Date: Sun, 2 Feb 1997 17:21:41 -0800 (PST) From: Dan Busarow <dan@dpcsys.com> To: freebsd-questions@freebsd.org Subject: syslogd runaway on 2.2-BETA Message-ID: <Pine.UW2.3.95.970202164445.3403C-100000@cedb>
next in thread | raw e-mail | index | archive | help
Hi, I just installed 2.2-BETA on a system with an AMD-K75, 8MB RAM and a Fujitsu IDE drive. Box also has 3 PCI NE-2000's I've got two of them ifconfig'd but only one is plugged into a network. I get the same symptoms if I don't ifconfig the 2nd nic. Everything seems to work fine except for a load average of 1.0 on a quiet system. top shows syslogd chewing up 99+ % of the CPU The only thing unusual is that I'm running headless with sc0 disabled. I do have a getty running on ttyv0 in case I want to plug a monitor in. Can anyone think of what might be causing syslogd to act like this? top, dmesg etc follow Thanks, Dan -- Dan Busarow 714 443 4172 DPC Systems / Beach.Net dan@dpcsys.com Dana Point, California 83 09 EF 59 E0 11 89 B4 8D 09 DB FD E1 DD 0C 82 top: last pid: 170; load averages: 0.99, 0.89, 0.53 17:15:59 9 processes: 3 running, 6 sleeping CPU states: 16.4% user, 0.0% nice, 83.0% system, 0.7% interrupt, 0.0% idle Mem: 3632K Active, 508K Inact, 1384K Wired, 696K Cache, 517K Buf, 696K Free Swap: 26M Total, 64K Used, 25M Free PID USERNAME PRI NICE SIZE RES STATE TIME WCPU CPU COMMAND 79 root 98 0 196K 552K RUN 11:24 99.22% 99.22% syslogd 167 dan 28 0 284K 792K RUN 0:00 0.00% 0.00% top 113 root 18 0 332K 588K pause 0:00 0.00% 0.00% cron 151 root 18 0 156K 544K pause 0:00 0.00% 0.00% getty 161 dan 18 0 448K 308K pause 0:00 0.00% 0.00% csh 1 root 10 0 448K 196K wait 0:00 0.00% 0.00% init 111 root 2 0 192K 568K select 0:00 0.00% 0.00% inetd 90 daemon 2 0 176K 536K select 0:00 0.00% 0.00% portmap 160 root 28 0 168K 604K RUN 0:00 0.00% 0.00% rlogind lisocreek: [2] ps -wax PID TT STAT TIME COMMAND 0 ?? DLs 0:00.00 (swapper) 1 ?? Is 0:00.03 /sbin/init -- 2 ?? DL 0:00.00 (pagedaemon) 3 ?? DL 0:00.00 (vmdaemon) 4 ?? DL 0:00.10 (update) 79 ?? Rs 12:57.39 syslogd 90 ?? Is 0:00.00 portmap 111 ?? Is 0:00.14 inetd 113 ?? Is 0:00.04 cron 151 ?? I 0:00.03 /usr/libexec/getty Pc ttyv0 160 ?? Ss 0:00.11 rlogind 161 p0 Ss 0:00.14 -csh (csh) 171 p0 R+ 0:00.01 ps -wax alisocreek: [3] alisocreek: [8] dmesg Copyright (c) 1992-1996 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 2.2-BETA_A #0: Sun Feb 2 15:15:41 PST 1997 root@alisocreek.beach.net:/usr/src/sys/compile/BEACH Calibrating clock(s) relative to mc146818A clock ... i586 clock: 74695554 Hz, i8254 clock: 1193055 Hz CPU: AMD Unknown (74.70-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x500 real memory = 8388608 (8192K bytes) avail memory = 6938624 (6776K bytes) Probing for devices on PCI bus 0: chip0 <generic PCI bridge (vendor=8086 device=7030 subclass=0)> rev 2 on pci0:0 chip1 <Intel 82371SB PCI-ISA bridge> rev 1 on pci0:7:0 chip2 <Intel 82371SB IDE interface> rev 0 on pci0:7:1 ed2 <NE2000 PCI Ethernet (RealTek 8029)> rev 0 int a irq 11 on pci0:17 ed2: address 00:40:05:33:cc:da, type NE2000 (16 bit) ed3 <NE2000 PCI Ethernet (RealTek 8029)> rev 0 int a irq 10 on pci0:19 ed3: address 00:40:05:3c:9e:24, type NE2000 (16 bit) ed4 <NE2000 PCI Ethernet (RealTek 8029)> rev 0 int a irq 9 on pci0:20 ed4: address 00:40:05:3c:9e:28, type NE2000 (16 bit) Probing for devices on the ISA bus: sc0: disabled, not probed. ed0 not found at 0x280 ed1 not found at 0x300 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): <FUJITSU M1636TAU> wd0: 1225MB (2509920 sectors), 2490 cyls, 16 heads, 63 S/T, 512 B/S scd0 not found at 0x230 npx0 on motherboard npx0: INT 16 interface ed3: device timeout alisocreek: [9]
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.UW2.3.95.970202164445.3403C-100000>