Date: Wed, 28 Dec 2005 16:16:28 -0800 From: FreeBsdBeni <freebsdbeni@spymac.com> To: freebsd-questions@freebsd.org Subject: Re: dvd drive Message-ID: <200512281616.32589.freebsdbeni@spymac.com> In-Reply-To: <B8F6F165-407E-4CDE-B884-F47102BCA653@redry.net> References: <244E8E94-A4F7-48B9-B527-06EF505B3BC9@redry.net> <ab3b3690512280700jb396abdha5e000222066b08c@mail.gmail.com> <B8F6F165-407E-4CDE-B884-F47102BCA653@redry.net>
next in thread | previous in thread | raw e-mail | index | archive | help
--nextPart1533990.cebKsZ2pIN Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline On Wednesday 28 December 2005 07:08, eoghan wrote: > On 28 Dec 2005, at 15:00, Roshan wrote: > > On 12/28/05, eoghan <freebsd@redry.net> wrote: > >> On 28 Dec 2005, at 15:55, Tofik Suleymanov wrote: > >>> eoghan wrote: > >>>> Hello > >>>> Im wondering how to tell freeBSD about my 2 dvd drives. k3b > >>>> automatically detects them but it hasnt found either. > >>>> Thanks > >>>> Eoghan > >>>> _______________________________________________ > >>>> freebsd-questions@freebsd.org mailing list > >>>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions > >>>> To unsubscribe, send any mail to "freebsd-questions- > >>>> unsubscribe@freebsd.org" > >>> > >>> Post your dmesg output here. > >> > >> I have copied it below, thanks: > >> > >> Copyright (c) 1992-2005 The FreeBSD Project. > >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, > >> 1993, 1994 > >> The Regents of the University of California. All rights > >> reserved. > >> FreeBSD 6.0-RELEASE #0: Sun Dec 4 17:43:10 UTC 2005 > >> root@nathaniel:/usr/obj/usr/src/sys/GENERIC > >> Timecounter "i8254" frequency 1193182 Hz quality 0 > >> CPU: Intel(R) Pentium(R) 4 CPU 1400MHz (1395.76-MHz 686-class CPU) > >> Origin =3D "GenuineIntel" Id =3D 0xf07 Stepping =3D 7 > >> > >> Features=3D0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,M > >> CA, > >> CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM> > >> real memory =3D 402157568 (383 MB) > >> avail memory =3D 384102400 (366 MB) > >> npx0: [FAST] > >> npx0: <math processor> on motherboard > >> npx0: INT 16 interface > >> acpi0: <DELL DIM 8100> on motherboard > >> acpi0: Power Button (fixed) > >> pci_link0: <ACPI PCI Link LNKA> irq 3 on acpi0 > >> pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0 > >> pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0 > >> pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0 > >> pci_link4: <ACPI PCI Link LNKE> on acpi0 > >> pci_link5: <ACPI PCI Link LNKF> on acpi0 > >> pci_link6: <ACPI PCI Link LNKG> on acpi0 > >> pci_link7: <ACPI PCI Link LNKH> irq 9 on acpi0 > >> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > >> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > >> cpu0: <ACPI CPU> on acpi0 > >> acpi_button0: <Power Button> on acpi0 > >> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > >> pci0: <ACPI PCI bus> on pcib0 > >> agp0: <Intel 82850 host to AGP bridge> mem 0xe8000000-0xefffffff at > >> device 0.0 on pci0 > >> pcib1: <PCI-PCI bridge> at device 1.0 on pci0 > >> pci1: <PCI bus> on pcib1 > >> pci1: <display, VGA> at device 0.0 (no driver attached) > >> pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > >> pci2: <ACPI PCI bus> on pcib2 > >> fwohci0: <VIA Fire II (VT6306)> port 0xec80-0xecff mem > >> 0xff1ff800-0xff1fffff irq 10 at device 8.0 on pci2 > >> fwohci0: OHCI version 1.0 (ROM=3D1) > >> fwohci0: No. of Isochronous channels is 8. > >> fwohci0: EUI64 00:11:06:00:00:99:d9:eb > >> fwohci0: Phy 1394a available S400, 3 ports. > >> fwohci0: Link S400, max_rec 2048 bytes. > >> firewire0: <IEEE1394(FireWire) bus> on fwohci0 > >> fwe0: <Ethernet over FireWire> on firewire0 > >> if_fwe0: Fake Ethernet address: 02:11:06:99:d9:eb > >> fwe0: Ethernet address: 02:11:06:99:d9:eb > >> fwe0: if_start running deferred for Giant > >> sbp0: <SBP-2/SCSI over FireWire> on firewire0 > >> fwohci0: Initiate bus reset > >> fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode > >> firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me) > >> firewire0: bus manager 0 (me) > >> pci2: <multimedia, audio> at device 10.0 (no driver attached) > >> pci2: <simple comms> at device 11.0 (no driver attached) > >> xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xe880-0xe8ff mem > >> 