From owner-cvs-sys  Tue May 21 11:39:02 1996
Return-Path: owner-cvs-sys
Received: (from root@localhost)
          by freefall.freebsd.org (8.7.3/8.7.3) id LAA16271
          for cvs-sys-outgoing; Tue, 21 May 1996 11:39:02 -0700 (PDT)
Received: (from gibbs@localhost)
          by freefall.freebsd.org (8.7.3/8.7.3) id LAA16238;
          Tue, 21 May 1996 11:38:46 -0700 (PDT)
Date: Tue, 21 May 1996 11:38:46 -0700 (PDT)
From: "Justin T. Gibbs" <gibbs>
Message-Id: <199605211838.LAA16238@freefall.freebsd.org>
To: CVS-committers, cvs-all, cvs-sys
Subject: cvs commit:  src/sys/dev/aic7xxx aic7xxx.seq aic7xxx_reg.h src/sys/i386/scsi aic7xxx.c src/sys/pci aic7870.c
Sender: owner-cvs-sys@FreeBSD.ORG
X-Loop: FreeBSD.org
Precedence: bulk

gibbs       96/05/21 11:38:44

  Modified:    sys/dev/aic7xxx  aic7xxx.seq aic7xxx_reg.h
  Log:
  Enable/Disable Ultra mode on a per target basis.  This allows the driver
  to use the full range of settings from 3.6-20MHz on any target.
  
  Revision  Changes    Path
  1.35      +18 -2     src/sys/dev/aic7xxx/aic7xxx.seq
  1.11      +3 -1      src/sys/dev/aic7xxx/aic7xxx_reg.h

  Modified:    sys/i386/scsi  aic7xxx.c
  Log:
  Enable/Disable Ultra mode on a per target basis.  This allows the driver
  to use the full range of settings from 3.6-20MHz on any target.
  
  Remove all Ultra settings except for the top three that are documented
  to work.  This fixes some problem reports with the last revision of the
  driver since at least the 5.7MHz entry doesn't work in Ultra mode.
  
  Revision  Changes    Path
  1.67      +60 -45    src/sys/i386/scsi/aic7xxx.c

  Modified:    sys/pci   aic7870.c
  Log:
  It seems that the aic78X0 chips will either have their scratch ram
  as all 0s or all 1s after POST if there is no BIOS installed.
  
  Revision  Changes    Path
  1.34      +12 -1     src/sys/pci/aic7870.c