Date: Sat, 24 Oct 2015 20:23:24 +0200 From: Ruediger Gad <r.c.g@gmx.de> To: =?UTF-8?Q?Jean-S=c3=a9bastien_P=c3=a9dron?= <dumbbell@FreeBSD.org>, "freebsd-x11@freebsd.org" <freebsd-x11@FreeBSD.org> Subject: Re: Testing the new i915 driver (rev. 3820047) Message-ID: <562BCC9C.2090500@gmx.de> In-Reply-To: <56236843.3020409@gmx.de> References: <56224C70.8040906@FreeBSD.org> <56229E63.7060209@gmx.de> <5622A3BD.6080802@gmx.de> <562363CB.9040707@gmx.de> <562366E4.6010807@gmx.de> <56236843.3020409@gmx.de>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] Hi, I continued my experiments on attempting to find a solution for the problem that the internal laptop screen stays black while external screens seem to work without problems. I have the impression that the system properly recognizes the internal screen but for some reason it is "just" turned off. E.g., in X11, changing the resolution, orientation, etc. of the internal screen affects the external screen as can be expected, which can be, e.g., observed in the placement of the toolbar or windows etc. While I tried to dig through the code and also changed some things in different places, I was out of luck so far. All my attempts are mostly based on reading the dmesg output, trying to understand what could be wrong, and (unfortunately) a lot of wild guessing as I am not really experienced with graphics driver programming. Any hints/pointers of where to look more thoroughly are highly appreciated. In addition, dmesg and Xorg logs of working laptop configurations will be helpful. Especially of laptops for which the internal display is detected as eDP-x. I attached dmesg and Xorg logs of my system for configurations with a) just the internal display being used (took these logs blindfolded) b) the internal and an external (via HDMI) display being connected. Thanks again for all the efforts on this and best regards, Ruediger On 18.10.2015 11:37, Ruediger Gad wrote: > The problem seems to be the file name. > Trying once more with a different file name. > In addition, to avoid further noise, I also put the log on pastebin: > http://pastebin.com/XqS8zwyZ > > > > > On 18.10.2015 11:31, Ruediger Gad wrote: >> PPS: >> Sorry, the second attachment got removed again. >> Trying once more to send the Xorg.log. >> Does the list only allow one attachment per e-mail? >> >> >> >> >> On 18.10.2015 11:18, Ruediger Gad wrote: >>> PS: >>> Please excuse the noise. >>> Just another update: >>> Thanks to the hint of Arto, I tried once more with external screens >>> attached to all outputs (VGA & HDMI). >>> >>> After kldload i915kms, the internal display turns off and the external >>> screens turn on. >>> In the console, I can see some red stripes at the top similar to what >>> Rob mentioned. >>> Starting X works and I can see the output on the external screens but >>> the internal screen remains black. >>> I can also change the resolution etc. via xrandr but, so far, I did not >>> manage to turn the internal display on. >>> >>> Attached, I send a the Xorg.log and another dmesg output that was taken >>> while running X. >>> >>> Again, thanks a lot for the work. >>> >>> >>> >>> BR, >>> >>> Ruediger >>> >>> >>> >>> >>> On 17.10.2015 21:38, Ruediger Gad wrote: >>>> Sorry, the second attachment got somehow removed. >>>> I'm giving it another try as "dmesg.sc.out". >>>> >>>> >>>> >>>> >>>> On 17.10.2015 21:15, Ruediger Gad wrote: >>>>> Hi, >>>>> >>>>> thank you very much for your work on this. >>>>> >>>>> I tried the latest version as of today (commit >>>>> 382004782ca4960f1e25a890e8df21507ba9eb4f). >>>>> Unfortunately, it does not seem to work as I only get a black screen on >>>>> the console. >>>>> >>>>> I tried with both kern.vty="vt" and kern.vty="sc". >>>>> Attached, I send the corresponding dmesg output for vt (dmesg.out) and >>>>> sc (dmesg.out.sc). >>>>> My system is a laptop with an i7-4710MQ CPU and a 2560x1440 display. >>>>> I hope the dmesg out is helpful. >>>>> >>>>> Again, thank you very very much for working on this. >>>>> >>>>> >>>>> >>>>> BR, >>>>> >>>>> Ruediger >>>>> >>>>> >>>>> >>>>> >>>>> On 17.10.2015 15:26, Jean-Sébastien Pédron wrote: >>>>>> Hi! >>>>>> >>>>>> Lately, I fixed several issues with the GEM, people already reported >>>>>> this improved things for them. >>>>>> >>>>>> I believe I fixed two problems with the output connectors too and I hope >>>>>> that it will be fine now for people who reported eg. non-working HDMI. >>>>>> However, I can't test this myself. >>>>>> >>>>>> I'm still chasing a problem with Mesa (Stellarium hangs on startup for me). >>>>>> >>>>>> As a reminder, informations are available on the wiki: >>>>>> https://wiki.freebsd.org/Graphics/Update%20i915%20GPU%20driver%20to%20Linux%203.8 >>>>>> >>>>>> Please continue to test! Thank you for your help :) >>>>>> >>>>> >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> freebsd-x11@freebsd.org mailing list >>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-x11 >>>>> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org" >>>>> >>>> >>>> >>>> >>>> >>>> _______________________________________________ >>>> freebsd-x11@freebsd.org mailing list >>>> https://lists.freebsd.org/mailman/listinfo/freebsd-x11 >>>> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org" >>>> >>> >>> >>> >>> >>> _______________________________________________ >>> freebsd-x11@freebsd.org mailing list >>> https://lists.freebsd.org/mailman/listinfo/freebsd-x11 >>> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org" >>> >> >> > > -- http://ruedigergad.com [-- Attachment #2 --] Copyright (c) 1992-2015 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.0-CURRENT #12 6496462(drm-i915-update-38)-dirty: Sat Oct 24 13:22:14 CEST 2015 root@colin:/usr/obj/usr/home/rc/freebsd_source/freebsd-base-graphics/sys/MYCONFIG amd64 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 WARNING: WITNESS option enabled, expect reduced performance. VT(vga): resolution 640x480 CPU: Intel(R) Core(TM) i7-4710MQ CPU @ 2.50GHz (2494.27-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7fdafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x21<LAHF,ABM> Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 17983078400 (17150 MB) avail memory = 16508624896 (15743 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 cpu4 (AP): APIC ID: 4 cpu5 (AP): APIC ID: 5 cpu6 (AP): APIC ID: 6 cpu7 (AP): APIC ID: 7 ioapic0 <Version 2.0> irqs 0-23 on motherboard random: entropy device external interface module_register_init: MOD_LOAD (vesa, 0xffffffff80745040, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" kbd1 at kbdmux0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <ALASKA A M I> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 cpu4: <ACPI CPU> on acpi0 cpu5: <ACPI CPU> on acpi0 cpu6: <ACPI CPU> on acpi0 cpu7: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 16 at device 0.0 on pci1 vgapci1: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7400000-0xf77fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 agp0: <Haswell GT2 mobile> on vgapci1 agp0: aperture size is 256M, detected 32764k stolen memory vgapci1: Boot video device pci0: <multimedia, HDA> at device 3.0 (no driver attached) xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7a00000-0xf7a0ffff irq 16 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 pci0: <simple comms> at device 22.0 (no driver attached) ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7a1c000-0xf7a1c3ff irq 16 at device 26.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 pci0: <multimedia, HDA> at device 27.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pci3: <ACPI PCI bus> on pcib3 pci3: <network> at device 0.0 (no driver attached) pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci4: <ACPI PCI bus> on pcib4 pci4: <unknown> at device 0.0 (no driver attached) re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf7814000-0xf7814fff,0xf7810000-0xf7813fff irq 19 at device 0.1 on pci4 re0: Using 1 MSI-X message re0: ASPM disabled re0: Chip rev. 0x5c800000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: 80:fa:5b:07:fc:3d ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7a1b000-0xf7a1b3ff irq 23 at device 29.0 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci1 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7a1a000-0xf7a1a7ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Synaptics Touchpad, device ID 0 orm0: <ISA Option ROM> at iomem 0xcf000-0xcffff on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 est2: <Enhanced SpeedStep Frequency Control> on cpu2 p4tcc2: <CPU Frequency Thermal Control> on cpu2 est3: <Enhanced SpeedStep Frequency Control> on cpu3 p4tcc3: <CPU Frequency Thermal Control> on cpu3 est4: <Enhanced SpeedStep Frequency Control> on cpu4 p4tcc4: <CPU Frequency Thermal Control> on cpu4 est5: <Enhanced SpeedStep Frequency Control> on cpu5 p4tcc5: <CPU Frequency Thermal Control> on cpu5 est6: <Enhanced SpeedStep Frequency Control> on cpu6 p4tcc6: <CPU Frequency Thermal Control> on cpu6 est7: <Enhanced SpeedStep Frequency Control> on cpu7 p4tcc7: <CPU Frequency Thermal Control> on cpu7 usbus0: 5.0Gbps Super Speed USB v3.0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec usbus1: 480Mbps High Speed USB v2.0 usbus2: 480Mbps High Speed USB v2.0 ugen0.1: <0x8086> at usbus0 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ada0 at ahcich4 bus 0 scbus0 target 0 lun 0 ada0: <WDC WD5000LPVX-00V0TT0 01.01A01> ACS-2 ATA SATA 3.x device ada0: Serial Number WD-WX61A25C78LL ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 476940MB (976773168 512 byte sectors) ada1 at ahcich5 bus 0 scbus1 target 0 lun 0 ada1: <Samsung SSD 840 EVO 250GB mSATA EXT41B6Q> ACS-2 ATA SATA 3.x device ada1: Serial Number S1KPNSAF502033T ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada1: Command Queueing enabled ada1: 238475MB (488397168 512 byte sectors) ada1: quirks=0x1<4K> SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #6 Launched! SMP: AP CPU #5 Launched! SMP: AP CPU #7 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #4 Launched! Timecounter "TSC-low" frequency 1247137031 Hz quality 1000 WARNING: WITNESS option enabled, expect reduced performance. Root mount waiting for: usbus2 usbus1 usbus0 uhub2: 2 ports with 2 removable, self powered random: unblocking device. uhub1: 2 ports with 2 removable, self powered uhub0: 21 ports with 21 removable, self powered Root mount waiting for: usbus2 usbus1 usbus0 ugen0.2: <vendor 0x1a40> at usbus0 uhub3: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 1> on usbus0 ugen2.2: <vendor 0x8087> at usbus2 uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2 ugen1.2: <vendor 0x8087> at usbus1 uhub5: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 uhub5: 6 ports with 6 removable, self powered uhub4: 8 ports with 8 removable, self powered uhub3: 4 ports with 4 removable, self powered ugen0.3: <Logitech> at usbus0 ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 2> on usbus0 kbd2 at ukbd0 Root mount waiting for: usbus0 ugen0.4: <CHESEN> at usbus0 ukbd1: <CHESEN PS2 to USB Converter, class 0/0, rev 1.10/0.10, addr 3> on usbus0 kbd3 at ukbd1 Root mount waiting for: usbus0 ugen0.5: <Sierra Wireless, Incorporated> at usbus0 Trying to mount root from zfs:root []... siba_bwn0: <Broadcom BCM4312 802.11b/g Wireless> mem 0xf7900000-0xf7903fff irq 18 at device 0.0 on pci3 bwn0 on siba_bwn0 bwn0: WLAN (chipid 0x4312 rev 15) PHY (analog 6 type 5 rev 1) RADIO (manuf 0x17f ver 0x2062 rev 2) bwn0: DMA (64 bits) bwn0: Using 1 MSI messages re0: link state changed to DOWN ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 2> on usbus0 ums0: 16 buttons and [XYZT] coordinates ID=2 uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 2> on usbus0 ums1: <CHESEN PS2 to USB Converter, class 0/0, rev 1.10/0.10, addr 3> on usbus0 ums1: 5 buttons and [XYZ] coordinates ID=1 u3g0: <Data Interface> on usbus0 u3g0: Found 3 ports. info: [drm] Initialized drm 1.1.0 20060810 [drm:pid804:drm_probe_helper] drmn1 desc: Intel Haswell (GT2 mobile) drmn1: <Intel Haswell (GT2 mobile)> on vgapci1 [drm:pid804:drm_get_pci_dev] [drm:pid804:drm_ctxbitmap_next] bit : 0 [drm:pid804:drm_ctxbitmap_init] drm_ctxbitmap_init : 0 [drm:pid804:drm_get_minor] [drm:pid804:drm_get_minor] new minor assigned 65 [drm:pid804:drm_get_minor] [drm:pid804:drm_get_minor] new minor assigned 1 [drm:KMS:pid804:i915_dump_device_info] i915 device info: gen=7, pciid=0x0416 flags=is_mobile,need_gfx_hws,is_haswell,has_force_wake,has_hotplug,has_bsd_ring,has_blt_ring,has_llc,info: [drm] Memory usable by graphics device = 2048M [drm:KMS:pid804:i915_gem_gtt_init] GMADR size = 256M [drm:KMS:pid804:i915_gem_gtt_init] GTT stolen size = 0M [drm:pid804:drm_addmap_core] offset = 0xf7400000, size = 0x00200000, type = 1 info: [drm] MTRR allocation failed. Graphics performance may suffer. [drm:KMS:pid804:intel_detect_pch] Found LynxPoint PCH iicbus0: <Philips I2C bus>error: [drm:pid804:i915_write32] *ERROR* Unknown unclaimed register before writing to c5100 on iicbb0 addr 0xff iic0: <I2C generic I/O> on iicbus0 iic1: <I2C generic I/O> on iicbus1 iicbus2: <Philips I2C bus> on iicbb1 addr 0x0 iic2: <I2C generic I/O> on iicbus2 iic3: <I2C generic I/O> on iicbus3 iicbus4: <Philips I2C bus> on iicbb2 addr 0x0 iic4: <I2C generic I/O> on iicbus4 iic5: <I2C generic I/O> on iicbus5 iicbus6: <Philips I2C bus> on iicbb3 addr 0x0 