Date: Fri, 6 Dec 2002 16:17:24 +0100 From: Gerrit =?iso-8859-1?Q?K=FChn?= <gerrit@pmp.uni-hannover.de> To: freebsd-smp@freebsd.org Subject: USB on a MSI 694DPro-AIR with DP2 Message-ID: <20021206151723.GA3905@pmp.uni-hannover.de> In-Reply-To: <20021127172548.GF27502@pmp.uni-hannover.de> References: <20021127172548.GF27502@pmp.uni-hannover.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Nov 27, 2002 at 06:25:48PM +0100, Gerrit Kühn wrote:
> BTW: apart from the things mentioned abvove, DP2 seems to be stable
> running on my server at home for 18h now.
I've got no response on my first mail so far, but I can add that the
system is still running stable up to now.
However, meanwhile I noticed that the USB-ports don't work. They're
detected, but when I switch on a device connected to them, I get
something like:
uhub0: device problem, disabling port 1
When turning the device off again, I get:
uhub0: port error, restarting port 1
Here is a verbose boot of the DP2-system with a GENERIC kernel with
only SMP turned on additionally. Any help would be greatly appreciated:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-DP2 #1: Mon Nov 25 22:41:52 CET 2002
root@stardust.terra.ger:/usr/obj/usr/src/sys/GENERIC2
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0692000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06920b4.
Calibrating clock(s) ... TSC clock: 935444634 Hz, i8254 clock: 1193169 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium III/Pentium III Xeon/Celeron (935.46-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 1610547200 (1535 MB)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x006bc000 - 0x5ffe7fff, 1603452928 bytes (391468 pages)
avail memory = 1559879680 (1487 MB)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00178011, at 0xfec00000
bios32: Found BIOS32 Service Directory header at 0xc00fae20
bios32: Entry = 0xfb290 (c00fb290) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb2c0
pnpbios: Found PnP BIOS data at 0xc00fbcc0
pnpbios: Entry = f0000:bcf0 Rev = 1.0
Other BIOS signatures found:
Initializing GEOMetry subsystem
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
null: <null device, zero device>
SMP: CPU0 bsp_apic_configure():
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000010 SVR: 0x000001ff
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <VIA694 AWRDACPI> on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06911106)
Using $PIR table, 9 entries at 0xc00fdc40
PCI-Only Interrupts: 5 9 10 11
Location Bus Device Pin Link IRQs
slot 1 0 18 A 0x02 3 4 5 7 9 10 11 12 14 15
slot 1 0 18 B 0x03 3 4 5 7 9 10 11 12 14 15
slot 1 0 18 C 0x05 3 4 5 7 9 10 11 12 14 15
slot 1 0 18 D 0x01 3 4 5 7 9 10 11 12 14 15
slot 2 0 14 A 0x01 3 4 5 7 9 10 11 12 14 15
slot 2 0 14 B 0x02 3 4 5 7 9 10 11 12 14 15
slot 2 0 14 C 0x03 3 4 5 7 9 10 11 12 14 15
slot 2 0 14 D 0x05 3 4 5 7 9 10 11 12 14 15
slot 3 0 15 A 0x02 3 4 5 7 9 10 11 12 14 15
slot 3 0 15 B 0x03 3 4 5 7 9 10 11 12 14 15
slot 3 0 15 C 0x05 3 4 5 7 9 10 11 12 14 15
slot 3 0 15 D 0x01 3 4 5 7 9 10 11 12 14 15
slot 4 0 16 A 0x03 3 4 5 7 9 10 11 12 14 15
slot 4 0 16 B 0x05 3 4 5 7 9 10 11 12 14 15
slot 4 0 16 C 0x01 3 4 5 7 9 10 11 12 14 15
slot 4 0 16 D 0x02 3 4 5 7 9 10 11 12 14 15
slot 5 0 17 A 0x05 3 4 5 7 9 10 11 12 14 15
slot 5 0 17 B 0x01 3 4 5 7 9 10 11 12 14 15
slot 5 0 17 C 0x02 3 4 5 7 9 10 11 12 14 15
slot 5 0 17 D 0x03 3 4 5 7 9 10 11 12 14 15
slot 6 0 12 A 0x03 3 4 5 7 9 10 11 12 14 15
slot 6 0 12 B 0x05 3 4 5 7 9 10 11 12 14 15
slot 6 0 12 C 0x01 3 4 5 7 9 10 11 12 14 15
slot 6 0 12 D 0x02 3 4 5 7 9 10 11 12 14 15
slot 7 0 13 A 0x05 3 4 5 7 9 10 11 12 14 15
slot 7 0 13 B 0x01 3 4 5 7 9 10 11 12 14 15
slot 7 0 13 C 0x02 3 4 5 7 9 10 11 12 14 15
slot 7 0 13 D 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 1 A 0x01 3 4 5 7 9 10 11 12 14 15
embedded 0 1 B 0x02 3 4 5 7 9 10 11 12 14 15
embedded 0 1 C 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 1 D 0x05 3 4 5 7 9 10 11 12 14 15
