Date: Tue, 04 May 1999 15:59:34 +0200 From: "Loic Mahe'" <mahe@twam.com> To: freebsd-questions@freebsd.org Subject: [Problem] Bad DMI table checksum Message-ID: <372EFD46.4A825C38@twam.com>
next in thread | raw e-mail | index | archive | help
Hello,
I'm using FreeBSD 3.1 on a Pentium 333 [64 Mb RAM] and I get
the following error message at early boot time :
> Bad DMI table checksum!
Everything seems to work well, but perhaps this will help ...
Below is dmesg.
Loic, Toulouse - France
-------------
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.1-RELEASE #0: Wed Mar 31 11:41:25 CEST 1999
root@twamx.twam:/usr/src/sys/compile/NOYAU
Timecounter "i8254" frequency 1193182 Hz
CPU: Celeron (334.09-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x660 Stepping=0
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,<b24>>
real memory = 67108864 (65536K bytes)
avail memory = 62496768 (61032K bytes)
Bad DMI table checksum!
Preloaded elf kernel "kernel" at 0xf02a6000.
Probing for devices on PCI bus 0:
chip0: <Host to PCI bridge (vendor=1106 device=0691)> rev 0x01 on
pci0.0.0
chip1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI bridge> rev 0x00 on pci0.1.0
chip2: <VIA 82C586 PCI-ISA bridge> rev 0x47 on pci0.7.0
ide_pci0: <VIA 82C586x (Apollo) Bus-master IDE controller> rev 0x06 on
pci0.7.1
uhci0: <VIA 83C572 USB Host Controller> rev 0x02 int d irq 10 on
pci0.7.2
chip3: <VIA 82C586B ACPI interface> rev 0x10 on pci0.7.3
ed1: <NE2000 PCI Ethernet (RealTek 8029)> rev 0x00 int a irq 11 on
pci0.8.0
ed1: address 00:20:18:56:22:ba, type NE2000 (16 bit)
Probing for devices on PCI bus 1:
vga0: <SiS model 6326 VGA-compatible display device> rev 0x0b on
pci1.0.0
Probing for PnP devices:
CSN 1 Vendor ID: CMI0001 [0x0100a90d] Serial 0x01000100 Comp ID: @@@0000
[0x00000000]
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x300-0x31f irq 5 on isa
ed0: address 00:20:18:63:2b:e5, type NE2000 (16 bit)
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <FUJITSU MPC3032AT>
wd0: 3093MB (6335280 sectors), 6704 cyls, 15 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <IDE/ATAPI CD-ROM 36X/T6C4>, removable, accel,
dma, iordy
acd0: drive speed 0 - 2750KB/sec, 128KB cache
acd0: supported read types: CD-R, CD-RW, CD-DA, packet track
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
ppc0 at 0x378 irq 7 on isa
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
nlpt0: <generic printer> on ppbus 0
nlpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
apm0 flags 0x31 on isa
apm: found APM BIOS version 1.2
usb0: <VIA 83C572 USB Host Controller>
usb0: root device is not a hub
device_probe_and_attach: usb0 attach returned 6
usb0: Host System Error
usb0: controller halted
changing root device to wd0s1a
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?372EFD46.4A825C38>