iic6: <I2C generic I/O> on iicbus6 iic7: <I2C generic I/O> on iicbus7 iicbus8: <Philips I2C bus> on iicbb4 addr 0x0 iic8: <I2C generic I/O> on iicbus8 iic9: <I2C generic I/O> on iicbus9 iicbus10: <Philips I2C bus> on iicbb5 addr 0x0 iic10: <I2C generic I/O> on iicbus10 iic11: <I2C generic I/O> on iicbus11 [drm:pid804:intel_opregion_setup] graphic opregion physical addr: 0xcb795018 [drm:pid804:intel_opregion_setup] Public ACPI methods supported [drm:pid804:intel_opregion_setup] SWSCI supported [drm:pid804:intel_opregion_setup] ASLE supported [drm:pid804:drm_pci_enable_msi] MSI count = 1 info: [drm] MSI enabled 1 message(s) info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). info: [drm] Driver supports precise vblank timestamp query. [drm:KMS:pid804:init_vbt_defaults] Set default to SSC at 100MHz [drm:KMS:pid804:intel_parse_bios] Using VBT from OpRegion: $VBT HASWELL d [drm:KMS:pid804:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120 display_clock_mode 0 fdi_rx_polarity_inverted 0 [drm:KMS:pid804:parse_general_definitions] crt_ddc_bus_pin: 0 [drm:KMS:pid804:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [drm:KMS:pid804:drm_mode_debug_printmodeline] Modeline 0:"2560x1440" 0 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x8 0xa [drm:KMS:pid804:parse_lfp_panel_data] VBT initial LVDS value 30033c [drm:KMS:pid804:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables: [drm:KMS:pid804:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [drm:KMS:pid804:parse_sdvo_device_mapping] No SDVO device info is found in VBT [drm:KMS:pid804:intel_modeset_init] 3 display pipes available. [drm:KMS:pid804:intel_ddi_pll_init] CDCLK running at 540MHz [drm:KMS:pid804:intel_pch_pll_init] No PCH PLLs on this hardware, skipping initialisation [drm:KMS:pid804:intel_lvds_init] LVDS is not present in VBT [drm:KMS:pid804:intel_dp_init_panel_power_sequencer] cur t1_t3 3000 t8 0 t9 3808 t10 500 t11_t12 6000 [drm:KMS:pid804:intel_dp_init_panel_power_sequencer] vbt t1_t3 3000 t8 10 t9 12000 t10 500 t11_t12 5000 [drm:KMS:pid804:intel_dp_init_panel_power_sequencer] panel power up delay 300, power down delay 50, power cycle delay 600 [drm:KMS:pid804:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 1200 [drm:KMS:pid804:intel_dp_i2c_init] i2c_init DPDDC-A [drm:KMS:pid804:ironlake_edp_panel_vdd_on] Turn eDP VDD on [drm:KMS:pid804:ironlake_edp_panel_vdd_on] PCH_PP_STATUS: 0x80000008 PCH_PP_CONTROL: 0xabcd000f [drm:KMS:pid804:intel_dp_i2c_aux_ch] aux_i2c nack [drm:KMS:pid804:intel_dp_i2c_aux_ch] aux_i2c nack [drm:KMS:pid804:ironlake_edp_panel_vdd_off] Turn eDP VDD off 1 [drm:KMS:pid804:ironlake_edp_panel_vdd_on] Turn eDP VDD on [drm:KMS:pid804:ironlake_edp_panel_vdd_on] eDP VDD already on [drm:KMS:pid804:ironlake_edp_panel_vdd_off] Turn eDP VDD off 1 [drm:KMS:pid804:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0xbb8000a, PP_OFF 0x1f40ee0, PP_DIV 0x186906 [drm:KMS:pid804:ironlake_edp_panel_vdd_on] Turn eDP VDD on [drm:KMS:pid804:ironlake_edp_panel_vdd_on] eDP VDD already on [drm:KMS:pid804:iic_dp_aux_xfer] dp_aux_xfer return 0 [drm:KMS:pid804:iic_dp_aux_xfer] dp_aux_xfer return 0 [drm:KMS:pid804:drm_edid_to_eld] ELD: no CEA Extension found [drm:KMS:pid804:ironlake_edp_panel_vdd_off] Turn eDP VDD off 1 [drm:KMS:pid804:intel_panel_get_backlight] get backlight PWM = 5273 [drm:KMS:pid804:intel_dp_i2c_init] i2c_init DPDDC-C [drm:KMS:pid804:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f [drm:KMS:pid804:intel_dp_i2c_aux_ch] aux_ch failed -60 [drm:KMS:pid804:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f [drm:KMS:pid804:intel_dp_i2c_aux_ch] aux_ch failed -60 [drm:KMS:pid804:intel_dp_i2c_init] i2c_init DPDDC-D [drm:KMS:pid804:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f [drm:KMS:pid804:intel_dp_i2c_aux_ch] aux_ch failed -60 [drm:KMS:pid804:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f [drm:KMS:pid804:intel_dp_i2c_aux_ch] aux_ch failed -60 drmn1: taking over the fictitious range 0xd0000000-0xe0000000 [drm:KMS:pid804:init_status_page] render ring hws offset: 0x00000000 [drm:KMS:pid804:init_status_page] bsd ring hws offset: 0x00022000 [drm:KMS:pid804:init_status_page] blitter ring hws offset: 0x00043000 [drm:KMS:pid804:create_default_context] Default HW context loaded [drm:KMS:pid804:i915_gem_context_init] HW context support initialized [drm:KMS:pid804:intel_prepare_ddi_buffers] Initializing DDI buffers for port A in DP mode [drm:KMS:pid804:intel_prepare_ddi_buffers] Initializing DDI buffers for port B in DP mode [drm:KMS:pid804:intel_prepare_ddi_buffers] Initializing DDI buffers for port C in DP mode [drm:KMS:pid804:intel_prepare_ddi_buffers] Initializing DDI buffers for port D in DP mode [drm:KMS:pid804:intel_prepare_ddi_buffers] Initializing DDI buffers for port E in FDI mode [drm:KMS:pid804:intel_modeset_setup_hw_state] Pipe A using transcoder EDP [drm:KMS:pid804:intel_modeset_setup_hw_state] [CRTC:3] hw state readout: enabled [drm:KMS:pid804:intel_modeset_setup_hw_state] [CRTC:5] hw state readout: disabled [drm:KMS:pid804:intel_modeset_setup_hw_state] [CRTC:7] hw state readout: disabled [drm:KMS:pid804:intel_ddi_get_crtc_pll] Pipe A connected to port A using clock 0x20000000 [drm:KMS:pid804:intel_modeset_setup_hw_state] [ENCODER:9:TMDS-9] hw state readout: enabled, pipe=0 [drm:KMS:pid804:intel_modeset_setup_hw_state] [ENCODER:17:TMDS-17] hw state readout: disabled, pipe=0 [drm:KMS:pid804:intel_modeset_setup_hw_state] [ENCODER:20:TMDS-20] hw state readout: disabled, pipe=0 [drm:KMS:pid804:intel_modeset_setup_hw_state] [CONNECTOR:10:eDP-1] hw state readout: enabled [drm:KMS:pid804:intel_modeset_setup_hw_state] [CONNECTOR:18:HDMI-A-1] hw state readout: disabled [drm:KMS:pid804:intel_modeset_setup_hw_state] [CONNECTOR:19:DP-1] hw state readout: disabled [drm:KMS:pid804:intel_modeset_setup_hw_state] [CONNECTOR:21:HDMI-A-2] hw state readout: disabled [drm:KMS:pid804:intel_modeset_setup_hw_state] [CONNECTOR:22:DP-2] hw state readout: disabled [drm:KMS:pid804:intel_connector_check_state] [CONNECTOR:10:eDP-1] [drm:KMS:pid804:intel_modeset_check_state] [ENCODER:9:TMDS-9] [drm:KMS:pid804:intel_modeset_check_state] [ENCODER:17:TMDS-17] [drm:KMS:pid804:intel_modeset_check_state] [ENCODER:20:TMDS-20] [drm:KMS:pid804:intel_modeset_check_state] [CRTC:3] [drm:KMS:pid804:intel_modeset_check_state] [CRTC:5] [drm:KMS:pid804:intel_modeset_check_state] [CRTC:7] [drm:pid804:drm_irq_install] irq=268 info: [drm] Connector eDP-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.eDP-1 info: [drm] - kern.vt.fb.default_mode [drm:KMS:pid804:drm_fb_helper_parse_command_line] cmdline mode for connector eDP-1 1024x768@60Hz info: [drm] Connector HDMI-A-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.HDMI-A-1 info: [drm] - kern.vt.fb.default_mode [drm:KMS:pid804:drm_fb_helper_parse_command_line] cmdline mode for connector HDMI-A-1 1024x768@60Hz info: [drm] Connector DP-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.DP-1 info: [drm] - kern.vt.fb.default_mode [drm:KMS:pid804:drm_fb_helper_parse_command_line] cmdline mode for connector DP-1 1024x768@60Hz info: [drm] Connector HDMI-A-2: get mode from tunables: info: [drm] - kern.vt.fb.modes.HDMI-A-2 info: [drm] - kern.vt.fb.default_mode [drm:KMS:pid804:drm_fb_helper_parse_command_line] cmdline mode for connector HDMI-A-2 1024x768@60Hz info: [drm] Connector DP-2: get mode from tunables: info: [drm] - kern.vt.fb.modes.DP-2 info: [drm] - kern.vt.fb.default_mode [drm:KMS:pid804:drm_fb_helper_parse_command_line] cmdline mode for connector DP-2 1024x768@60Hz [drm:KMS:pid804:drm_helper_probe_single_connector_modes] [CONNECTOR:10:eDP-1] [drm:KMS:pid804:intel_dp_detect] DPCD: 12 0A FF 40 01 00 00 00 02 00 00 00 10 0B 01 [drm:KMS:pid804:drm_edid_to_eld] ELD: no CEA Extension found [drm:KMS:pid804:drm_helper_probe_single_connector_modes] [CONNECTOR:10:eDP-1] probed modes : [drm:KMS:pid804:drm_mode_debug_printmodeline] Modeline 23:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x48 0xa [drm:KMS:pid804:drm_helper_probe_single_connector_modes] [CONNECTOR:18:HDMI-A-1] [drm:KMS:pid804:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [drm:KMS:pid804:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6 [drm:KMS:pid804:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [drm:KMS:pid804:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6 [drm:KMS:pid804:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [drm:KMS:pid804:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6 [drm:KMS:pid804:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [drm:KMS:pid804:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6 [drm:KMS:pid804:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [drm:KMS:pid804:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6 [drm:KMS:pid804:drm_helper_probe_single_connector_modes] [CONNECTOR:18:HDMI-A-1] disconnected [drm:KMS:pid804:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DP-1] [drm:KMS:pid804:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f [drm:KMS:pid804:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f [drm:KMS:pid804:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f [drm:KMS:pid804:intel_dp_detect] DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [drm:KMS:pid804:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DP-1] disconnected [drm:KMS:pid804:drm_helper_probe_single_connector_modes] [CONNECTOR:21:HDMI-A-2] [drm:KMS:pid804:drm_detect_monitor_audio] Monitor has basic audio support [drm:KMS:pid804:drm_edid_to_eld] ELD monitor SyncMaster [drm:KMS:pid804:parse_hdmi_vsdb] HDMI: DVI dual 0, max TMDS clock 225, latency present 0 0, video latency 0 0, audio latency 0 0 [drm:KMS:pid804:drm_edid_to_eld] ELD size 9, SAD count 1 [drm:KMS:pid804:drm_helper_probe_single_connector_modes] [CONNECTOR:21:HDMI-A-2] probed modes : [drm:KMS:pid804:drm_mode_debug_printmodeline] Modeline 24:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [drm:KMS:pid804:drm_mode_debug_printmodeline] Modeline 33:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [drm:KMS:pid804:drm_mode_debug_printmodeline] Modeline 34:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 [drm:KMS:pid804:drm_mode_debug_printmodeline] Modeline 26:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [drm:KMS:pid804:drm_mode_debug_printmodeline] Modeline 27:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [drm:KMS:pid804:drm_mode_debug_printmodeline] Modeline 28:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 [drm:KMS:pid804:drm_mode_debug_printmodeline] Modeline 35:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 [drm:KMS:pid804:drm_mode_debug_printmodeline] Modeline 36:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 [drm:KMS:pid804:drm_mode_debug_printmodeline] Modeline 32:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [drm:KMS:pid804:drm_mode_debug_printmodeline] Modeline 29:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [drm:KMS:pid804:drm_mode_debug_printmodeline] Modeline 30:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [drm:KMS:pid804:drm_mode_debug_printmodeline] Modeline 39:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa [drm:KMS:pid804:drm_mode_debug_printmodeline] Modeline 31:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [drm:KMS:pid804:drm_mode_debug_printmodeline] Modeline 37:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa [drm:KMS:pid804:drm_helper_probe_single_connector_modes] [CONNECTOR:22:DP-2] [drm:KMS:pid804:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f [drm:KMS:pid804:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f [drm:KMS:pid804:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f [drm:KMS:pid804:intel_dp_detect] DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [drm:KMS:pid804:drm_helper_probe_single_connector_modes] [CONNECTOR:22:DP-2] disconnected [drm:KMS:pid804:drm_setup_crtcs] [drm:KMS:pid804:drm_enable_connectors] connector 10 enabled? yes [drm:KMS:pid804:drm_enable_connectors] connector 18 enabled? no [drm:KMS:pid804:drm_enable_connectors] connector 19 enabled? no [drm:KMS:pid804:drm_enable_connectors] connector 21 enabled? yes [drm:KMS:pid804:drm_enable_connectors] connector 22 enabled? no [drm:KMS:pid804:drm_target_preferred] looking for cmdline mode on connector 10 [drm:KMS:pid804:drm_target_preferred] found mode 1024x768 [drm:KMS:pid804:drm_target_preferred] looking for cmdline mode on connector 21 [drm:KMS:pid804:drm_target_preferred] found mode 1024x768 [drm:KMS:pid804:drm_setup_crtcs] picking CRTCs for 8192x8192 config [drm:KMS:pid804:drm_setup_crtcs] desired mode 1024x768 set on crtc 3 [drm:KMS:pid804:drm_setup_crtcs] desired mode 1024x768 set on crtc 5 [drm:KMS:pid804:intelfb_create] allocated 1024x768 (s 24bits) fb: 0x00073000, bo 0xfffff8005eb42800 fbd1 on drmn1 VT: Replacing driver "vga" with new "fb". [drm:KMS:pid0:intel_crtc_set_config] [CRTC:3] [FB:41] #connectors=1 (x y) (0 0) [drm:KMS:pid0:intel_set_config_compute_mode_changes] crtc has no fb, full mode set [drm:KMS:pid0:intel_set_config_compute_mode_changes] modes are different, full mode set [drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 38:"1024x768" 0 64127 1024 1080 1184 1344 768 769 772 795 0x0 0x6 [drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:10:eDP-1] to [CRTC:3] [drm:KMS:pid0:intel_crtc_set_config] attempting to set mode from userspace [drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 