embedded 0 7 C 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 7 D 0x05 3 4 5 7 9 10 11 12 14 15
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks GOOD min = 1, max = 2, width = 2
ACPI timer looks GOOD min = 1, max = 2, width = 2
ACPI timer looks BAD min = 1, max = 5, width = 5
ACPI timer looks BAD min = 1, max = 5, width = 5
ACPI timer looks BAD min = 1, max = 6, width = 6
ACPI timer looks BAD min = 1, max = 6, width = 6
ACPI timer looks BAD min = 1, max = 5, width = 5
ACPI timer looks BAD min = 1, max = 6, width = 6
ACPI timer looks BAD min = 1, max = 5, width = 5
ACPI timer looks BAD min = 1, max = 6, width = 6
Timecounter "ACPI-safe" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.0
\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.1
\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.2
\\_SB_.PCI0.LNKD irq 9: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.3
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.LNKA irq 5: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.0
\\_SB_.PCI0.LNKB irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.1
\\_SB_.PCI0.LNKC irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.2
\\_SB_.PCI0.LNKD irq 9: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.7.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base d0000000, size 26, enabled
found-> vendor=0x1106, dev=0x0691, revid=0xc4
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x8598, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x0686, revid=0x40
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000a000, size 4, enabled
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=7, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
IOAPIC #0 intpin 19 -> irq 2
Freeing (NOT implemented) redirected PCI irq 9.
map[20]: type 4, range 32, base 0000a400, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x16
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=2
powerspec 2 supports D0 D3 current D0
Freeing (NOT implemented) redirected PCI irq 9.
map[20]: type 4, range 32, base 0000a800, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x16
bus=0, slot=7, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=2
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x3057, revid=0x40
bus=0, slot=7, func=4
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
IOAPIC #0 intpin 18 -> irq 5
Freeing (NOT implemented) redirected PCI irq 10.
map[10]: type 4, range 32, base 0000ac00, size 8, enabled
map[14]: type 4, range 32, base 0000b000, size 2, enabled
map[18]: type 4, range 32, base 0000b400, size 2, enabled
found-> vendor=0x1106, dev=0x3058, revid=0x50
bus=0, slot=7, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
powerspec 2 supports D0 D3 current D0
Freeing (NOT implemented) redirected PCI irq 10.
map[10]: type 4, range 32, base 0000b800, size 3, enabled
map[14]: type 4, range 32, base 0000bc00, size 2, enabled
map[18]: type 4, range 32, base 0000c000, size 3, enabled
map[1c]: type 4, range 32, base 0000c400, size 2, enabled
map[20]: type 4, range 32, base 0000c800, size 6, enabled
map[24]: type 1, range 32, base db000000, size 17, enabled
found-> vendor=0x105a, dev=0x0d30, revid=0x02
bus=0, slot=12, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 1 supports D0 D3 current D0
Freeing (NOT implemented) redirected PCI irq 9.
map[10]: type 1, range 32, base db024000, size 11, enabled
map[14]: type 1, range 32, base db020000, size 14, enabled
found-> vendor=0x104c, dev=0x8020, revid=0x00
bus=0, slot=13, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=2
powerspec 1 supports D0 D2 D3 current D0
IOAPIC #0 intpin 16 -> irq 9
Freeing (NOT implemented) redirected PCI irq 5.
map[10]: type 4, range 32, base 0000cc00, size 8, enabled
map[14]: type 1, range 32, base db025000, size 8, enabled
found-> vendor=0x1106, dev=0x3065, revid=0x43
bus=0, slot=14, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D3 current D0
IOAPIC #0 intpin 17 -> irq 10
Freeing (NOT implemented) redirected PCI irq 11.
