Date: Tue, 13 Sep 2005 13:57:02 -0400 From: Kris Kennaway <kris@obsecurity.org> To: theblues gnr <thebluesgnr@hotmail.com> Cc: freebsd-amd64@freebsd.org Subject: Re: Compiling modules statically Message-ID: <20050913175702.GA32612@xor.obsecurity.org> In-Reply-To: <BAY20-F20E1308BD8BE542613BAF8A09C0@phx.gbl> References: <20050912222748.GA12943@xor.obsecurity.org> <BAY20-F20E1308BD8BE542613BAF8A09C0@phx.gbl>
next in thread | previous in thread | raw e-mail | index | archive | help
--EVF5PPMfhYS0aIcm Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Tue, Sep 13, 2005 at 02:44:40PM -0300, theblues gnr wrote: > > > >Edit the kernel configuration file and add the appropriate entry (cf > >GENERIC or NOTES). This is surely described in the handbook. > > > >Kris >=20 > I built my own kernel, and I made sure to include the options: >=20 > device miibus # MII bus support > device vge # VIA VT612x gigabit ethernet >=20 > I built twice, using each method (I named them FBSD001 and FBSD002). In= =20 > both cases the custom kernel was installed, but still I got the panic whe= n=20 > booting with the onboard VIA Velocity enabled. >=20 > I also tried loading the kernel from the boot prompt, with the following= =20 > options: >=20 > unload (to unload all modules) > disable-module if_vge > boot >=20 > And still the same kernel panic. :( >=20 > Thanks everyone for the help so far. Sounds like the advice was incorrect then. Did you obtain a dump from the panic (see the developers' handbook chapter on kernel debugging)? Kris --EVF5PPMfhYS0aIcm Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (FreeBSD) iD8DBQFDJxLuWry0BWjoQKURAseCAKD12+kC2A5Rmckh/jybgVtfDqAoDACeMMHp OLmhNrmrygjLdNdvRMYXRmU= =Eke0 -----END PGP SIGNATURE----- --EVF5PPMfhYS0aIcm--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050913175702.GA32612>