38:"1024x768" 0 64127 1024 1080 1184 1344 768 769 772 795 0x0 0x6 [drm:KMS:pid0:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [drm:KMS:pid0:intel_dp_mode_fixup] DP link computation with max lane count 4 max bw 0a pixel clock 241500KHz [drm:KMS:pid0:intel_dp_mode_fixup] DP link bw 0a lane count 4 clock 241500 bpp 24 [drm:KMS:pid0:intel_dp_mode_fixup] DP link bw required 579600 available 864000 [drm:KMS:pid0:intel_modeset_adjusted_mode] [CRTC:3] [drm:KMS:pid0:intel_panel_actually_set_backlight] set backlight PWM = 0 [drm:KMS:pid0:ironlake_edp_backlight_off] info: [drm] Initialized i915 1.6.0 20080730 for drmn1 on minor 1 [drm:KMS:pid0:intel_enable_rc6] Haswell: only RC6 available info: [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [drm:pid0:drm_calc_vbltimestamp_from_scanoutpos] crtc 0: Noop due to uninitialized mode. [drm:KMS:pid0:ironlake_edp_panel_vdd_on] Turn eDP VDD on [drm:KMS:pid0:ironlake_edp_panel_vdd_on] eDP VDD already on [drm:KMS:pid0:ironlake_edp_panel_off] Turn eDP power off [drm:KMS:pid0:ironlake_wait_panel_off] Wait for panel power off time [drm:KMS:pid0:ironlake_wait_panel_status] mask b000000f value 00000000 status 80000008 control abcd0000 [drm:pid0:drm_vblank_get] enabling vblank on crtc 0, ret: -22 [drm:KMS:pid0:intel_choose_pipe_bpp_dither] clamping display bpc (was -1) to EDID reported max of 8 [drm:KMS:pid0:intel_choose_pipe_bpp_dither] setting pipe bpc to 8 (max display bpc 8) [drm:KMS:pid0:haswell_crtc_mode_set] Mode for pipe 0: [drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 38:"1024x768" 0 64127 1024 1080 1184 1344 768 769 772 795 0x0 0x6 [drm:KMS:pid0:ironlake_update_plane] Writing base 00073000 00000000 0 0 4096 [drm:KMS:pid0:intel_crtc_mode_set] [ENCODER:9:TMDS-9] set [MODE:38:1024x768] [drm:KMS:pid0:intel_ddi_mode_set] Preparing DDI mode for Haswell on port A, pipe A [drm:KMS:pid0:sandybridge_update_wm] FIFO watermarks For pipe A - plane 8, cursor: 6 [drm:KMS:pid0:ironlake_edp_panel_vdd_on] Turn eDP VDD on [drm:KMS:pid0:ironlake_wait_panel_power_cycle] Wait for panel power cycle [drm:KMS:pid0:ironlake_wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [drm:KMS:pid0:ironlake_edp_panel_vdd_on] PCH_PP_STATUS: 0x00000000 PCH_PP_CONTROL: 0xabcd0008 [drm:KMS:pid0:ironlake_edp_panel_vdd_on] eDP was not running [drm:KMS:pid0:ironlake_edp_panel_on] Turn eDP power on [drm:KMS:pid0:ironlake_wait_panel_power_cycle] Wait for panel power cycle [drm:KMS:pid0:ironlake_wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008 [drm:KMS:pid0:ironlake_wait_panel_on] Wait for panel power on [drm:KMS:pid0:ironlake_wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b [drm:KMS:pid0:ironlake_edp_panel_vdd_off] Turn eDP VDD off 1 [drm:KMS:pid0:ironlake_panel_vdd_off_sync] PCH_PP_STATUS: 0x80000008 PCH_PP_CONTROL: 0xabcd0003 [drm:KMS:pid0:intel_dp_start_link_train] training pattern 1 signal levels 00000000 [drm:KMS:pid0:intel_dp_start_link_train] clock recovery OK [drm:KMS:pid0:intel_dp_complete_link_train] Channel EQ done. DP Training successfull error: [drm:pid0:intel_dp_set_link_train] *ERROR* Timed out waiting for DP idle patterns error: [drm:pid0:i915_write32] *ERROR* Unknown unclaimed register before writing to 64040 [drm:KMS:pid0:ironlake_edp_backlight_on] [drm:KMS:pid0:intel_panel_actually_set_backlight] set backlight PWM = 5273 [drm:pid0:drm_calc_timestamping_constants] crtc 3: hwmode: htotal 2720, vtotal 1481, vdisplay 1440 [drm:pid0:drm_calc_timestamping_constants] crtc 3: clock 241500 kHz framedur 16679022 linedur 11262, pixeldur 4 [drm:KMS:pid0:intel_connector_check_state] [CONNECTOR:10:eDP-1] [drm:KMS:pid0:intel_modeset_check_state] [ENCODER:9:TMDS-9] [drm:KMS:pid0:intel_modeset_check_state] [ENCODER:17:TMDS-17] [drm:KMS:pid0:intel_modeset_check_state] [ENCODER:20:TMDS-20] [drm:KMS:pid0:intel_modeset_check_state] [CRTC:3] [drm:KMS:pid0:intel_modeset_check_state] [CRTC:5] [drm:KMS:pid0:intel_modeset_check_state] [CRTC:7] [drm:KMS:pid0:intel_crtc_set_config] [CRTC:5] [FB:41] #connectors=1 (x y) (0 0) [drm:KMS:pid0:intel_set_config_compute_mode_changes] crtc has no fb, full mode set [drm:KMS:pid0:intel_set_config_compute_mode_changes] modes are different, full mode set [drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 40:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [drm:KMS:pid0:intel_modeset_stage_output_state] encoder changed, full mode switch [drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:10:eDP-1] to [CRTC:3] [drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-2] to [CRTC:5] [drm:KMS:pid0:intel_modeset_stage_output_state] crtc changed, full mode switch [drm:KMS:pid0:intel_crtc_set_config] attempting to set mode from userspace [drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 40:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [drm:KMS:pid0:intel_set_mode] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [drm:KMS:pid0:intel_modeset_adjusted_mode] [CRTC:5] [drm:pid0:drm_vblank_get] enabling vblank on crtc 1, ret: -22 [drm:KMS:pid0:intel_ddi_pll_mode_set] Using WRPLL 1 on pipe B [drm:KMS:pid0:intel_ddi_calculate_wrpll] WRPLL: 65000KHz refresh rate with p=14, n2=32 r2=19 [drm:KMS:pid0:intel_choose_pipe_bpp_dither] forcing bpc to 8 for HDMI [drm:KMS:pid0:intel_choose_pipe_bpp_dither] setting pipe bpc to 8 (max display bpc 8) [drm:KMS:pid0:haswell_crtc_mode_set] Mode for pipe 1: [drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 40:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [drm:KMS:pid0:ironlake_update_plane] Writing base 00073000 00000000 0 0 4096 [drm:KMS:pid0:sandybridge_update_wm] FIFO watermarks For pipe A - plane 8, cursor: 6 [drm:KMS:pid0:intel_crtc_mode_set] [ENCODER:20:TMDS-20] set [MODE:40:1024x768] [drm:KMS:pid0:intel_ddi_mode_set] Preparing DDI mode for Haswell on port D, pipe B [drm:KMS:pid0:intel_ddi_mode_set] HDMI audio on pipe B on DDI [drm:KMS:pid0:intel_ddi_mode_set] HDMI audio: write eld information [drm:KMS:pid0:intel_write_eld] ELD on [CONNECTOR:21:HDMI-A-2], [ENCODER:20:TMDS-20] [drm:KMS:pid0:haswell_write_eld] HDMI: Haswell Audio initialize.... [drm:KMS:pid0:haswell_write_eld] HDMI audio: enable codec [drm:KMS:pid0:ironlake_wait_for_vblank] vblank wait timed out [drm:KMS:pid0:haswell_write_eld] HDMI audio: pin eld vld status=0x 40 [drm:KMS:pid0:haswell_write_eld] HDMI audio: eld vld status=0x 50 [drm:KMS:pid0:haswell_write_eld] HDMI audio: audio conf: 0x 70fa60 [drm:KMS:pid0:haswell_write_eld] ELD on pipe B [drm:KMS:pid0:haswell_write_eld] port num:0 [drm:KMS:pid0:haswell_write_eld] ELD size 9 [drm:KMS:pid0:sandybridge_update_wm] FIFO watermarks For pipe A - plane 8, cursor: 6 [drm:KMS:pid0:sandybridge_update_wm] FIFO watermarks For pipe B - plane 9, cursor: 6 [drm:KMS:pid0:ironlake_wait_for_vblank] vblank wait timed out [drm:KMS:pid0:ironlake_wait_for_vblank] vblank wait timed out [drm:pid0:drm_calc_timestamping_constants] crtc 5: hwmode: htotal 1344, vtotal 806, vdisplay 768 [drm:pid0:drm_calc_timestamping_constants] crtc 5: clock 65000 kHz framedur 16664856 linedur 20676, pixeldur 15 [drm:KMS:pid0:intel_connector_check_state] [CONNECTOR:10:eDP-1] [drm:KMS:pid0:intel_connector_check_state] [CONNECTOR:21:HDMI-A-2] [drm:KMS:pid0:intel_modeset_check_state] [ENCODER:9:TMDS-9] [drm:KMS:pid0:intel_modeset_check_state] [ENCODER:17:TMDS-17] [drm:KMS:pid0:intel_modeset_check_state] [ENCODER:20:TMDS-20] [drm:KMS:pid0:intel_modeset_check_state] [CRTC:3] [drm:KMS:pid0:intel_modeset_check_state] [CRTC:5] [drm:KMS:pid0:intel_modeset_check_state] [CRTC:7] [drm:KMS:pid0:intel_crtc_set_config] [CRTC:7] [NOFB] [drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:10:eDP-1] to [CRTC:3] [drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:21:HDMI-A-2] to [CRTC:5] \000 [-- Attachment #3 --] [ 98.526] X.Org X Server 1.14.7 Release Date: 2014-06-05 [ 98.526] X Protocol Version 11, Revision 0 [ 98.526] Build Operating System: FreeBSD 10.1-RELEASE-p22 amd64 [ 98.527] Current Operating System: FreeBSD colin 11.0-CURRENT FreeBSD 11.0-CURRENT #12 6496462(drm-i915-update-38)-dirty: Sat Oct 24 13:22:14 CEST 2015 root@colin:/usr/obj/usr/home/rc/freebsd_source/freebsd-base-graphics/sys/MYCONFIG amd64 [ 98.527] Build Date: 08 October 2015 03:51:02AM [ 98.527] [ 98.527] Current version of pixman: 0.32.6 [ 98.528] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 98.528] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 98.528] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 24 17:54:12 2015 [ 98.531] (==) Using config directory: "/usr/local/etc/X11/xorg.conf.d" [ 98.532] (==) No Layout section. Using the first Screen section. [ 98.532] (**) |-->Screen "Screen0" (0) [ 98.532] (**) | |-->Monitor "<default monitor>" [ 98.533] (**) | |-->Device "Card0" [ 98.533] (==) No monitor specified for screen "Screen0". Using a default monitor configuration. [ 98.533] (==) Automatically adding devices [ 98.533] (==) Automatically enabling devices [ 98.533] (==) Not automatically adding GPU devices [ 98.548] (==) FontPath set to: /usr/local/share/fonts/misc/, /usr/local/share/fonts/TTF/, /usr/local/share/fonts/OTF/, /usr/local/share/fonts/Type1/, /usr/local/share/fonts/100dpi/, /usr/local/share/fonts/75dpi/ [ 98.548] (==) ModulePath set to "/usr/local/lib/xorg/modules" [ 98.548] (II) The server relies on devd to provide the list of input devices. If no devices become available, reconfigure devd or disable AutoAddDevices. [ 98.548] (II) Loader magic: 0x7f9af0 [ 98.548] (II) Module ABI versions: [ 98.548] X.Org ANSI C Emulation: 0.4 [ 98.548] X.Org Video Driver: 14.1 [ 98.548] X.Org XInput driver : 19.1 [ 98.548] X.Org Server Extension : 7.0 [ 98.549] (--) PCI:*(0:0:2:0) 8086:0416:1558:2300 rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/65536 [ 98.549] (--) PCI: (0:1:0:0) 10de:1392:1558:2300 rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128 [ 98.550] Initializing built-in extension Generic Event Extension [ 98.550] Initializing built-in extension SHAPE [ 98.550] Initializing built-in extension MIT-SHM [ 98.550] Initializing built-in extension XInputExtension [ 98.550] Initializing built-in extension XTEST [ 98.550] Initializing built-in extension BIG-REQUESTS [ 98.550] Initializing built-in extension SYNC [ 98.550] Initializing built-in extension XKEYBOARD [ 98.551] Initializing built-in extension XC-MISC [ 98.551] Initializing built-in extension XINERAMA [ 98.551] Initializing built-in extension XFIXES [ 98.551] Initializing built-in extension RENDER [ 98.551] Initializing built-in extension RANDR [ 98.551] Initializing built-in extension COMPOSITE [ 98.551] Initializing built-in extension DAMAGE [ 98.551] Initializing built-in extension MIT-SCREEN-SAVER [ 98.551] Initializing built-in extension DOUBLE-BUFFER [ 98.552] Initializing built-in extension RECORD [ 98.552] Initializing built-in extension DPMS [ 98.552] Initializing built-in extension X-Resource [ 98.552] Initializing built-in extension XVideo [ 98.552] Initializing built-in extension XVideo-MotionCompensation [ 98.552] Initializing built-in extension XFree86-VidModeExtension [ 98.552] Initializing built-in extension XFree86-DGA [ 98.552] Initializing built-in extension XFree86-DRI [ 98.552] Initializing built-in extension DRI2 [ 98.552] (II) LoadModule: "glx" [ 98.557] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so [ 98.560] (II) Module glx: vendor="X.Org Foundation" [ 98.560] compiled for 1.14.7, module version = 1.0.0 [ 98.561] ABI class: X.Org Server Extension, version 7.0 [ 98.561] (==) AIGLX enabled [ 98.562] Loading extension GLX [ 98.562] (II) LoadModule: "intel" [ 98.563] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so [ 98.570] (II) Module intel: vendor="X.Org Foundation" [ 98.570] compiled for 1.14.7, module version = 2.21.15 [ 98.570] Module class: X.Org Video Driver [ 98.570] ABI class: X.Org Video Driver, version 14.1 [ 98.570] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics, HD Graphics 2000, HD Graphics 3000, HD Graphics 2500, HD Graphics 4000, HD Graphics P4000, HD Graphics 4600, HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100, HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200 [ 98.576] (--) Using syscons driver with X support (version 0.x) [ 98.576] (--) using VT number 9 [ 98.582] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support [ 98.584] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 98.584] (==) intel(0): RGB weight 888 [ 98.585] (==) intel(0): Default visual is TrueColor [ 98.585] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600 [ 98.586] (**) intel(0): Relaxed fencing enabled [ 98.586] (**) intel(0): Wait on SwapBuffers? enabled [ 98.586] (**) intel(0): Triple buffering? enabled [ 98.586] (**) intel(0): Framebuffer tiled [ 98.586] (**) intel(0): Pixmaps tiled [ 98.587] (**) intel(0): 3D buffers tiled [ 98.587] (**) intel(0): SwapBuffers wait enabled [ 98.587] (==) intel(0): video overlay key set to 0x101fe [ 98.588] (II) intel(0): Output eDP1 has no monitor section [ 98.601] (II) intel(0): Output HDMI1 has no monitor section [ 98.620] (II) intel(0): Output DP1 has no monitor section [ 98.698] (II) intel(0): Output HDMI2 has no monitor section [ 98.716] (II) intel(0): Output DP2 has no monitor section [ 98.719] (II) intel(0): EDID for output eDP1 [ 98.719] (II) intel(0): Manufacturer: SHP Model: 13ff Serial#: 0 [ 98.719] (II) intel(0): Year: 2013 Week: 0 [ 98.719] (II) intel(0): EDID