map[10]: type 4, range 32, base 0000d000, size 3, enabled
map[14]: type 4, range 32, base 0000d400, size 3, enabled
map[18]: type 4, range 32, base 0000d800, size 3, enabled
map[1c]: type 4, range 32, base 0000dc00, size 3, enabled
map[20]: type 4, range 32, base 0000e000, size 3, enabled
map[24]: type 4, range 32, base 0000e400, size 4, enabled
found-> vendor=0x9710, dev=0x9815, revid=0x01
bus=0, slot=15, func=0
class=07-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
Freeing (NOT implemented) redirected PCI irq 10.
map[10]: type 4, range 32, base 0000e800, size 8, enabled
map[14]: type 1, range 32, base db026000, size 8, enabled
found-> vendor=0x10cd, dev=0x1300, revid=0x03
bus=0, slot=16, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=5
Freeing (NOT implemented) redirected PCI irq 11.
map[10]: type 4, range 32, base 0000ec00, size 8, enabled
map[14]: type 1, range 32, base db027000, size 8, enabled
map[18]: type 1, range 32, base db028000, size 12, enabled
found-> vendor=0x1000, dev=0x000f, revid=0x26
bus=0, slot=18, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x86 (4020 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=10
powerspec 1 supports D0 D3 current D0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x9000-0x9fff
pcib1: memory decode 0xd8000000-0xd9ffffff
pcib1: prefetched decode 0xd4000000-0xd7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
Freeing (NOT implemented) redirected PCI irq 5.
map[10]: type 3, range 32, base d4000000, size 26, enabled
map[14]: type 4, range 32, base 00009000, size 8, enabled
map[18]: type 1, range 32, base d9000000, size 14, enabled
found-> vendor=0x1002, dev=0x524c, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 1 supports D0 D1 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xa000-0xa00f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xa000
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xa008
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI 00 00
ata1-slave: ATAPI 00 00
ata1: mask=03 stat0=50 stat1=00
ata1-master: ATA 01 a5
ata1: devices=01
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xa400-0xa41f irq 2 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xa800-0xa81f irq 2 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <multimedia, audio> at device 7.5 (no driver attached)
atapci1: <Promise ATA100 controller> port 0xc800-0xc83f,0xc400-0xc403,0xc000-0xc007,0xbc00-0xbc03,0xb800-0xb807 mem 0xdb000000-0xdb01ffff irq 5 at device 12.0 on pci0
ata2: iobase=0xb800 altiobase=0xbc02 bmaddr=0xc800
ata2: mask=03 ostat0=00 ostat2=00
ata2-master: ATAPI 00 00
ata2-slave: ATAPI 00 00
ata2: mask=03 stat0=00 stat1=00
ata2: devices=00
ata2: at 0xb800 on atapci1
ata3: iobase=0xc000 altiobase=0xc402 bmaddr=0xc808
ata3: mask=03 ostat0=00 ostat2=00
ata3-master: ATAPI 14 eb
ata3-slave: ATAPI 10 10
ata3: mask=03 stat0=00 stat1=00
ata3: devices=04
ata3: at 0xc000 on atapci1
pci0: <serial bus, FireWire> at device 13.0 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xcc00-0xccff mem 0xdb025000-0xdb0250ff irq 9 at device 14.0 on pci0
vr0: Ethernet address: 00:50:ba:21:d7:c7
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x000580, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: bpf attached
pci0: <simple comms> at device 15.0 (no driver attached)
adv0: <AdvanSys ASC3030/50 SCSI controller> port 0xe800-0xe8ff mem 0xdb026000-0xdb0260ff irq 5 at device 16.0 on pci0
adv0: Warning EEPROM Checksum mismatch. Using default device parameters
adv0: AdvanSys SCSI Host Adapter, SCSI ID 7, queue depth 16
sym0: <875> port 0xec00-0xecff mem 0xdb028000-0xdb028fff,0xdb027000-0xdb0270ff irq 10 at device 18.0 on pci0
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
unknown: not probed (disabled)
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
unknown: not probed (disabled)
unknown: not probed (disabled)
adv: adv0 already exists; skipping it
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc8000-0xcbfff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at port 0x140-0x15f on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 failed to probe at port 0x134-0x137 on isa0