0xff1ff400-0xff1ff47f irq 11 at device 12.0 on pci2 > >> miibus0: <MII bus> on xl0 > >> ukphy0: <Generic IEEE 802.3u media interface> on miibus0 > >> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > >> xl0: Ethernet address: 00:b0:d0:e7:e9:7d > >> isab0: <PCI-ISA bridge> at device 31.0 on pci0 > >> isa0: <ISA bus> on isab0 > >> atapci0: <Intel ICH2 UDMA100 controller> port > >> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 > >> on pci0 > >> ata0: <ATA channel 0> on atapci0 > >> ata1: <ATA channel 1> on atapci0 > >> uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port > >> 0xff80-0xff9f irq 11 at device 31.2 on pci0 > >> uhci0: [GIANT-LOCKED] > >> usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 > >> usb0: USB revision 1.0 > >> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > >> uhub0: 2 ports with 2 removable, self powered > >> pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > >> uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port > >> 0xff60-0xff7f irq 9 at device 31.4 on pci0 > >> uhci1: [GIANT-LOCKED] > >> usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1 > >> usb1: USB revision 1.0 > >> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > >> uhub1: 2 ports with 2 removable, self powered > >> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on > >> acpi0 > >> fdc0: [FAST] > >> fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > >> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > >> atkbd0: <AT Keyboard> irq 1 on atkbdc0 > >> kbd0 at atkbd0 > >> atkbd0: [GIANT-LOCKED] > >> psm0: <PS/2 Mouse> irq 12 on atkbdc0 > >> psm0: [GIANT-LOCKED] > >> psm0: model IntelliMouse, device ID 3 > >> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 > >> on acpi0 > >> sio0: type 16550A > >> ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 > >> on acpi0 > >> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > >> ppc0: FIFO with 16/16/8 bytes threshold > >> ppbus0: <Parallel port bus> on ppc0 > >> plip0: <PLIP network interface> on ppbus0 > >> lpt0: <Printer> on ppbus0 > >> lpt0: Interrupt-driven port > >> ppi0: <Parallel I/O> on ppbus0 > >> pmtimer0 on isa0 > >> orm0: <ISA Option ROMs> at iomem 0xc0000-0xca7ff,0xca800-0xcbfff > >> on isa0 > >> sc0: <System console> at flags 0x100 on isa0 > >> sc0: VGA <16 virtual consoles, flags=3D0x300> > >> sio1: configured irq 3 not in bitmap of probed irqs 0 > >> sio1: port may not be enabled > >> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on > >> isa0 > >> Timecounter "TSC" frequency 1395762544 Hz quality 800 > >> Timecounters tick every 1.000 msec > >> ad0: FAILURE - SET_MULTI status=3D51<READY,DSC,ERROR> error=3D4<ABORTE= D> > >> ad0: 19470MB <QUANTUM FIREBALLlct20 20 APL.0900> at ata0-master > >> UDMA100 > >> ad1: 78167MB <Maxtor 4R080J0 RAMB1TU0> at ata0-slave UDMA100 > >> acd0: DVDROM <NEC DV-5800A/1.07> at ata1-master UDMA33 > >> acd1: DVDR <NEC DVD RW ND-3500AG/2.16> at ata1-slave UDMA33 > >> Trying to mount root from ufs:/dev/ad0s1a > >> > >> _______________________________________________ > >> freebsd-questions@freebsd.org mailing list > >> http://lists.freebsd.org/mailman/listinfo/freebsd-questions > >> To unsubscribe, send any mail to "freebsd-questions- > >> unsubscribe@freebsd.org" > > > > I can see that the drives have been detected as acd0 and acd1 and > > everything seems to be working normally. > > > > Can you describe your problem in more detail ? > > > > Are you not able to mount a data cd-rom when then latter is in the > > drive? > > > > Have you created mount points for your cd-rom drives e.g /cdrom and > > /cdrom1 and tried mounting them ? > > > > > > Roshan > > Hi Roshan > Im using K3b, and its not seeing either drive. If I try add it like / > dev/acd0 or /dev/acd1 it says it could not find additional device. > I have not created mount points. The docs go through this is guess? > Thanks > Eoghan > See also the /usr/ports/sysutils/k3b/pkg-message5 about the use of k3b. =2D-=20 Beni. --nextPart1533990.cebKsZ2pIN Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (FreeBSD) iD8DBQBDsyrg98oeEzEDrEcRAu6IAJ4xAqsrIsOyCKNtRQ3ZfTHkAFZhGQCglPnz r9qc5OSDRfos+0bYQnsnJMk= =RNTH -----END PGP SIGNATURE----- --nextPart1533990.cebKsZ2pIN--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200512281616.32589.freebsdbeni>