Version: 1.4 [ 98.719] (II) intel(0): Digital Display Input [ 98.719] (II) intel(0): 8 bits per channel [ 98.719] (II) intel(0): Digital interface is DisplayPort [ 98.719] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 17 [ 98.720] (II) intel(0): Gamma: 2.20 [ 98.720] (II) intel(0): No DPMS capabilities specified [ 98.720] (II) intel(0): Supported color encodings: RGB 4:4:4 [ 98.720] (II) intel(0): Default color space is primary color space [ 98.720] (II) intel(0): First detailed timing is preferred mode [ 98.720] (II) intel(0): Preferred mode is native pixel format and refresh rate [ 98.720] (II) intel(0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600 [ 98.720] (II) intel(0): blueX: 0.149 blueY: 0.060 whiteX: 0.312 whiteY: 0.328 [ 98.720] (II) intel(0): Manufacturer's mask: 0 [ 98.720] (II) intel(0): Supported detailed timing: [ 98.720] (II) intel(0): clock: 241.5 MHz Image Size: 294 x 165 mm [ 98.721] (II) intel(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0 [ 98.721] (II) intel(0): v_active: 1440 v_sync: 1443 v_sync_end 1448 v_blanking: 1481 v_border: 0 [ 98.721] (II) intel(0): Monitor name: LQ133T1JW02 [ 98.721] (II) intel(0): EDID (in hex): [ 98.721] (II) intel(0): 00ffffffffffff004d10ff1300000000 [ 98.721] (II) intel(0): 00170104a51d117806de50a3544c9926 [ 98.721] (II) intel(0): 0f505400000001010101010101010101 [ 98.721] (II) intel(0): 010101010101565e00a0a0a029503020 [ 98.721] (II) intel(0): 350026a5100000180000001000000000 [ 98.721] (II) intel(0): 00000000000000000000000000100000 [ 98.722] (II) intel(0): 000000000000000000000000000000fc [ 98.722] (II) intel(0): 004c5131333354314a5730320a2000b0 [ 98.722] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 98.722] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 98.722] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 98.722] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 98.722] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 98.722] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 98.722] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 98.723] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 98.723] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 98.723] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 98.723] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 98.723] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 98.723] (II) intel(0): Printing probed modes for output eDP1 [ 98.723] (II) intel(0): Modeline "2560x1440"x60.0 241.50 2560 2608 2640 2720 1440 1443 1448 1481 -hsync -vsync (88.8 kHz UeP) [ 98.723] (II) intel(0): Modeline "1920x1440"x60.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz d) [ 98.723] (II) intel(0): Modeline "1856x1392"x60.0 218.30 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.4 kHz d) [ 98.723] (II) intel(0): Modeline "1792x1344"x60.0 204.80 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.7 kHz d) [ 98.723] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz d) [ 98.724] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d) [ 98.724] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d) [ 98.724] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d) [ 98.724] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 98.724] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 98.724] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 98.724] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 98.734] (II) intel(0): EDID for output HDMI1 [ 98.753] (II) intel(0): EDID for output DP1 [ 98.831] (II) intel(0): EDID for output HDMI2 [ 98.831] (II) intel(0): Manufacturer: SAM Model: 440 Serial#: 1297691188 [ 98.831] (II) intel(0): Year: 2008 Week: 32 [ 98.831] (II) intel(0): EDID Version: 1.3 [ 98.832] (II) intel(0): Digital Display Input [ 98.832] (II) intel(0): Max Image Size [cm]: horiz.: 52 vert.: 32 [ 98.832] (II) intel(0): Gamma: 2.20 [ 98.832] (II) intel(0): DPMS capabilities: Off [ 98.832] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 98.832] (II) intel(0): First detailed timing is preferred mode [ 98.832] (II) intel(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600 [ 98.832] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329 [ 98.832] (II) intel(0): Supported established timings: [ 98.832] (II) intel(0): 640x480@60Hz [ 98.833] (II) intel(0): 800x600@56Hz [ 98.833] (II) intel(0): 800x600@60Hz [ 98.833] (II) intel(0): 1024x768@60Hz [ 98.833] (II) intel(0): Manufacturer's mask: 0 [ 98.833] (II) intel(0): Supported standard timings: [ 98.833] (II) intel(0): #0: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 [ 98.833] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 98.833] (II) intel(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513 [ 98.833] (II) intel(0): Supported detailed timing: [ 98.833] (II) intel(0): clock: 154.0 MHz Image Size: 518 x 324 mm [ 98.833] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 [ 98.834] (II) intel(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0 [ 98.834] (II) intel(0): Ranges: V min: 56 V max: 60 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz [ 98.834] (II) intel(0): Monitor name: SyncMaster [ 98.834] (II) intel(0): Serial No: HMBQ801703 [ 98.834] (II) intel(0): Supported detailed timing: [ 98.834] (II) intel(0): clock: 74.2 MHz Image Size: 16 x 9 mm [ 98.834] (II) intel(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0 [ 98.834] (II) intel(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0 [ 98.835] (II) intel(0): Number of EDID sections to follow: 1 [ 98.835] (II) intel(0): EDID (in hex): [ 98.835] (II) intel(0): 00ffffffffffff004c2d40043432594d [ 98.835] (II) intel(0): 20120103a03420782aee91a3544c9926 [ 98.835] (II) intel(0): 0f5054230800a9408180814001010101 [ 98.835] (II) intel(0): 010101010101283c80a070b023403020 [ 98.835] (II) intel(0): 360006442100001a000000fd00383c1e [ 98.835] (II) intel(0): 5111000a202020202020000000fc0053 [ 98.835] (II) intel(0): 796e634d61737465720a2020000000ff [ 98.835] (II) intel(0): 00484d42513830313730330a2020019c [ 98.836] (II) intel(0): 020323f14b101f841300010203000000 [ 98.836] (II) intel(0): 2309070783010000e2000f67030c0020 [ 98.836] (II) intel(0): 00802d011d007251d01e206e28550010 [ 98.836] (II) intel(0): 090000001e0000000000000000000000 [ 98.836] (II) intel(0): 00000000000000000000000000000000 [ 98.836] (II) intel(0): 00000000000000000000000000000000 [ 98.836] (II) intel(0): 00000000000000000000000000000000 [ 98.836] (II) intel(0): 000000000000000000000000000000cd [ 98.836] (II) intel(0): Printing probed modes for output HDMI2 [ 98.836] (II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP) [ 98.837] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e) [ 98.837] (II) intel(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e) [ 98.837] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 98.837] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 98.837] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 98.837] (II) intel(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 98.837] (II) intel(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e) [ 98.837] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 98.837] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 98.837] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 98.838] (II) intel(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 98.838] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 98.838] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 98.856] (II) intel(0): EDID for output DP2 [ 98.856] (II) intel(0): Output eDP1 connected [ 98.856] (II) intel(0): Output HDMI1 disconnected [ 98.857] (II) intel(0): Output DP1 disconnected [ 98.857] (II) intel(0): Output HDMI2 connected [ 98.857] (II) intel(0): Output DP2 disconnected [ 98.857] (II) intel(0): Using user preference for initial modes [ 98.857] (II) intel(0): Output eDP1 using initial mode 2560x1440 [ 98.857] (II) intel(0): Output HDMI2 using initial mode 1920x1200 [ 98.857] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 98.857] (II) intel(0): Kernel page flipping support detected, enabling [ 98.857] (==) intel(0): DPI set to (96, 96) [ 98.858] (II) Loading sub module "fb" [ 98.858] (II) LoadModule: "fb" [ 98.859] (II) Loading /usr/local/lib/xorg/modules/libfb.so [ 98.862] (II) Module fb: vendor="X.Org Foundation" [ 98.862] compiled for 1.14.7, module version = 1.0.0 [ 98.862] ABI class: X.Org ANSI C Emulation, version 0.4 [ 98.862] (II) Loading sub module "dri2" [ 98.863] (II) LoadModule: "dri2" [ 98.863] (II) Module "dri2" already built-in [ 98.863] (==) Depth 24 pixmap format is 32 bpp [ 98.864] (II) intel(0): [DRI2] Setup complete [ 98.864] (II) intel(0): [DRI2] DRI driver: i965 [ 98.864] (II) intel(0): Allocated new frame buffer 2560x1440 stride 10240, tiled [ 98.885] (II) UXA(0): Driver registered support for the following operations: [ 98.885] (II) solid [ 98.885] (II) copy [ 98.885] (II) composite (RENDER acceleration) [ 98.886] (II) put_image [ 98.886] (II) get_image [ 98.886] (==) intel(0): Backing store disabled [ 98.886] (==) intel(0): Silken mouse enabled [ 98.886] (II) intel(0): Initializing HW Cursor [ 98.886] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 98.891] (==) intel(0): DPMS enabled [ 98.891] (==) intel(0): Intel XvMC decoder enabled [ 98.891] (II) intel(0): Set up textured video [ 98.891] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 98.892] (II) intel(0): direct rendering: DRI2 Enabled [ 102.236] (--) RandR disabled [ 102.769] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 102.769] (II) AIGLX: enabled GLX_INTEL_swap_event [ 102.769] (II) AIGLX: enabled GLX_ARB_create_context [ 102.769] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 102.769] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 102.770] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 102.770] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 102.771] (II) AIGLX: Loaded and initialized i965 [ 102.771] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 102.774] (II) intel(0): Setting screen physical size to 677 x 381 [ 103.110] (II) config/devd: probing input devices... [ 103.111] (II) config/devd: adding input device (null) (/dev/kbdmux) [ 103.111] (**) kbdmux: Applying InputClass "Keyboard Defaults" [ 103.111] (II) LoadModule: "kbd" [ 103.112] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so [ 103.113] (II) Module kbd: vendor="X.Org Foundation" [ 103.113] compiled for 1.14.7, module version = 1.8.0 [ 103.113] Module class: X.Org XInput Driver [ 103.113] ABI class: X.Org XInput driver, version 19.1 [ 103.114] (II) Using input driver 'kbd' for 'kbdmux' [ 103.114] (**) kbdmux: always reports core events [ 103.114] (**) kbdmux: always reports core events [ 103.114] (**) Option "Protocol" "standard" [ 103.114] (**) Option "XkbRules" "base" [ 103.114] (**) Option "XkbModel" "pc105" [ 103.114] (**) Option "XkbLayout" "de" [ 103.115] (**) Option "config_info" "devd:kbdmux" [ 103.115] (II) XINPUT: Adding extended input device "kbdmux" (type: KEYBOARD, id 6) [ 103.192] (II) config/devd: kbdmux is enabled, ignoring device ukbd0 [ 103.192] (II) config/devd: kbdmux is enabled, ignoring device ukbd1 [ 103.192] (II) config/devd: kbdmux is enabled, ignoring device atkbd0 [ 103.193] (II) config/devd: adding input device (null) (/dev/sysmouse) [ 103.193] (**) sysmouse: Applying InputClass "Mouse Defaults" [ 103.193] (II) LoadModule: "mouse" [ 103.194] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so [ 103.196] (II) Module mouse: vendor="X.Org Foundation" [ 103.196] compiled for 1.14.7, module version = 1.9.1 [ 103.196] Module class: X.Org XInput Driver [ 103.197] ABI class: X.Org XInput driver, version 19.1 [ 103.197] (II) Using input driver 'mouse' for 'sysmouse' [ 103.197] (**) sysmouse: always reports core events [ 103.197] (**) Option "Device" "/dev/sysmouse" [ 103.197] (==) sysmouse: Protocol: "Auto" [ 103.197] (**) sysmouse: always reports core events [ 103.198] (==) sysmouse: Emulate3Buttons, Emulate3Timeout: 50 [ 103.198] (**) sysmouse: ZAxisMapping: buttons 4 and 5 [ 103.198] (**) sysmouse: Buttons: 5 [ 103.198] (**) Option "config_info" "devd:sysmouse" [ 103.198] (II) XINPUT: Adding extended input device "sysmouse" (type: MOUSE, id 7) [ 103.198] (**) sysmouse: (accel) keeping acceleration scheme 1 [ 103.198] (**) sysmouse: (accel) acceleration profile 0 [ 103.199] (**) sysmouse: (accel) acceleration factor: 2.000 [ 103.199] (**) sysmouse: (accel) acceleration threshold: 4 [ 103.199] (II) sysmouse: SetupAuto: hw.iftype is 4, hw.model is 0 [ 103.199] (II) sysmouse: SetupAuto: protocol is SysMouse [ 103.199] (II) config/devd: device /dev/ums0 already opened [ 103.199] (II) config/devd: device /dev/ums1 already opened [ 103.200] (II) config/devd: device /dev/psm0 already opened [ 120.155] (II) intel(0): EDID vendor "SAM", prod id 1088 [ 120.156] (II) intel(0): Using EDID range info for horizontal sync [ 120.156] (II) intel(0): Using EDID range info for vertical refresh [ 120.157] (II) intel(0): Printing DDC gathered Modelines: [ 120.157] (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP) [ 120.158] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 120.158] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 120.158] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 120.159] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 