cs0 failed to probe at port 0x300-0x31f on isa0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
fe0 failed to probe at port 0x300-0x31f on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
fb: new array size 4
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: Cannot allocate irq
sn0 failed to probe at port 0x300-0x30f irq 10 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0 failed to probe on isa0
isa_probe_children: probing PnP devices
SMP: enabled INTs: 1, 2, 3, 4, 5, 6, 7, 9, 10, 11, 12, 14, 15, apic_imen: 0xffff2101
BIOS Geometries:
0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
1:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
procfs registered
Timecounters tick every 10.000 msec
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
lo0: bpf attached
acpi_cpu: CPU throttling enabled, 2 steps from 100% to 50.0%
ad0: success setting UDMA4 on VIA chip
GEOM: new disk ad0
ar: FreeBSD check1 failed
ad0: <WDC WD450AA-00BAA0/10.09K11> ATA-4 disk at ata0-master
ad0: 42934MB (87930864 sectors), 87233 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA66
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
ad2: success setting UDMA5 on VIA chip
MBR Slice 1 on ad0:
0000 00 01 01 00 a5 fe ff ff 3f 00 00 00 e2 9b 3d 05 |........?.....=.|
[0] f:00 typ:165 s(CHS):0/1/1 e(CHS):255/254/255 s:63 l:87923682
GEOM: Add ad0s1, start 32256 length 45016925184 end 45016957439
ar: FreeBSD check1 failed
ad2: <WDC WD600AB-00CDB0/22.04A22> ATA-5 disk at ata1-master
ad2: 57241MB (117231408 sectors), 116301 C, 16 H, 63 S, 512 B
ad2: 16 secs/int, 1 depth queue, UDMA100
ad2: piomode=4 dmamode=2 udmamode=5 cblid=1
ata3-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata3-master: success setting PIO4 on Promise chip
GEOM: new disk ad2
GEOM: Configure ad0s1a, start 1073741824 length 104857600 end 1178599423
GEOM: Configure ad0s1b, start 0 length 1073741824 end 1073741823
GEOM: Configure ad0s1c, start 0 length 45016925184 end 45016925183
GEOM: Configure ad0s1e, start 1178599424 length 8589934592 end 9768534015
GEOM: Configure ad0s1f, start 9768534016 length 8589934592 end 18358468607
GEOM: Configure ad0s1g, start 18358468608 length 2147483648 end 20505952255
GEOM: Configure ad0s1h, start 20505952256 length 24510972928 end 45016925183
acd0: <ATAPI CDROM 52X/V110A> CDROM drive at ata3 as master
acd0: 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Waiting 15 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
MBR Slice 1 on ad2:
0000 80 01 01 00 a5 fe ff ff 3f 00 00 00 02 bb fc 06 |........?.......|
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):255/254/255 s:63 l:117226242
GEOM: Add ad2s1, start 32256 length 60019835904 end 60019868159
GEOM: Configure ad2s1a, start 0 length 157286400 end 157286399
GEOM: Configure ad2s1b, start 157286400 length 3221225472 end 3378511871
GEOM: Configure ad2s1c, start 0 length 60019835904 end 60019835903
GEOM: Configure ad2s1d, start 3378511872 length 3221225472 end 6599737343
GEOM: Configure ad2s1e, start 6599737344 length 3221225472 end 9820962815
GEOM: Configure ad2s1f, start 9820962816 length 50198873088 end 60019835903
(probe10:sym0:0:3:0): error 22
(probe10:sym0:0:3:0): Unretryable Error
pass0 at sym0 bus 0 target 3 lun 0
pass0: <YAMAHA CRW8824S 1.00> Removable CD-ROM SCSI-2 device
pass0: 20.000MB/s transfers (20.000MHz, offset 15)
SMP: AP CPU #1 Launched!
SMP: CPU1 ap_init():
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
Mounting root from ufs:/dev/ad2s1a
WARNING: / was not properly dismounted
(cd0:sym0:0:3:0): Retrying Command
start_init: trying /sbin/init
cd0 at sym0 bus 0 target 3 lun 0
cd0: <YAMAHA CRW8824S 1.00> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: cd present [330962 x 2048 byte records]
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
splash: image decoder found: logo_saver
Linux ELF exec handler installed
cu
Gerrit
--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021206151723.GA3905>