From owner-freebsd-stable Tue Oct 12 9: 6:58 1999 Delivered-To: freebsd-stable@freebsd.org Received: from horst.bfd.com (horst.bfd.com [12.9.219.10]) by hub.freebsd.org (Postfix) with ESMTP id BE6DE15A4D for ; Tue, 12 Oct 1999 09:06:54 -0700 (PDT) (envelope-from ejs@bfd.com) Received: from HARLIE.bfd.com (bastion.bfd.com [12.9.219.14]) by horst.bfd.com (8.9.3/8.9.3) with ESMTP id JAA22761; Tue, 12 Oct 1999 09:06:52 -0700 (PDT) (envelope-from ejs@bfd.com) Date: Tue, 12 Oct 1999 09:06:52 -0700 (PDT) From: "Eric J. Schwertfeger" To: Mike Pontillo Cc: freebsd-stable@FreeBSD.ORG Subject: Re: NICs In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, 11 Oct 1999, Mike Pontillo wrote: > If it is NE2000 compatible, it should work with Linux or FreeBSD > no problem. In Linux, you want to use the "ne" kernel module if it is an > ISA card, or the "ne2k-pci" module if it is a PCI card. Slackware comes > with these modules and all you should have to do is run "modprobe > ". > They should work in FreeBSD also -- although I couldn't give you > very specific details, as I don't know a whole lot about FreeBSD; that's > why I'm on this mailing list. =) But NE2000 cards are very standardized. > If you have trouble finding one that works, go to CompUSA and pick up a > $15-20 D-Link PCI NIC. These are NE2000 compatible and I've found that > they work rather well. Most any NE2000 compatible card should work though. After a business trip out of town, I managed to get the owner for a small company to realize that buying the cheapest possible NICs wasn't the way to run a consulting business. He had picked up 5 of the D-Link 10/100 PCI nics. One wouldn't work at all (nothing we did would even show that the card existed), one had a packet loss rate of about 30%, and none of them wanted to work on the customers 10BaseT network. Between this and the fact that the D-Link cards change regularly (often in ways that older FreeBSD drivers don't like), he finally agreed to change that policy. We'll probably be going Intel EtherExpress Pro's in the future, though I understand we should avoid the NEC SCSI cards with these. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message