120.159] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 120.159] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 120.160] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 120.160] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 120.161] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 120.161] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 120.162] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e) [ 120.162] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e) [ 120.162] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 122.463] (II) intel(0): Allocated new frame buffer 1920x1200 stride 7680, tiled [ 123.299] [mi] Increasing EQ size to 512 to prevent dropped events. [ 129.841] (II) intel(0): EDID vendor "SAM", prod id 1088 [ 129.842] (II) intel(0): Using hsync ranges from config file [ 129.842] (II) intel(0): Using vrefresh ranges from config file [ 129.842] (II) intel(0): Printing DDC gathered Modelines: [ 129.843] (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP) [ 129.843] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 129.844] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 129.844] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 129.844] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 129.844] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 129.845] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 129.845] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 129.846] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 129.846] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 129.846] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 129.847] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e) [ 129.847] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e) [ 129.847] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 195.075] (II) intel(0): EDID vendor "SAM", prod id 1088 [ 195.076] (II) intel(0): Using hsync ranges from config file [ 195.076] (II) intel(0): Using vrefresh ranges from config file [ 195.076] (II) intel(0): Printing DDC gathered Modelines: [ 195.077] (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP) [ 195.077] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 195.078] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 195.078] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 195.078] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 195.079] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 195.079] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 195.079] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 195.080] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 195.080] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 195.081] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 195.081] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e) [ 195.081] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e) [ 195.082] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 229.751] (II) intel(0): EDID vendor "SAM", prod id 1088 [ 229.752] (II) intel(0): Using hsync ranges from config file [ 229.753] (II) intel(0): Using vrefresh ranges from config file [ 229.753] (II) intel(0): Printing DDC gathered Modelines: [ 229.754] (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP) [ 229.754] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 229.755] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 229.756] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 229.756] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 229.757] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 229.757] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 229.758] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 229.758] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 229.759] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 229.759] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 229.760] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e) [ 229.760] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e) [ 229.761] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 237.391] (II) intel(0): EDID vendor "SAM", prod id 1088 [ 237.391] (II) intel(0): Using hsync ranges from config file [ 237.392] (II) intel(0): Using vrefresh ranges from config file [ 237.392] (II) intel(0): Printing DDC gathered Modelines: [ 237.393] (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP) [ 237.393] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 237.394] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 237.395] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 237.395] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 237.395] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 237.396] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 237.397] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 237.397] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 237.397] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 237.398] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 237.399] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e) [ 237.399] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e) [ 237.399] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 248.032] (II) intel(0): EDID vendor "SAM", prod id 1088 [ 248.033] (II) intel(0): Using hsync ranges from config file [ 248.034] (II) intel(0): Using vrefresh ranges from config file [ 248.035] (II) intel(0): Printing DDC gathered Modelines: [ 248.035] (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP) [ 248.036] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 248.038] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 248.039] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 248.039] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 248.040] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 248.041] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 248.042] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 248.043] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 248.044] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 248.045] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 248.045] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e) [ 248.046] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e) [ 248.047] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 258.818] (II) intel(0): EDID vendor "SAM", prod id 1088 [ 258.818] (II) intel(0): Using hsync ranges from config file [ 258.819] (II) intel(0): Using vrefresh ranges from config file [ 258.819] (II) intel(0): Printing DDC gathered Modelines: [ 258.819] (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP) [ 258.819] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 258.820] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 258.820] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 258.820] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 258.821] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 258.821] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 258.821] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 258.822] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 258.822] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 258.822] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 258.823] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e) [ 258.823] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e) [ 258.823] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 274.756] (II) intel(0): EDID vendor "SAM", prod id 1088 [ 274.756] (II) intel(0): Using hsync ranges from config file [ 274.757] (II) intel(0): Using vrefresh ranges from config file [ 274.757] (II) intel(0): Printing DDC gathered Modelines: [ 274.758] (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP) [ 274.758] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 274.759] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 274.760] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 274.760] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 274.761] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 274.761] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 274.762] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 274.762] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 274.763] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 274.763] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 274.764] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e) [ 274.765] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e) [ 274.765] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 281.287] (II) intel(0): EDID vendor "SAM", prod id 1088 [ 281.288] (II) intel(0): Using hsync ranges from config file [ 281.288] (II) intel(0): Using vrefresh ranges from config file [ 281.289] (II) intel(0): Printing DDC gathered Modelines: [ 281.289] (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP) [ 281.289] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 281.290] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 281.290] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 281.291] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 281.291] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 281.291] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 281.292] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 281.292] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 281.293] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 281.293] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 281.293] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e) [ 281.294] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e) [ 281.294] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 285.039] (II) intel(0): EDID vendor "SAM", prod id 1088 [ 285.040] (II) intel(0): Using hsync ranges from config file [ 285.040] (II) intel(0): Using vrefresh ranges from config file [ 285.040] (II) intel(0): Printing DDC gathered Modelines: [ 285.040] (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP) [ 285.041] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 285.041] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 285.041] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 285.042] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 285.042] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 285.042] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 285.043] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 285.043] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 285.043] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 285.043] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 285.044] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e) [ 285.044] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e) [ 285.044] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 294.856] (II) intel(0): EDID vendor "SAM", prod id 1088 [ 294.857] (II) intel(0): Using hsync ranges from config file [ 294.857] (II) intel(0): Using vrefresh ranges from config file [ 294.858] (II) intel(0): Printing DDC gathered Modelines: [ 294.858] (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP) [ 294.858] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 294.858] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 294.859] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 294.859] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 294.859] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 294.860] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 294.860] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 294.860] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 294.860] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 294.861] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 294.861] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e) [ 294.861] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e) [ 294.862] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 310.596] (II) intel(0): EDID vendor "SAM", prod id 1088 [ 310.597] (II) intel(0): Using hsync ranges from config file [ 310.598] (II) intel(0): Using vrefresh ranges from config file [ 310.598] (II) intel(0): Printing DDC gathered Modelines: [ 310.598] (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP) [ 310.599] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 310.599] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 310.600] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 310.600] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 310.600] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 310.601] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 310.601] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 310.601] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 310.602] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 310.602] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 310.603] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e) [ 310.603] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e) [ 310.603] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 343.076] (II) intel(0): EDID vendor "SAM", prod id 1088 [ 343.077] (II) intel(0): Using hsync ranges from config file [ 343.078] (II) intel(0): Using vrefresh ranges from config file [ 343.078] (II) intel(0): Printing DDC gathered Modelines: [ 343.078] (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP) [ 