Date: Mon, 26 Jun 1995 01:01:14 +0100 From: "Jordan K. Hubbard" <jkh@freebsd.org> To: hackers@freebsd.org Subject: Well, I'm stumped.. [ij-ppp] Message-ID: <199506260001.BAA13537@whisker.internet-eireann.ie>
next in thread | raw e-mail | index | archive | help
Tonite, after adding a whole batch of afilters and dfilters (as per suggestion) I went back to auto mode and went out to dinner after reading my mail. Here's what I found in my ppp log when I came back: 06-25 19:52:07 [12692] CCP: LayerFinish. 06-25 19:52:07 [12692] CCP: state change Req-Sent --> Stopped 06-26 00:08:44 [12692] Idle timer expired. 06-26 00:08:44 [12692] LCP: LayerDown 06-26 00:08:44 [12692] OsLinkdown: 194.9.34.254 06-26 00:08:44 [12692] Phase: Terminate As you can see, the silly thing stayed up for *4 hours* before finally going down! I have the following in my /etc/ppp/ppp.conf file: default: set device /dev/cuaa3 set speed 38400 disable lqr deny lqr set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" ATE1Q0M1 OK-AT-OK \\dATD T\\T TIMEOUT 40 CONNECT" set afilter 0 deny icmp set afilter 1 deny udp src eq 53 set afilter 2 deny udp dst eq 53 set afilter 3 deny udp src eq 520 set afilter 4 deny udp dst eq 520 set afilter 5 deny udp src eq 123 set afilter 6 deny udp dst eq 123 set afilter 7 permit 0/0 0/0 # # Don't dial with ICMP, DNS, RIP, NTP packet # set dfilter 0 deny icmp set dfilter 1 deny udp src eq 53 set dfilter 2 deny udp dst eq 53 # include DNS zone transfer request via TCP set dfilter 3 deny tcp src eq 53 set dfilter 4 deny tcp dst eq 53 set dfilter 5 deny udp src eq 520 set dfilter 6 deny udp dst eq 520 set dfilter 7 deny udp src eq 123 set dfilter 8 deny udp dst eq 123 set dfilter 9 permit 0/0 0/0 set timeout 60 eireann: <entries specific to my service provider> Heck, even if the timeout wasn't parsed somehow in the default rule you'd still think that the default timeout of 360 would have been applied! Instead, it stayed up for 240 minutes and wasted a significant amount of phone charges. Needless to say, I'm going back to non-auto mode, but I really think that there's a problem here at this point and that it's not just me. Any suggestions? Jordan
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199506260001.BAA13537>