Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 28 Dec 2001 05:37:16 -0600
From:      "Mario Doria" <madd@tecdigital.net>
To:        <stable@freebsd.org>
Subject:   Re: 4.4-STABLE crashes - suspects new ata-driver over wd-drivers
Message-ID:  <001001c18f94$00dc1680$0a00a8c0@gandalf>

next in thread | raw e-mail | index | archive | help
>Maybe I should toss in that I've had spontaneous reboots during heavy
>IDE activity both on my desktop (VIA 82C686) and my laptop (Intel
>82443BX).  And before that, random disk corruption during heavy SCSI
>activity on my old desktop machine (seen with Tekram and Acer
>83C575-based host adapters and a borrowed Adaptec 2940).

I've had similar problems, while trying to go from 4.4-STABLE to 5.0-CURRENT
a month ago, the machine couldn't finish building world, it would panic and
reboot. At the third attempt, it did finish building world. Also, I tried to
get it back to 4.4-STABLE (thinking it was a bug with 5.0, but also while
building world for 4.4-STABLE, it crashed again). After these attempts, I
reinstalled the machine from CD and afterwards it only had a very light
load.

Right now it's working with 4.5-PRERELEASE with no problems.

This week I've been doing buildworld cycles over and over again, with
make -16 buildworld and on another terminal portsdb -Uu. No crashes
whatsoever :)


Here's my dmesg output:

Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.5-PRERELEASE #0: Thu Dec 27 20:22:31 CST 2001
    root@frankie.localdomain:/usr/src/sys/compile/FRANKIE
Timecounter "i8254"  frequency 1193182 Hz
CPU: AMD Duron(tm)  (900.04-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x631  Stepping = 1

Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PA
T,PSE36,MMX,FXSR>
  AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory  = 125763584 (122816K bytes)
avail memory = 117374976 (114624K bytes)
Preloaded elf kernel "kernel" at 0xc03b6000.
netsmb_dev: loaded
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 6 entries at 0xc00f8600
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1106 device=b112)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Trident model 8500 VGA-compatible display device> at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xff00-0xff0f at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 12 at device 7.2
on pc
i0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 12 at device 7.3
on pc
i0
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 12 at device 7.3
on pc
i0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
chip1: <VIA 82C686 ACPI interface> at device 7.4 on pci0
pcm0: <VIA VT82C686A> port 0xd400-0xd403,0xd800-0xd803,0xdc00-0xdcff irq 10
at d
evice 7.5 on pci0



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001001c18f94$00dc1680$0a00a8c0>