343.079] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 343.079] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 343.080] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 343.080] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 343.080] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 343.081] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 343.081] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 343.082] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 343.082] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 343.082] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 343.083] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e) [ 343.083] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e) [ 343.084] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 343.113] (II) intel(0): Allocated new frame buffer 1920x1600 stride 7680, tiled [ 343.221] (II) intel(0): Allocated new frame buffer 1600x1200 stride 6656, tiled [ 351.540] (II) intel(0): EDID vendor "SAM", prod id 1088 [ 351.541] (II) intel(0): Using hsync ranges from config file [ 351.541] (II) intel(0): Using vrefresh ranges from config file [ 351.542] (II) intel(0): Printing DDC gathered Modelines: [ 351.542] (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP) [ 351.542] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 351.543] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 351.543] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 351.544] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 351.544] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 351.545] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 351.545] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 351.546] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 351.546] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e) [ 351.546] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e) [ 351.547] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e) [ 351.547] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e) [ 351.547] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e) [ 351.602] (II) intel(0): Allocated new frame buffer 1920x1200 stride 7680, tiled [-- Attachment #4 --] Copyright (c) 1992-2015 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.0-CURRENT #11 6496462(drm-i915-update-38)-dirty: Sat Oct 24 12:36:05 CEST 2015 root@colin:/usr/obj/usr/home/rc/freebsd_source/freebsd-base-graphics/sys/MYCONFIG amd64 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 WARNING: WITNESS option enabled, expect reduced performance. VT(vga): resolution 640x480 CPU: Intel(R) Core(TM) i7-4710MQ CPU @ 2.50GHz (2494.28-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7fdafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x21<LAHF,ABM> Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 17983078400 (17150 MB) avail memory = 16508624896 (15743 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 cpu4 (AP): APIC ID: 4 cpu5 (AP): APIC ID: 5 cpu6 (AP): APIC ID: 6 cpu7 (AP): APIC ID: 7 ioapic0 <Version 2.0> irqs 0-23 on motherboard random: entropy device external interface module_register_init: MOD_LOAD (vesa, 0xffffffff80745040, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" kbd1 at kbdmux0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <ALASKA A M I> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 cpu4: <ACPI CPU> on acpi0 cpu5: <ACPI CPU> on acpi0 cpu6: <ACPI CPU> on acpi0 cpu7: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff irq 16 at device 0.0 on pci1 vgapci1: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7400000-0xf77fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 agp0: <Haswell GT2 mobile> on vgapci1 agp0: aperture size is 256M, detected 32764k stolen memory vgapci1: Boot video device pci0: <multimedia, HDA> at device 3.0 (no driver attached) xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7a00000-0xf7a0ffff irq 16 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 pci0: <simple comms> at device 22.0 (no driver attached) ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7a1c000-0xf7a1c3ff irq 16 at device 26.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 pci0: <multimedia, HDA> at device 27.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pci3: <ACPI PCI bus> on pcib3 pci3: <network> at device 0.0 (no driver attached) pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci4: <ACPI PCI bus> on pcib4 pci4: <unknown> at device 0.0 (no driver attached) re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf7814000-0xf7814fff,0xf7810000-0xf7813fff irq 19 at device 0.1 on pci4 re0: Using 1 MSI-X message re0: ASPM disabled re0: Chip rev. 0x5c800000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: 80:fa:5b:07:fc:3d ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7a1b000-0xf7a1b3ff irq 23 at device 29.0 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci1 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7a1a000-0xf7a1a7ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Synaptics Touchpad, device ID 0 orm0: <ISA Option ROM> at iomem 0xcf000-0xcffff on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 est2: <Enhanced SpeedStep Frequency Control> on cpu2 p4tcc2: <CPU Frequency Thermal Control> on cpu2 est3: <Enhanced SpeedStep Frequency Control> on cpu3 p4tcc3: <CPU Frequency Thermal Control> on cpu3 est4: <Enhanced SpeedStep Frequency Control> on cpu4 p4tcc4: <CPU Frequency Thermal Control> on cpu4 est5: <Enhanced SpeedStep Frequency Control> on cpu5 p4tcc5: <CPU Frequency Thermal Control> on cpu5 est6: <Enhanced SpeedStep Frequency Control> on cpu6 p4tcc6: <CPU Frequency Thermal Control> on cpu6 est7: <Enhanced SpeedStep Frequency Control> on cpu7 p4tcc7: <CPU Frequency Thermal Control> on cpu7 usbus0: 5.0Gbps Super Speed USB v3.0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec usbus1: 480Mbps High Speed USB v2.0 usbus2: 480Mbps High Speed USB v2.0 ugen0.1: <0x8086> at usbus0 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ada0 at ahcich4 bus 0 scbus0 target 0 lun 0 ada0: <WDC WD5000LPVX-00V0TT0 01.01A01> ACS-2 ATA SATA 3.x device ada0: Serial Number WD-WX61A25C78LL ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 476940MB (976773168 512 byte sectors) ada1 at ahcich5 bus 0 scbus1 target 0 lun 0 ada1: <Samsung SSD 840 EVO 250GB mSATA EXT41B6Q> ACS-2 ATA SATA 3.x device ada1: Serial Number S1KPNSAF502033T ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada1: Command Queueing enabled ada1: 238475MB (488397168 512 byte sectors) ada1: quirks=0x1<4K> SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #7 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #6 Launched! SMP: AP CPU #4 Launched! SMP: AP CPU #5 Launched! Timecounter "TSC-low" frequency 1247138226 Hz quality 1000 WARNING: WITNESS option enabled, expect reduced performance. Root mount waiting for: usbus2 usbus1 usbus0 random: unblocking device. uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub0: 21 ports with 21 removable, self powered Root mount waiting for: usbus2 usbus1 usbus0 ugen1.2: <vendor 0x8087> at usbus1 uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 ugen2.2: <vendor 0x8087> at usbus2 uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2 ugen0.2: <Sierra Wireless, Incorporated> at usbus0 uhub3: 6 ports with 6 removable, self powered uhub4: 8 ports with 8 removable, self powered Trying to mount root from zfs:root []... siba_bwn0: <Broadcom BCM4312 802.11b/g Wireless> mem 0xf7900000-0xf7903fff irq 18 at device 0.0 on pci3 bwn0 on siba_bwn0 bwn0: WLAN (chipid 0x4312 rev 15) PHY (analog 6 type 5 rev 1) RADIO (manuf 0x17f ver 0x2062 rev 2) bwn0: DMA (64 bits) bwn0: Using 1 MSI messages re0: link state changed to DOWN u3g0: <Data Interface> on usbus0 u3g0: Found 3 ports. info: [drm] Initialized drm 1.1.0 20060810 [drm:pid739:drm_probe_helper] drmn1 desc: Intel Haswell (GT2 mobile) drmn1: <Intel Haswell (GT2 mobile)> on vgapci1 [drm:pid739:drm_get_pci_dev] [drm:pid739:drm_ctxbitmap_next] bit : 0 [drm:pid739:drm_ctxbitmap_init] drm_ctxbitmap_init : 0 [drm:pid739:drm_get_minor] [drm:pid739:drm_get_minor] new minor assigned 65 [drm:pid739:drm_get_minor] [drm:pid739:drm_get_minor] new minor assigned 1 [drm:KMS:pid739:i915_dump_device_info] i915 device info: gen=7, pciid=0x0416 flags=is_mobile,need_gfx_hws,is_haswell,has_force_wake,has_hotplug,has_bsd_ring,has_blt_ring,has_llc,info: [drm] Memory usable by graphics device = 2048M [drm:KMS:pid739:i915_gem_gtt_init] GMADR size = 256M [drm:KMS:pid739:i915_gem_gtt_init] GTT stolen size = 0M [drm:pid739:drm_addmap_core] offset = 0xf7400000, size = 0x00200000, type = 1 info: [drm] MTRR allocation failed. Graphics performance may suffer. [drm:KMS:pid739:intel_detect_pch] Found LynxPoint PCH iicbus0: <Philips I2C bus>error: [drm:pid739:i915_write32] *ERROR* Unknown unclaimed register before writing to c5100 on iicbb0 addr 0xff iic0: <I2C generic I/O> on iicbus0 iic1: <I2C generic I/O> on iicbus1 iicbus2: <Philips I2C bus> on iicbb1 addr 0x0 iic2: <I2C generic I/O> on iicbus2 iic3: <I2C generic I/O> on iicbus3 iicbus4: <Philips I2C bus> on iicbb2 addr 0x0 iic4: <I2C generic I/O> on iicbus4 iic5: <I2C generic I/O> on iicbus5 iicbus6: <Philips I2C bus> on iicbb3 addr 0x0 iic6: <I2C generic I/O> on iicbus6 iic7: <I2C generic I/O> on iicbus7 iicbus8: <Philips I2C bus> on iicbb4 addr 0x0 iic8: <I2C generic I/O> on iicbus8 iic9: <I2C generic I/O> on iicbus9 iicbus10: <Philips I2C bus> on iicbb5 addr 0x0 iic10: <I2C generic I/O> on iicbus10 iic11: <I2C generic I/O> on iicbus11 [drm:pid739:intel_opregion_setup] graphic opregion physical addr: 0xcb795018 [drm:pid739:intel_opregion_setup] Public ACPI methods supported [drm:pid739:intel_opregion_setup] SWSCI supported [drm:pid739:intel_opregion_setup] ASLE supported [drm:pid739:drm_pci_enable_msi] MSI count = 1 info: [drm] MSI enabled 1 message(s) info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). info: [drm] Driver supports precise vblank timestamp query. [drm:KMS:pid739:init_vbt_defaults] Set default to SSC at 100MHz [drm:KMS:pid739:intel_parse_bios] Using VBT from OpRegion: $VBT HASWELL d [drm:KMS:pid739:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120 display_clock_mode 0 fdi_rx_polarity_inverted 0 [drm:KMS:pid739:parse_general_definitions] crt_ddc_bus_pin: 0 [drm:KMS:pid739:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [drm:KMS:pid739:drm_mode_debug_printmodeline] Modeline 0:"2560x1440" 0 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x8 0xa [drm:KMS:pid739:parse_lfp_panel_data] VBT initial LVDS value 30033c [drm:KMS:pid739:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables: [drm:KMS:pid739:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [drm:KMS:pid739:parse_sdvo_device_mapping] No SDVO device info is found in VBT [drm:KMS:pid739:intel_modeset_init] 3 display pipes available. [drm:KMS:pid739:intel_ddi_pll_init] CDCLK running at 540MHz [drm:KMS:pid739:intel_pch_pll_init] No PCH PLLs on this hardware, skipping initialisation [drm:KMS:pid739:intel_lvds_init] LVDS is not present in VBT [drm:KMS:pid739:intel_dp_init_panel_power_sequencer] cur t1_t3 3000 t8 0 t9 3808 t10 500 t11_t12 6000 [drm:KMS:pid739:intel_dp_init_panel_power_sequencer] vbt t1_t3 3000 t8 10 t9 12000 t10 500 t11_t12 5000 [drm:KMS:pid739:intel_dp_init_panel_power_sequencer] panel power up delay 300, power down delay 50, power cycle delay 600 [drm:KMS:pid739:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 1200 [drm:KMS:pid739:intel_dp_i2c_init] i2c_init DPDDC-A [drm:KMS:pid739:ironlake_edp_panel_vdd_on] Turn eDP VDD on [drm:KMS:pid739:ironlake_edp_panel_vdd_on] PCH_PP_STATUS: 0x80000008 PCH_PP_CONTROL: 0xabcd000f [drm:KMS:pid739:intel_dp_i2c_aux_ch] aux_i2c nack [drm:KMS:pid739:intel_dp_i2c_aux_ch] aux_i2c nack [drm:KMS:pid739:ironlake_edp_panel_vdd_off] Turn eDP VDD off 1 [drm:KMS:pid739:ironlake_edp_panel_vdd_on] Turn eDP VDD on [drm:KMS:pid739:ironlake_edp_panel_vdd_on] eDP VDD already on [drm:KMS:pid739:ironlake_edp_panel_vdd_off] Turn eDP VDD off 1 [drm:KMS:pid739:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0xbb8000a, PP_OFF 0x1f40ee0, PP_DIV 0x186906 [drm:KMS:pid739:ironlake_edp_panel_vdd_on] Turn eDP VDD on [drm:KMS:pid739:ironlake_edp_panel_vdd_on] eDP VDD already on [drm:KMS:pid739:iic_dp_aux_xfer] dp_aux_xfer return 0 [drm:KMS:pid739:iic_dp_aux_xfer] dp_aux_xfer return 0 [drm:KMS:pid739:drm_edid_to_eld] ELD: no CEA Extension found [drm:KMS:pid739:ironlake_edp_panel_vdd_off] Turn eDP VDD off 1 [drm:KMS:pid739:intel_panel_get_backlight] get backlight PWM = 5273 [drm:KMS:pid739:intel_dp_i2c_init] i2c_init DPDDC-C [drm:KMS:pid739:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f [drm:KMS:pid739:intel_dp_i2c_aux_ch] aux_ch failed -60 [drm:KMS:pid739:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f [drm:KMS:pid739:intel_dp_i2c_aux_ch] aux_ch failed -60 [drm:KMS:pid739:intel_dp_i2c_init] i2c_init DPDDC-D [drm:KMS:pid739:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f [drm:KMS:pid739:intel_dp_i2c_aux_ch] aux_ch failed -60 [drm:KMS:pid739:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f [drm:KMS:pid739:intel_dp_i2c_aux_ch] aux_ch failed -60 drmn1: taking over the fictitious range 0xd0000000-0xe0000000 [drm:KMS:pid739:init_status_page] render ring hws offset: 0x00000000 [drm:KMS:pid739:init_status_page] bsd ring hws offset: 0x00022000 [drm:KMS:pid739:init_status_page] blitter