=0x8086, dev=0x0960, revid=0x01
class=06-04-00, hdrtype=0x01, mfdev=1
subordinatebus=1 secondarybus=1
chip2: <PCI to PCI bridge (vendor=8086 device=0960)> rev 0x01 on pci0.20.0
Freeing (NOT implemented) redirected PCI irq 10.
found-> vendor=0x8086, dev=0x1960, revid=0x01
class=05-80-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=19
map[0]: type 3, range 32, base ffaff000, size 12
Probing for devices on PCI bus 1:
Freeing (NOT implemented) redirected PCI irq 11.
found-> vendor=0x1077, dev=0x1020, revid=0x03
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=16
map[0]: type 4, range 32, base 0000dc00, size 8
map[1]: type 1, range 32, base f66ff000, size 12
Qlogic ISP Driver, FreeBSD CAM Version 0.992, Core Version 1.10
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> rev 0x03 int a irq 16 on pci1.1.0
isp0: using Memory space register mapping
isp0: set PCI line size to 16
isp0: Board Revision 1040, loaded F/W Revision 7.65.0
isp0: Last F/W revision was 2.2.0
isp0: 124 max I/O commands supported
Initializing PnP override table
Probing for PnP devices:
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
No Plug-n-Play devices were found
Probing for devices on the ISA bus:
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
vt0 on isa
vt0: unkown s3, 80 col, color, 8 scr, mf2-kbd, [R3.20-b24]
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
psm0 not found
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at 0x2f8-0x2ff irq 3 flags 0x10 on isa
sio1: type 16550A
wdc0 not found at 0x1f0
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3b0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0x0 size:0k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 09 60 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 07 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 09 60 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 07 08 00 00 00 00 00 10 0e 00 ff
npx0 on motherboard
npx0: INT 16 interface
imasks: bio c8000040, tty c300001a, net c6040000
SMP: enabled INTs: 1, 3, 4, 6, 16, 18, apic_imen: 0x00faffa5
BIOS Geometries:
0:0209fe3f 0..521=522 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IO APIC int pin 2
APIC_IO: routing 8254 via 8259 on pin 0
bpf: lo0 attached
ccd0-3: Concatenated disk drivers
Waiting 4 seconds for SCSI devices to settle
isp0: driver initiated bus reset of bus 0
SMP: AP CPU #1 Launched!
SMP: CPU1 apic_initialize():
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
isp0: 0.4 get user period 0xc offset 0x8 flags 0xfc00
isp0: 0.4 get current period 0x19 offset 0x0 flags 0xc5c0
isp0: 0.4 set current period 0xc offset 0x8 flags 0xfc00
pass0 at isp0 bus 0 target 4 lun 0
pass0: <SEAGATE ST15230W 0638> Fixed Direct Access SCSI-2 device
pass0: Serial Number 00448359
isp0: 0.4 get current period 0x19 offset 0x8 flags 0xfc00
pass0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0 at isp0 bus 0 target 4 lun 0
da0: <SEAGATE ST15230W 0638> Fixed Direct Access SCSI-2 device
da0: Serial Number 00448359
isp0: 0.4 get current period 0x19 offset 0x8 flags 0xfc00
da0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 4095MB (8386733 512 byte sectors: 255H 63S/T 522C)
Considering FFS root f/s.
changing root device to da0s1a
da0s1: type 0xa5, start 63, end = 3984119, size 3984057 : OK
da0s2: type 0x83, start 3984120, end = 8385929, size 4401810 : OK
WARNING: / was not properly dismounted
start_init: trying /sbin/init
Start pid=2 <pagedaemon>
Start pid=3 <vmdaemon>
Start pid=4 <syncer>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.9910021634260.53371-100000>