Date: Sat, 17 Dec 2022 14:35:47 +0000 From: bugzilla-noreply@freebsd.org To: x11@FreeBSD.org Subject: [Bug 268394] graphics/drm-510-kmod: AMD Ryzen 7950X's integrated GPU not supported (Raphael) Message-ID: <bug-268394-7141-VRQ305JK5F@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-268394-7141@https.bugs.freebsd.org/bugzilla/> References: <bug-268394-7141@https.bugs.freebsd.org/bugzilla/>
next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D268394 --- Comment #2 from Jonathan Vasquez <jon@xyinn.org> --- Hey Emmanuel, I tested the APU just now on Fedora 37 and it works perfectly fine (even on Wayland). I've attached the linux lspci, dmesg, and uname info, and also two screenshots of GNOME fully running on it. We can see the following information from the lspci output for the gpu components (first is the dedicated 6900 XT card, second is the integrated raphael gpu): 03:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] N= avi 21 [Radeon RX 6900 XT] (rev c0) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 04fe Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort+ <T= Abort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 169 IOMMU group: 15 Region 0: Memory at f800000000 (64-bit, prefetchable) [size=3D16G] Region 2: Memory at fc00000000 (64-bit, prefetchable) [size=3D256M] Region 4: I/O ports at f000 [size=3D256] Region 5: Memory at fca00000 (32-bit, non-prefetchable) [size=3D1M] Expansion ROM at fcb00000 [disabled] [size=3D128K] Capabilities: <access denied> Kernel driver in use: amdgpu Kernel modules: amdgpu 13:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Raphael (rev c1) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 8877 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort+ <T= Abort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 76 IOMMU group: 25 Region 0: Memory at fc20000000 (64-bit, prefetchable) [size=3D256M] Region 2: Memory at fc30000000 (64-bit, prefetchable) [size=3D2M] Region 4: I/O ports at d000 [size=3D256] Region 5: Memory at fc900000 (32-bit, non-prefetchable) [size=3D512= K] Capabilities: <access denied> Kernel driver in use: amdgpu Kernel modules: amdgpu I've also attached a crash dump that only occurs if I try to start sddm whi= le the HDMI cable is connected and outputting to the motherboard's HDMI slot (= the raphael gpu), if I switch the HDMI cable to the dedicated card, it doesn't crash. I'm guessing this is because it's not supported yet so it may expect= ed behavior in this current state. --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-268394-7141-VRQ305JK5F>