Date: Thu, 6 Nov 1997 16:57:48 -0500 (EST) From: Gang-Ryung Uh <uh@NU.cs.fsu.edu> To: questions@freebsd.org Subject: 3C589D Message-ID: <199711062157.QAA00784@upsilon.cs.fsu.edu>
next in thread | raw e-mail | index | archive | help
Hi,
I am running FreeBSD 2.2.2 with PAO patch on my laptop.
The system can recognize the hot insertion of the 3C589D
PCMCIA card. However, the system is locked up when the
hot removal of the PCMCIA card. Any help will be appreciated.
Sincerely,
Gang-Ryung Uh
ps. the attacted are "pccard.conf" and "rc.conf"
--------------
| pccard.conf: |
--------------
# 3Com Etherlink III 3C589, 3C589B, 3C589C, 3C589D
card "3Com Corporation" "3C589D"
config 0x1 "ep0" 11
insert echo 3Com Etherlink III inserted
insert /etc/pccard_ether ep0 -link0 link1
remove echo 3Com Etherlink III removed
remove /sbin/ifconfig ep0 delete
----------
| rc.conf: |
----------
#!/bin/sh
swapfile="NO" # Set to name of swapfile if aux swapfile desired.
apm_enable="YES" # Set to YES if you want APM enabled.
pccard_enable="YES" # Set to YES if you want to configure PCCARD devices.
pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address.
#pccardd=/stand/pccardd
#pccardc=/stand/pccardd
local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs.
hostname="jonah.cs.fsu.edu" # Set this!
nisdomainname="cs.fsu.edu" # Set to NIS domain if using NIS (or NO).
firewall="NO" # Set to firewall type or NO for none.
tcp_extensions="YES" # Allow RFC1323 & RFC1544 extensions (or NO).
network_interfaces="lo0" # List of network interfaces (lo0 is loopback).
ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
syslogd_enable="YES" # Run syslog daemon (or NO).
syslogd_flags="" # Flags to syslogd (if enabled).
inetd_flags="" # Optional flags to inetd (always enabled).
named_enable="NO" # Run named, the DNS server (or NO).
named_flags="" # Flags to named (if enabled).
kerberos_server_enable="NO" # Run a kerberos master server (or NO).
rwhod_enable="NO" # Run the rwho daemon (or NO).
amd_enable="NO" # Run amd service with $amd_flags (or NO).
amd_flags="-a /net -c 1800 -k i386 -d my.domain -l syslog /host /etc/amd.map"
nfs_client_enable="NO" # This host is an NFS client (or NO).
nfs_server_enable="NO" # This host is an NFS server (or NO).
weak_mountd_authentication="NO" # Running PCNFSD / other non-root nfsd (or NO).
nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server.
rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO).
portmap_enable="YES" # Run the portmapper service (or NO).
portmap_flags="" # Flags to portmap (if enabled).
xtend_enable="NO" # Run the X-10 power controller daemon.
xtend_flags="" # Flags to xtend (if enabled).
timed_enabled="NO" # Run the time daemon (or NO).
timed_flags="" # Flags to timed (if enabled).
ntpdate_enable="NO" # Run the ntpdate to sync time (or NO).
ntpdate_flags="" # Flags to ntpdate (if enabled).
xntpd_enable="NO" # Run xntpd Network Time Protocol (or NO).
xntpd_flags="" # Flags to xntpd (if enabled).
tickadj_enable="NO" # Run tickadj (or NO).
tickadj_flags="-Aq" # Flags to tickadj (if enabled).
nis_client_enable="NO" # We're an NIS client (or NO)
nis_client_flags="" # Flags to ypbind (if enabled).
nis_ypset_enable="NO" # Run ypset at boot time (or NO).
nis_ypset_flags="" # Flags to ypset (if enabled).
nis_server_enable="NO" # We're an NIS server (or NO)
nis_server_flags="" # Flags to ypserv (if enabled).
nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
defaultrouter="128.186.121.1" # Set to default gateway (or NO).
static_routes="" # Set to static route list (or leave empty).
gateway_enable="NO" # Set to YES if this host will be a gateway.
router_enable="NO" # Set to YES to enable a routing daemon.
router="routed" # Name of routing daemon to use if enabled.
router_flags="-q" # Flags for routing daemon.
mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf)
ipxgateway_enable="NO" # Set to YES to enable IPX routing.
ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon.
ipxrouted_flags="" # Flags for IPX routing daemon.
arpproxy_all="" # obsolete kernel option ARP_PROXY_ALL equiv.
keymap="us.isox" # keymap in /usr/share/syscons/keymaps/* (or NO).
keyrate="fast" # keyboard rate to: slow, normal, fast (or NO).
keybell="NO" # bell to duration.pitch or normal or visual (or NO).
keychange="NO" # function keys default values (or NO).
cursor="NO" # cursor type {normal|blink|destructive} (or NO).
scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
blanktime="300" # blank time (in seconds) or "NO" to turn it off.
saver="star" # screen saver desired: blank/green/snake/star/NO.
mousedtype="NO" # See man page for rc.conf(8) for available settings.
mousedport="/dev/cuaa0" # Set to your mouse port (required if mousetype set)
mousedflags="" # Any additional flags to moused.
##############################################################
### PC-card options ########################################
##############################################################
#pccard_ether="ed0 ep0 fe0 sn0" # Pccard ethernet interfaces (or NO).
pccard_ether="ep0" # Pccard ethernet interfaces (or NO).
ifconfig_common="inet 128.186.121.99 netmask 255.255.255.0"
#ifconfig_ed0="$ifconfig_common"
ifconfig_ep0="$ifconfig_common"
#ifconfig_fe0="$ifconfig_common"
#ifconfig_sn0="$ifconfig_common"
##############################################################
### Miscellaneous administrative options ###################
##############################################################
lpd_enable="YES" # Run the line printer daemon
sendmail_enable="YES" # Run the sendmail daemon (or NO).
sendmail_flags="-bd" # -bd is pretty mandatory
savecore_enable="NO" # Save kernel crashdumps for debugging (or NO).
dumpdev="NO" # Device name to crashdump to (if enabled).
check_quotas="NO" # Check quotas (or NO).
accounting="NO" # Turn on process accounting (or NO).
ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO).
linux_enable="YES" # Linux emulation loaded at startup (or NO).
rand_irqs="NO" # Stir the entropy pool (or NO).
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199711062157.QAA00784>