From owner-freebsd-questions  Wed Dec  2 12:07:08 1998
Return-Path: <owner-freebsd-questions@FreeBSD.ORG>
Received: (from majordom@localhost)
          by hub.freebsd.org (8.8.8/8.8.8) id MAA28207
          for freebsd-questions-outgoing; Wed, 2 Dec 1998 12:07:08 -0800 (PST)
          (envelope-from owner-freebsd-questions@FreeBSD.ORG)
Received: from peanut.readington.com (peanut.readington.com [207.207.198.8])
          by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id MAA28187
          for <freebsd-questions@FreeBSD.ORG>; Wed, 2 Dec 1998 12:06:59 -0800 (PST)
          (envelope-from chrismar@peanut.readington.com)
Received: from localhost (chrismar@localhost)
	by peanut.readington.com (8.9.1/8.8.8) with SMTP id PAA08255;
	Wed, 2 Dec 1998 15:04:27 -0500 (EST)
	(envelope-from chrismar@peanut.readington.com)
Date: Wed, 2 Dec 1998 15:04:27 -0500 (EST)
From: Chris Martino <chrismar@peanut.readington.com>
To: freebsd-questions account <question@namodn.com>
cc: freebsd-questions@FreeBSD.ORG
Subject: Re: Sound.....again! (yamaha OPL3)
In-Reply-To: <Pine.BSF.3.96.981202113313.9427D-100000@namodn.com>
Message-ID: <Pine.BSF.3.96.981202150233.8240A-100000@peanut.readington.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-questions@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.ORG

So, does that mean that I have to add 

device pcm1     at isa? port ? tty irq 10 drq 1 flags 0x0 vector pcmintr

to my kernel config file and re-compile?  

Also, I'm not sure of what to type in the kernel config to turn on that
stuff you mentioned.

Chris

--

Chris Martino
chrismar@readington.com

On Wed, 2 Dec 1998, freebsd-questions account wrote:

> 
> When you use plug n play cards with the pcm driver, the card uses the pcm1
> device, not pcm0 (i know, i know :) although it does not seem that your
> card is assigned to pcm1..
> 
> Did you go into the kernel config (not visual!) and make sure the pnp
> settings are the way you want them? (enabled, irq, port, etc)
> 
> One thing you must do when the card is pcm1, rm the /dev/audio, dsp, dspW,
> etc, and make new symlinks ln -s dsp1 dsp, audio1 audio, as opposed to the
> dsp -> dsp0 like before...
> 
> Do a cat /dev/sndstat and see if the card is successfully detected as
> pcm1..
> 
> -rob
> ( www.namodn.com )
> ( mailto : robert@namodn.com )
> 
> On Wed, 2 Dec 1998, Chris Martino wrote:
> 
> > Over the last couple of days there has been a thread about the yamaha
> > OPL-SA sound card.  I've followed the thread closely as I have a Yamaha
> > OPL3-SA3 sound board.
> > 
> > Now, I followed the various hints to the T, and I'm still unable to get it
> > to work.  Here is the stuff that I have so far theat seems the most
> > promising:
> > 
> > In my kernel config:
> > controller      pnp0
> > device pcm0     at isa? port ? tty irq 10 drq 1 flags 0x0 vector pcmintr
> > 
> > w/ that in there the dmesg shows:
> > Probing for PnP devices:
> > CSN 1 Vendor ID: YMH0800 [0x0008a865] Serial 0xffffffff
> > Probing for devices on the ISA bus:
> > sc0 at 0x60-0x6f irq 1 on motherboard
> > sc0: VGA color <16 virtual consoles, flags=0x0>
> > pcm0 not found at 0xffffffff
> > 
> > Notice how it says it's not found...but I wonder why....what can I do do
> > make it found?
> > 
> > I'll send the pnpinfo to anyone who wants it.
> > 
> > I'm running FreeBSD 2.2.6.
> > 
> > Any suggestions are GREATLY appreaciated.
> > 
> > TIA,
> > Chris
> > 
> > 
> > 
> > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > with "unsubscribe freebsd-questions" in the body of the message
> > 
> 
> 


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message