ring hws offset: 0x00043000 [drm:KMS:pid739:create_default_context] Default HW context loaded [drm:KMS:pid739:i915_gem_context_init] HW context support initialized [drm:KMS:pid739:intel_prepare_ddi_buffers] Initializing DDI buffers for port A in DP mode [drm:KMS:pid739:intel_prepare_ddi_buffers] Initializing DDI buffers for port B in DP mode [drm:KMS:pid739:intel_prepare_ddi_buffers] Initializing DDI buffers for port C in DP mode [drm:KMS:pid739:intel_prepare_ddi_buffers] Initializing DDI buffers for port D in DP mode [drm:KMS:pid739:intel_prepare_ddi_buffers] Initializing DDI buffers for port E in FDI mode [drm:KMS:pid739:intel_modeset_setup_hw_state] Pipe A using transcoder EDP [drm:KMS:pid739:intel_modeset_setup_hw_state] [CRTC:3] hw state readout: enabled [drm:KMS:pid739:intel_modeset_setup_hw_state] [CRTC:5] hw state readout: disabled [drm:KMS:pid739:intel_modeset_setup_hw_state] [CRTC:7] hw state readout: disabled [drm:KMS:pid739:intel_ddi_get_crtc_pll] Pipe A connected to port A using clock 0x20000000 [drm:KMS:pid739:intel_modeset_setup_hw_state] [ENCODER:9:TMDS-9] hw state readout: enabled, pipe=0 [drm:KMS:pid739:intel_modeset_setup_hw_state] [ENCODER:17:TMDS-17] hw state readout: disabled, pipe=0 [drm:KMS:pid739:intel_modeset_setup_hw_state] [ENCODER:20:TMDS-20] hw state readout: disabled, pipe=0 [drm:KMS:pid739:intel_modeset_setup_hw_state] [CONNECTOR:10:eDP-1] hw state readout: enabled [drm:KMS:pid739:intel_modeset_setup_hw_state] [CONNECTOR:18:HDMI-A-1] hw state readout: disabled [drm:KMS:pid739:intel_modeset_setup_hw_state] [CONNECTOR:19:DP-1] hw state readout: disabled [drm:KMS:pid739:intel_modeset_setup_hw_state] [CONNECTOR:21:HDMI-A-2] hw state readout: disabled [drm:KMS:pid739:intel_modeset_setup_hw_state] [CONNECTOR:22:DP-2] hw state readout: disabled [drm:KMS:pid739:intel_connector_check_state] [CONNECTOR:10:eDP-1] [drm:KMS:pid739:intel_modeset_check_state] [ENCODER:9:TMDS-9] [drm:KMS:pid739:intel_modeset_check_state] [ENCODER:17:TMDS-17] [drm:KMS:pid739:intel_modeset_check_state] [ENCODER:20:TMDS-20] [drm:KMS:pid739:intel_modeset_check_state] [CRTC:3] [drm:KMS:pid739:intel_modeset_check_state] [CRTC:5] [drm:KMS:pid739:intel_modeset_check_state] [CRTC:7] [drm:pid739:drm_irq_install] irq=268 info: [drm] Connector eDP-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.eDP-1 info: [drm] - kern.vt.fb.default_mode [drm:KMS:pid739:drm_fb_helper_parse_command_line] cmdline mode for connector eDP-1 1024x768@60Hz info: [drm] Connector HDMI-A-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.HDMI-A-1 info: [drm] - kern.vt.fb.default_mode [drm:KMS:pid739:drm_fb_helper_parse_command_line] cmdline mode for connector HDMI-A-1 1024x768@60Hz info: [drm] Connector DP-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.DP-1 info: [drm] - kern.vt.fb.default_mode [drm:KMS:pid739:drm_fb_helper_parse_command_line] cmdline mode for connector DP-1 1024x768@60Hz info: [drm] Connector HDMI-A-2: get mode from tunables: info: [drm] - kern.vt.fb.modes.HDMI-A-2 info: [drm] - kern.vt.fb.default_mode [drm:KMS:pid739:drm_fb_helper_parse_command_line] cmdline mode for connector HDMI-A-2 1024x768@60Hz info: [drm] Connector DP-2: get mode from tunables: info: [drm] - kern.vt.fb.modes.DP-2 info: [drm] - kern.vt.fb.default_mode [drm:KMS:pid739:drm_fb_helper_parse_command_line] cmdline mode for connector DP-2 1024x768@60Hz [drm:KMS:pid739:drm_helper_probe_single_connector_modes] [CONNECTOR:10:eDP-1] [drm:KMS:pid739:intel_dp_detect] DPCD: 12 0A FF 40 01 00 00 00 02 00 00 00 10 0B 01 [drm:KMS:pid739:drm_edid_to_eld] ELD: no CEA Extension found [drm:KMS:pid739:drm_helper_probe_single_connector_modes] [CONNECTOR:10:eDP-1] probed modes : [drm:KMS:pid739:drm_mode_debug_printmodeline] Modeline 23:"2560x1440" 60 241500 2560 2608 2640 2720 1440 1443 1448 1481 0x48 0xa [drm:KMS:pid739:drm_helper_probe_single_connector_modes] [CONNECTOR:18:HDMI-A-1] [drm:KMS:pid739:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [drm:KMS:pid739:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6 [drm:KMS:pid739:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [drm:KMS:pid739:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6 [drm:KMS:pid739:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [drm:KMS:pid739:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6 [drm:KMS:pid739:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [drm:KMS:pid739:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6 [drm:KMS:pid739:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1) [drm:KMS:pid739:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6 [drm:KMS:pid739:drm_helper_probe_single_connector_modes] [CONNECTOR:18:HDMI-A-1] disconnected [drm:KMS:pid739:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DP-1] [drm:KMS:pid739:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f [drm:KMS:pid739:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f [drm:KMS:pid739:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f [drm:KMS:pid739:intel_dp_detect] DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [drm:KMS:pid739:drm_helper_probe_single_connector_modes] [CONNECTOR:19:DP-1] disconnected [drm:KMS:pid739:drm_helper_probe_single_connector_modes] [CONNECTOR:21:HDMI-A-2] [drm:KMS:pid739:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [drm:KMS:pid739:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6 [drm:KMS:pid739:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [drm:KMS:pid739:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6 [drm:KMS:pid739:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [drm:KMS:pid739:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6 [drm:KMS:pid739:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [drm:KMS:pid739:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6 [drm:KMS:pid739:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1) [drm:KMS:pid739:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6 [drm:KMS:pid739:drm_helper_probe_single_connector_modes] [CONNECTOR:21:HDMI-A-2] disconnected [drm:KMS:pid739:drm_helper_probe_single_connector_modes] [CONNECTOR:22:DP-2] [drm:KMS:pid739:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f [drm:KMS:pid739:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f [drm:KMS:pid739:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f [drm:KMS:pid739:intel_dp_detect] DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [drm:KMS:pid739:drm_helper_probe_single_connector_modes] [CONNECTOR:22:DP-2] disconnected [drm:KMS:pid739:drm_setup_crtcs] [drm:KMS:pid739:drm_enable_connectors] connector 10 enabled? yes [drm:KMS:pid739:drm_enable_connectors] connector 18 enabled? no [drm:KMS:pid739:drm_enable_connectors] connector 19 enabled? no [drm:KMS:pid739:drm_enable_connectors] connector 21 enabled? no [drm:KMS:pid739:drm_enable_connectors] connector 22 enabled? no [drm:KMS:pid739:drm_target_preferred] looking for cmdline mode on connector 10 [drm:KMS:pid739:drm_target_preferred] found mode 1024x768 [drm:KMS:pid739:drm_setup_crtcs] picking CRTCs for 8192x8192 config [drm:KMS:pid739:drm_setup_crtcs] desired mode 1024x768 set on crtc 3 [drm:KMS:pid739:intelfb_create] allocated 1024x768 (s 24bits) fb: 0x00073000, bo 0xfffff8000e01d400 fbd1 on drmn1 VT: Replacing driver "vga" with new "fb". [drm:KMS:pid0:intel_crtc_set_config] [CRTC:3] [FB:25] #connectors=1 (x y) (0 0) [drm:KMS:pid0:intel_set_config_compute_mode_changes] crtc has no fb, full mode set [drm:KMS:pid0:intel_set_config_compute_mode_changes] modes are different, full mode set [drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 24:"1024x768" 0 64127 1024 1080 1184 1344 768 769 772 795 0x0 0x6 [drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:10:eDP-1] to [CRTC:3] [drm:KMS:pid0:intel_crtc_set_config] attempting to set mode from userspace [drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 24:"1024x768" 0 64127 1024 1080 1184 1344 768 769 772 795 0x0 0x6 [drm:KMS:pid0:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [drm:KMS:pid0:intel_dp_mode_fixup] DP link computation with max lane count 4 max bw 0a pixel clock 241500KHz [drm:KMS:pid0:intel_dp_mode_fixup] DP link bw 0a lane count 4 clock 270000 bpp 24 [drm:KMS:pid0:intel_dp_mode_fixup] DP link bw required 579600 available 864000 [drm:KMS:pid0:intel_modeset_adjusted_mode] [CRTC:3] [drm:KMS:pid0:intel_panel_actually_set_backlight] set backlight PWM = 0 [drm:KMS:pid0:ironlake_edp_backlight_off] info: [drm] Initialized i915 1.6.0 20080730 for drmn1 on minor 1 [drm:KMS:pid0:intel_enable_rc6] Haswell: only RC6 available info: [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [drm:pid0:drm_calc_vbltimestamp_from_scanoutpos] crtc 0: Noop due to uninitialized mode. [drm:KMS:pid0:ironlake_edp_panel_vdd_on] Turn eDP VDD on [drm:KMS:pid0:ironlake_edp_panel_vdd_on] eDP VDD already on [drm:KMS:pid0:ironlake_edp_panel_off] Turn eDP power off [drm:KMS:pid0:ironlake_wait_panel_off] Wait for panel power off time [drm:KMS:pid0:ironlake_wait_panel_status] mask b000000f value 00000000 status a0000003 control abcd0000 [drm:pid0:drm_vblank_get] enabling vblank on crtc 0, ret: -22 [drm:KMS:pid0:intel_choose_pipe_bpp_dither] clamping display bpc (was -1) to EDID reported max of 8 [drm:KMS:pid0:intel_choose_pipe_bpp_dither] setting pipe bpc to 8 (max display bpc 8) [drm:KMS:pid0:haswell_crtc_mode_set] Mode for pipe 0: [drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 24:"1024x768" 0 64127 1024 1080 1184 1344 768 769 772 795 0x0 0x6 [drm:KMS:pid0:ironlake_update_plane] Writing base 00073000 00000000 0 0 4096 [drm:KMS:pid0:intel_crtc_mode_set] [ENCODER:9:TMDS-9] set [MODE:24:1024x768] [drm:KMS:pid0:intel_ddi_mode_set] Preparing DDI mode for Haswell on port A, pipe A [drm:KMS:pid0:sandybridge_update_wm] FIFO watermarks For pipe A - plane 8, cursor: 6 [drm:KMS:pid0:ironlake_edp_panel_vdd_on] Turn eDP VDD on [drm:KMS:pid0:ironlake_wait_panel_power_cycle] Wait for panel power cycle [drm:KMS:pid0:ironlake_wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000 [drm:KMS:pid0:ironlake_edp_panel_vdd_on] PCH_PP_STATUS: 0x00000000 PCH_PP_CONTROL: 0xabcd0008 [drm:KMS:pid0:ironlake_edp_panel_vdd_on] eDP was not running [drm:KMS:pid0:ironlake_edp_panel_on] Turn eDP power on [drm:KMS:pid0:ironlake_wait_panel_power_cycle] Wait for panel power cycle [drm:KMS:pid0:ironlake_wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008 [drm:KMS:pid0:ironlake_wait_panel_on] Wait for panel power on [drm:KMS:pid0:ironlake_wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b [drm:KMS:pid0:ironlake_edp_panel_vdd_off] Turn eDP VDD off 1 [drm:KMS:pid0:ironlake_panel_vdd_off_sync] PCH_PP_STATUS: 0x80000008 PCH_PP_CONTROL: 0xabcd0003 [drm:KMS:pid0:intel_dp_start_link_train] training pattern 1 signal levels 00000000 [drm:KMS:pid0:intel_dp_start_link_train] clock recovery OK [drm:KMS:pid0:intel_dp_complete_link_train] Channel EQ done. DP Training successfull error: [drm:pid0:intel_dp_set_link_train] *ERROR* Timed out waiting for DP idle patterns error: [drm:pid0:i915_write32] *ERROR* Unknown unclaimed register before writing to 64040 [drm:KMS:pid0:ironlake_edp_backlight_on] [drm:KMS:pid0:intel_panel_actually_set_backlight] set backlight PWM = 5273 [drm:pid0:drm_calc_timestamping_constants] crtc 3: hwmode: htotal 2720, vtotal 1481, vdisplay 1440 [drm:pid0:drm_calc_timestamping_constants] crtc 3: clock 270000 kHz framedur 14919594 linedur 10074, pixeldur 3 [drm:KMS:pid0:intel_connector_check_state] [CONNECTOR:10:eDP-1] [drm:KMS:pid0:intel_modeset_check_state] [ENCODER:9:TMDS-9] [drm:KMS:pid0:intel_modeset_check_state] [ENCODER:17:TMDS-17] [drm:KMS:pid0:intel_modeset_check_state] [ENCODER:20:TMDS-20] [drm:KMS:pid0:intel_modeset_check_state] [CRTC:3] [drm:KMS:pid0:intel_modeset_check_state] [CRTC:5] [drm:KMS:pid0:intel_modeset_check_state] [CRTC:7] [drm:KMS:pid0:intel_crtc_set_config] [CRTC:5] [NOFB] [drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:10:eDP-1] to [CRTC:3] [drm:KMS:pid0:intel_crtc_set_config] [CRTC:7] [NOFB] [drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:10:eDP-1] to [CRTC:3] \000 [-- Attachment #5 --] [ 393.228] X.Org X Server 1.14.7 Release Date: 2014-06-05 [ 393.228] X Protocol Version 11, Revision 0 [ 393.228] Build Operating System: FreeBSD 10.1-RELEASE-p22 amd64 [ 393.228] Current Operating System: FreeBSD colin 11.0-CURRENT FreeBSD 11.0-CURRENT #12 6496462(drm-i915-update-38)-dirty: Sat Oct 24 13:22:14 CEST 2015 root@colin:/usr/obj/usr/home/rc/freebsd_source/freebsd-base-graphics/sys/MYCONFIG amd64 [ 393.228] Build Date: 08 October 2015 03:51:02AM [ 393.228] [ 393.228] Current version of pixman: 0.32.6 [ 393.228] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 393.228] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 393.229] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 24 13:36:30 2015 [ 393.230] (==) Using config directory: "/usr/local/etc/X11/xorg.conf.d" [ 393.230] (==) No Layout section. Using the first Screen section. [ 393.230] (**) |-->Screen "Screen0" (0) [ 393.231] (**) | |-->Monitor "<default monitor>" [ 393.231] (**) | |-->Device "Card0" [ 393.231] (==) No monitor specified for screen "Screen0". Using a default monitor configuration. [ 393.231] (==) Automatically adding devices [ 393.231] (==) Automatically enabling devices [ 393.231] (==) Not automatically adding GPU devices [ 393.239] (==) FontPath set to: /usr/local/share/fonts/misc/, /usr/local/share/fonts/TTF/, /usr/local/share/fonts/OTF/, /usr/local/share/fonts/Type1/, /usr/local/share/fonts/100dpi/, /usr/local/share/fonts/75dpi/ [ 393.239] (==) ModulePath set to "/usr/local/lib/xorg/modules" [ 393.239] (II) The server relies on devd to provide the list of input devices. If no devices become available, reconfigure devd or disable AutoAddDevices. [ 393.239] (II) Loader magic: 0x7f9af0 [ 393.239] (II) Module ABI versions: [ 393.239] X.Org ANSI C Emulation: 0.4 [ 393.239] X.Org Video Driver: 14.1 [ 393.239] X.Org XInput driver : 19.1 [ 393.239] X.Org Server Extension : 7.0 [ 393.239] (--) PCI:*(0:0:2:0) 8086:0416:1558:2300 rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/65536 [ 393.239] (--) PCI: (0:1:0:0) 10de:1392:1558:2300 rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128 [ 393.240] Initializing built-in extension Generic Event Extension [ 393.240] Initializing built-in extension SHAPE [ 393.240] Initializing built-in extension MIT-SHM [ 393.240] Initializing built-in extension XInputExtension [ 393.240] Initializing built-in extension XTEST [ 393.240] Initializing built-in extension BIG-REQUESTS [ 393.240] Initializing built-in extension SYNC [ 393.240] Initializing built-in extension XKEYBOARD [ 393.240] Initializing built-in extension XC-MISC [ 393.240] Initializing built-in extension XINERAMA [ 393.240] Initializing built-in extension XFIXES [ 393.240] Initializing built-in extension RENDER [ 393.240] Initializing built-in extension RANDR [ 393.240] Initializing built-in extension COMPOSITE [ 393.240] Initializing built-in extension DAMAGE [ 393.240] Initializing built-in extension MIT-SCREEN-SAVER [ 393.240] Initializing built-in extension DOUBLE-BUFFER [ 393.240] Initializing built-in extension RECORD [ 393.240] Initializing built-in extension DPMS [ 393.240] Initializing built-in extension X-Resource [ 393.241] Initializing built-in extension XVideo [ 393.241] Initializing built-in extension XVideo-MotionCompensation [ 393.241] Initializing built-in extension XFree86-VidModeExtension [ 393.241] Initializing built-in extension XFree86-DGA [ 393.241] Initializing built-in extension XFree86-DRI [ 393.241] Initializing built-in extension DRI2 [ 393.241] (II) LoadModule: "glx" [ 393.243] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so [ 393.245] (II) Module glx: vendor="X.Org Foundation" [ 393.245] compiled for 1.14.7, module version = 1.0.0 [ 393.245] ABI class: X.Org Server Extension, version 7.0 [ 393.245] (==) AIGLX enabled [ 393.246] Loading extension GLX [ 393.246] (II) LoadModule: "intel" [ 393.247] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so [ 393.251] (II) Module intel: vendor="X.Org Foundation" [ 393.251] compiled for 1.14.7, module version = 2.21.15 [ 393.251] Module class: X.Org Video Driver [ 393.251] ABI class: X.Org Video Driver, version 14.1 [ 393.251] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics, HD Graphics 2000, HD Graphics 3000, HD Graphics 2500, HD Graphics 4000, HD Graphics P4000, HD Graphics 4600, HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100, HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200 [ 393.254] (--) Using syscons driver with X support (version 0.x) [ 393.254] (--) using VT number 9 [ 393.257] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support [ 393.258] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 393.258] (==) intel(0): RGB weight 888 [ 393.258] (==) intel(0): Default visual is TrueColor [ 393.258] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600 [ 393.259] (**) intel(0): Relaxed fencing enabled [ 393.259] (**) intel(0): Wait on SwapBuffers? enabled [ 393.259] (**) intel(0): Triple buffering? enabled [ 393.259] (**) intel(0): Framebuffer tiled [ 393.259] (**) intel(0): Pixmaps tiled [ 393.259] (**) intel(0): 3D buffers tiled [ 393.259] (**) intel(0): SwapBuffers wait enabled [ 393.259] (==) intel(0): video overlay key set to 0x101fe [ 393.260] (II) intel(0): Output eDP1 has no monitor section [ 393.271] (II) intel(0): Output HDMI1 has no monitor section [ 393.289] (II) intel(0): Output DP1 has no monitor section [ 393.299] (II) intel(0): Output HDMI2 has no monitor section [ 393.317] (II) intel(0): Output DP2 has no monitor section [ 393.319] (II) intel(0): EDID for output eDP1 [ 393.319] (II) intel(0): Manufacturer: SHP Model: 13ff Serial#: 0 [ 393.319] (II) intel(0): Year: 2013 Week: 0 [ 393.319] (II) intel(0): EDID Version: 1.4 [ 393.319] (II) intel(0): Digital Display Input [ 393.319] (II) intel(0): 8 bits per channel [ 393.319] (II) intel(0): Digital interface is DisplayPort [ 393.319] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 17 [ 393.319] (II) intel(0): Gamma: 2.20 [ 393.319] (II) intel(0): No DPMS capabilities specified [ 393.319] (II) intel(0): Supported color encodings: RGB 4:4:4 [ 393.319] (II) intel(0): Default color space is primary color space [ 393.319] (II) intel(0): First detailed timing is preferred mode [ 393.319] (II) intel(0): Preferred mode is native pixel format and refresh rate [ 393.319] (II) intel(0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600 [ 393.319] (II) intel(0): blueX: 0.149 blueY: 0.060 whiteX: 0.312 whiteY: 0.328 [ 393.319] (II) intel(0): Manufacturer's mask: 0 [ 393.319] (II) intel(0): Supported detailed timing: [ 393.319] (II) intel(0): clock: 241.5 MHz Image Size: 294 x 165 mm [ 393.319] (II) intel(0): h_active: 2560 h_sync: 2608 h_sync_end 2640 h_blank_end 2720 h_border: 0 [ 393.319] (II) intel(0): v_active: 1440 v_sync: 1443 v_sync_end 1448 v_blanking: 1481 v_border: 0 [ 393.320] (II) intel(0): Monitor name: LQ133T1JW02 [ 393.320] (II) intel(0): EDID (in hex): [ 393.320] (II) intel(0): 00ffffffffffff004d10ff1300000000 [ 393.320] (II) intel(0): 00170104a51d117806de50a3544c9926 [ 393.320] (II) intel(0): 0f505400000001010101010101010101 [ 393.320] (II) intel(0): 010101010101565e00a0a0a029503020 [ 393.320] (II) intel(0): 350026a5100000180000001000000000 [ 393.320] (II) intel(0): 00000000000000000000000000100000 [ 393.320] (II) intel(0): 000000000000000000000000000000fc [ 393.320] (II) intel(0): 004c5131333354314a5730320a2000b0 [ 393.320] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 393.320] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 393.320] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 393.320] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 393.320] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 393.320] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 393.320] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 393.320] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 393.320] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 393.320] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 393.321] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 393.321] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 393.321] (II) intel(0): Printing probed modes for output eDP1 [ 393.321] (II) intel(0): Modeline "2560x1440"x60.0 241.50 2560 2608 2640 2720 1440 1443 1448 1481 -hsync -vsync (88.8 kHz UeP) [ 393.321] (II) intel(0): Modeline "1920x1440"x60.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz d) [ 393.321] (II) intel(0): Modeline "1856x1392"x60.0 218.30 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.4 kHz d) [ 393.321] (II) intel(0): Modeline "1792x1344"x60.0 204.80 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.7 kHz d) [ 393.321] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz d) [ 393.321] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d) [ 393.321] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d) [ 393.321] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d) [ 393.321] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 393.321] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 393.321] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 393.321] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 393.331] (II) intel(0): EDID for output HDMI1 [ 393.349] (II) intel(0): EDID for output DP1 [ 393.359] (II) intel(0): EDID for output HDMI2 [ 393.377] (II) intel(0): EDID for output DP2 [ 393.377] (II) intel(0): Output eDP1 connected [ 393.377] (II) intel(0): Output HDMI1 disconnected [ 393.377] (II) intel(0): Output DP1 disconnected [ 393.377] (II) intel(0): Output HDMI2 disconnected [ 393.377] (II) intel(0): Output DP2 disconnected [ 393.377] (II) intel(0): Using user preference for initial modes [ 393.377] (II) intel(0): Output eDP1 using initial mode 2560x1440 [ 393.378] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 393.378] (II) intel(0): Kernel page flipping support detected, enabling [ 393.378] (==) intel(0): DPI set to (96, 96) [ 393.378] (II) Loading sub module "fb" [ 393.378] (II) LoadModule: "fb" [ 393.379] (II) Loading /usr/local/lib/xorg/modules/libfb.so [ 393.386] (II) Module fb: vendor="X.Org Foundation" [ 393.386] compiled for 1.14.7, module version = 1.0.0 [ 393.386] ABI class: X.Org ANSI C Emulation, version 0.4 [ 393.386] (II) Loading sub module "dri2" [ 393.386] (II) LoadModule: "dri2" [ 393.386] (II) Module "dri2" already built-in [ 393.386] (==) Depth 24 pixmap format is 32 bpp [ 393.387] (II) intel(0): [DRI2] Setup complete [ 393.387] (II) intel(0): [DRI2] DRI driver: i965 [ 393.387] (II) intel(0): Allocated new frame buffer 2560x1440 stride 10240, tiled [ 393.397] (II) UXA(0): Driver registered support for the following operations: [ 393.397] (II) solid [ 393.397] (II) copy [ 393.397] (II) composite (RENDER acceleration) [ 393.397] (II) put_image [ 393.397] (II) get_image [ 393.397] (==) intel(0): Backing store disabled [ 393.397] (==) intel(0): Silken mouse enabled [ 393.397] (II) intel(0): Initializing HW Cursor [ 393.398] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 393.400] (==) intel(0): DPMS enabled [ 393.400] (==) intel(0): Intel XvMC decoder enabled [ 393.400] (II) intel(0): Set up textured video [ 393.400] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 393.400] (II) intel(0): direct rendering: DRI2 Enabled [ 396.457] (--) RandR disabled [ 396.520] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 396.520] (II) AIGLX: enabled GLX_INTEL_swap_event [ 396.520] (II) AIGLX: enabled GLX_ARB_create_context [ 396.520] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 396.520] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 396.520] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 396.520] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 396.520] (II) AIGLX: Loaded and initialized i965 [ 396.520] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 396.521] (II) intel(0): Setting screen physical size to 677 x 381 [ 396.593] (II) config/devd: probing input devices... [ 396.593] (II) config/devd: adding input device (null) (/dev/kbdmux) [ 396.593] (**) kbdmux: Applying InputClass "Keyboard Defaults" [ 396.593] (II) LoadModule: "kbd" [ 396.594] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so [ 396.594] (II) Module kbd: vendor="X.Org Foundation" [ 396.594] compiled for 1.14.7, module version = 1.8.0 [ 396.594] Module class: X.Org XInput Driver [ 396.594] ABI class: X.Org XInput driver, version 19.1 [ 396.594] (II) Using input driver 'kbd' for 'kbdmux' [ 396.594] (**) kbdmux: always reports core events [ 396.594] (**) kbdmux: always reports core events [ 396.594] (**) Option "Protocol" "standard" [ 396.594] (**) Option "XkbRules" "base" [ 396.594] (**) Option "XkbModel" "pc105" [ 396.594] (**) Option "XkbLayout" "de" [ 396.594] (**) Option "config_info" "devd:kbdmux" [ 396.595] (II) XINPUT: Adding extended input device "kbdmux" (type: KEYBOARD, id 6) [ 396.618] (II) config/devd: kbdmux is enabled, ignoring device atkbd0 [ 396.618] (II) config/devd: adding input device (null) (/dev/sysmouse) [ 396.618] (**) sysmouse: Applying InputClass "Mouse Defaults" [ 396.618] (II) LoadModule: "mouse" [ 396.618] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so [ 396.619] (II) Module mouse: vendor="X.Org Foundation" [ 396.619] compiled for 1.14.7, module version = 1.9.1 [ 396.619] Module class: X.Org XInput Driver [ 396.619] ABI class: X.Org XInput driver, version 19.1 [ 396.619] (II) Using input driver 'mouse' for 'sysmouse' [ 396.619] (**) sysmouse: always reports core events [ 396.619] (**) Option "Device" "/dev/sysmouse" [ 396.619] (==) sysmouse: Protocol: "Auto" [ 396.619] (**) sysmouse: always reports core events [ 396.619] (==) sysmouse: Emulate3Buttons, Emulate3Timeout: 50 [ 396.619] (**) sysmouse: ZAxisMapping: buttons 4 and 5 [ 396.620] (**) sysmouse: Buttons: 5 [ 396.620] (**) Option "config_info" "devd:sysmouse" [ 396.620] (II) XINPUT: Adding extended input device "sysmouse" (type: MOUSE, id 7) [ 396.620] (**) sysmouse: (accel) keeping acceleration scheme 1 [ 396.620] (**) sysmouse: (accel) acceleration profile 0 [ 396.620] (**) sysmouse: (accel) acceleration factor: 2.000 [ 396.620] (**) sysmouse: (accel) acceleration threshold: 4 [ 396.620] (II) sysmouse: SetupAuto: hw.iftype is 4, hw.model is 0 [ 396.620] (II) sysmouse: SetupAuto: protocol is SysMouse [ 396.620] (II) config/devd: device /dev/psm0 already opened [ 434.187] (II) config/devd: terminating backend... [ 434.187] (II) UnloadModule: "mouse" [ 434.188] (II) UnloadModule: "kbd" [ 436.515] (EE) Server terminated successfully (0). Closing log file.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?562BCC9C.2090500>