From owner-freebsd-questions Wed Jun 7 15: 2:15 2000 Delivered-To: freebsd-questions@freebsd.org Received: from charon.gothic.net (charon.gothic.net [209.21.40.32]) by hub.freebsd.org (Postfix) with ESMTP id 1DDD237BEB4 for ; Wed, 7 Jun 2000 15:02:11 -0700 (PDT) (envelope-from fatbob@charon.gothic.net) Received: from charon (fatbob@charon [209.21.40.32]) by charon.gothic.net (8.10.0/8.10.0) with ESMTP id e57Lqua11143 for ; Wed, 7 Jun 2000 14:52:56 -0700 (PDT) Date: Wed, 7 Jun 2000 14:52:55 -0700 (PDT) From: Fatbob To: freebsd-questions@freebsd.org Subject: PCI NICs that use the DEC Tulip driver? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Help! We've got a machine here that's running FreeBSD-2.1.0-RELEASE (yeah, I know), and we need to put two NICs in it. Before you recommend I upgrade or rebuild the kernel, here's the catch... We didn't build the box - we need the software that's on it; it was shipped running that version of FreeBSD; the only Ethernet driver in it is the DEC 21040 Tulip driver. The NIC shipped with it is a DEC 21040. The software itself loads from lkm's (I think, but can't say 100%) - it's for A/V restripe, and we don't have the application's source code.. There is no kernel source on the machine; even if there was, I'm loath to rebuild the kernel for an alternate NIC since that may hose the application in unknown and horrid ways, and that's not an option - a not-working NIC is less problematic than not-working software. I've booted it with /kernel.GENERIC, but the software it's supposed to run doesn't work with that kernel, although all the network drivers are installed. We could contact the vendor, but it will probably take them a while to get us a new kernel with the appropriate drivers. My question is ... can someone recommend PCI 10/100 NICs that use the DEC Tulip driver (the 'de' interface), are still available, and will work with the 21040 driver under FreeBSD-2.1.0? I'm not picky as to model (SMC, Linksys, DEC, etc.) - I just need to find one that works. thanks in advance (and a bit of desperation), Klaus To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message