Date: Fri, 20 Jan 2006 10:10:05 GMT From: Alessandro Dellavedova <alessandro.dellavedova@ifom-ieo-campus.it> To: freebsd-i386@FreeBSD.org Subject: Re: i386/91745: Second processor not detected on Proliant ML530 G2 with latest ROM firmware Message-ID: <200601201010.k0KAA5ox093767@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR i386/91745; it has been noted by GNATS.
From: Alessandro Dellavedova <alessandro.dellavedova@ifom-ieo-campus.it>
To: bug-followup@FreeBSD.org
Cc:
Subject: Re: i386/91745: Second processor not detected on Proliant ML530 G2 with latest ROM firmware
Date: Fri, 20 Jan 2006 11:03:29 +0100
I've done a tests using FreeBSD 5.2.1, GENERIC kernel compiled with
SMP support, the second processor is correctly identified and launched:
FreeBSD 5.2.1-RELEASE FreeBSD 5.2.1-RELEASE #0: Thu Jan 19 17:18:58
GMT 2006 root@:/usr/obj/usr/src/sys/GENERIC i386
# dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 5.2.1-RELEASE #0: Thu Jan 19 17:18:58 GMT 2006
root@:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a35000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a35244.
ACPI APIC Table: <COMPAQ 00000083>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) XEON(TM) CPU 2.40GHz (2399.93-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE
,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
Hyperthreading: 2 logical CPUs
real memory = 2147459072 (2047 MB)
avail memory = 2080706560 (1984 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 6
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic2 <Version 1.1> irqs 32-47 on motherboard
ioapic3 <Version 1.1> irqs 48-63 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <COMPAQ P22 > on motherboard
ACPI-1016: *** Info: There are no GPE blocks defined in the FADT
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
pcibios: BIOS version 2.10
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x920-0x923 on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_cpu2: <CPU> on acpi0
device_probe_and_attach: acpi_cpu2 attach returned 6
acpi_cpu2: <CPU> on acpi0
device_probe_and_attach: acpi_cpu2 attach returned 6
acpi_cpu2: <CPU> on acpi0
device_probe_and_attach: acpi_cpu2 attach returned 6
acpi_cpu2: <CPU> on acpi0
device_probe_and_attach: acpi_cpu2 attach returned 6
acpi_cpu2: <CPU> on acpi0
device_probe_and_attach: acpi_cpu2 attach returned 6
acpi_cpu2: <CPU> on acpi0
device_probe_and_attach: acpi_cpu2 attach returned 6
acpi_tz0: <Thermal Zone> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 15 INTA is routed to irq 10
pci0: <base peripheral> at device 2.0 (no driver attached)
pci0: <display, VGA> at device 3.0 (no driver attached)
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x2800-0x283f mem
0xf5e00000-0xf5efffff,0xf5fe0000-0xf5fe0fff irq 29 at device 4.0 on pci0
fxp0: Ethernet address 00:08:02:b0:8c:47
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec (Compaq OEM) 3960D Ultra160 SCSI adapter> port
0x2c00-0x2cff mem 0xf5df0000-0xf5df0fff irq 30 at device 5.0 on pci0
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec (Compaq OEM) 3960D Ultra160 SCSI adapter> port
0x3000-0x30ff mem 0xf5de0000-0xf5de0fff irq 31 at device 5.1 on pci0
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks CSB5 UDMA100 controller> port 0x2000-0x200f,
0-0x3,0-0x7,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: simplex device, DMA on primary only
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
ohci0: <OHCI (generic) USB controller> mem 0xf5dd0000-0xf5dd0fff irq
10 at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 2.0 on pci1
pci2: <PCI bus> on pcib2
pcib2: slot 4 INTA is routed to irq 18
pcib2: slot 5 INTA is routed to irq 19
pcib2: slot 6 INTA is routed to irq 18
fxp1: <Intel 82559 Pro/100 Ethernet> port 0x4000-0x403f mem
0xf7d00000-0xf7dfffff,0xf7ef0000-0xf7ef0fff irq 18 at device 4.0 on pci2
fxp1: Ethernet address 00:08:02:b0:18:78
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp2: <Intel 82559 Pro/100 Ethernet> port 0x4040-0x407f mem
0xf7b00000-0xf7bfffff,0xf7cf0000-0xf7cf0fff irq 19 at device 5.0 on pci2
fxp2: Ethernet address 00:08:02:b0:18:79
miibus2: <MII bus> on fxp2
inphy2: <i82555 10/100 media interface> on miibus2
inphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> mem
0xf7ad0000-0xf7adffff,0xf7ae0000-0xf7afffff irq 18 at device 6.0 on pci2
em0: Speed:N/A Duplex:N/A
pci1: <base peripheral> at device 30.0 (no driver attached)
pcib3: <ACPI Host-PCI bridge> on acpi0
pci5: <ACPI PCI bus> on pcib3
pci5: <base peripheral> at device 30.0 (no driver attached)
pcib4: <ACPI Host-PCI bridge> on acpi0
pci9: <ACPI PCI bus> on pcib4
pcib5: <ACPI Host-PCI bridge> on acpi0
pci13: <ACPI PCI bus> on pcib5
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
ppc0 port 0x778-0x77d,0x378-0x37f irq 7 drq 0 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
acpi_cpu2: <CPU> on acpi0
device_probe_and_attach: acpi_cpu2 attach returned 6
acpi_cpu2: <CPU> on acpi0
device_probe_and_attach: acpi_cpu2 attach returned 6
acpi_cpu2: <CPU> on acpi0
device_probe_and_attach: acpi_cpu2 attach returned 6
acpi_cpu2: <CPU> on acpi0
device_probe_and_attach: acpi_cpu2 attach returned 6
acpi_cpu2: <CPU> on acpi0
device_probe_and_attach: acpi_cpu2 attach returned 6
acpi_cpu2: <CPU> on acpi0
device_probe_and_attach: acpi_cpu2 attach returned 6
orm0: <Option ROMs> at iomem 0xee000-0xeffff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
Timecounters tick every 10.000 msec
acd0: CDROM <COMPAQ SC-140C> at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
GEOM: create disk da0 dp=0xc86b9850
pass1 at ahc0 bus 0 target 15 lun 0
pass1: <COMPAQ PROLIANT 4L2I 1.70> Fixed Processor SCSI-2 device
pass1: 3.300MB/s transfers
da0 at ahc0 bus 0 target 0 lun 0
da0: <COMPAQ BD0186459A B016> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged
Queueing Enabled
da0: 17365MB (35565080 512 byte sectors: 255H 63S/T 2213C)
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/da0s1a
em0: Link is up 100 Mbps Full Duplex
# sysctl -a | grep smp
kern.timecounter.smp_tsc: 0
kern.smp.active: 1
kern.smp.disabled: 0
kern.smp.cpus: 2
kern.smp.forward_signal_enabled: 1
kern.smp.forward_roundrobin_enabled: 1
# sysctl -a | grep ncpu
hw.ncpu: 2
Maybe something changed in the APIC management since 5.2.1 and thus
resulting in the processor not being detected on 5.4 ?
I will try also with FreeBSD 6.0, and if somebody of the src
mantainers are willing to help I can give unrestricted SSH access to
the machine.
Thank you for your time, best regards
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200601201010.k0KAA5ox093767>