From owner-freebsd-multimedia Wed Jan 27 15:21:24 1999 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id PAA28968 for freebsd-multimedia-outgoing; Wed, 27 Jan 1999 15:21:24 -0800 (PST) (envelope-from owner-freebsd-multimedia@FreeBSD.ORG) Received: from arthur.caida.org (arthur.caida.org [204.212.46.6]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id PAA28961 for ; Wed, 27 Jan 1999 15:21:22 -0800 (PST) (envelope-from dwm@arthur.caida.org) Received: from arthur.caida.org (localhost.caida.org [127.0.0.1]) by arthur.caida.org (8.9.0/8.9.0.Beta5) with ESMTP id RAA00810; Wed, 27 Jan 1999 17:21:20 -0600 (CST) Message-Id: <199901272321.RAA00810@arthur.caida.org> Location: CAIDA Ann Arbor, MI To: Randy Bush cc: freebsd-multimedia@FreeBSD.ORG Subject: Re: can't get back to luigi on 4.0-current In-reply-to: Message from of Wed Jan 27, 1999 14:49 PST Date: Wed, 27 Jan 1999 18:21:19 -0500 From: Daniel McRobb Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Oh, and clean up your kernel config... you've got conflicting settings using pcm0 and pcm1 (if you ditch pcm1, you can make pcm0 work if you correct your pnp config... but normally folks use pcm1 and not pcm0). Daniel ~~~~~~ > so i had moved my sound card (awe64) from luigi to vox to try and chase the > fxtv problem the other week, until i found that the brooktree driver does > not yet support the hauppauge tuner sound stuff. > > well, i need the mbone tools, and vat seems to want luigi. so i rehacked > the kernel (4.0-current as of 990126) to luigi, i think. kernel config sez > > device pcm0 at isa? port ? tty irq 5 drq 1 flags 0x0 vector pcmintr > > but it is not working. when i run vat or xmix, they syslog the following: > > pcm0: unit not configured, perhaps you want pcm1 ? > > and > > # xmix > Error opening mixer device /dev/mixer: Device not configured > > maybe it is that /kernel.config is not getting run in 4.0? because it has > the > USERCONFIG > pnp 1 0 enable os port0 0x220 port1 0x330 port2 0x388 irq0 5 drq0 1 drq1 5 > pnp 1 1 enable os port0 0x200 > pnp 1 2 enable os port0 0x620 port1 0xa20 port2 0xe20 > quit > which i suspect needs to be run. > > dmesg appended. > > randy > > > > Copyright (c) 1992-1999 FreeBSD Inc. > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > FreeBSD 4.0-CURRENT #0: Wed Jan 27 14:27:50 PST 1999 > root@rip.psg.com:/usr/src/sys/compile/RIP > Timecounter "i8254" frequency 1193182 Hz > Timecounter "TSC" frequency 300683703 Hz > CPU: Pentium II (quarter-micron) (300.68-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x651 Stepping=1 > Features=0x183fbff> > real memory = 134217728 (131072K bytes) > config> quit > avail memory = 127856640 (124860K bytes) > Preloaded elf kernel "kernel" at 0xf02ab000. > ccd0-5: Concatenated disk drivers > Probing for devices on PCI bus 0: > chip0: rev 0x02 on pci0.0.0 > chip1: rev 0x02 on pci0.1.0 > chip2: rev 0x02 on pci0.4.0 > chip3: rev 0x02 on pci0.4.3 > ahc0: tec aic7890/91 Ultra2 SCSI adapter> rev 0x00 int a irq 15 on pci0.6.0 > ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs > fxp0: rev 0x05 int a irq 15 on pci0.9.0 > fxp0: Ethernet address 00:a0:c9:df:c8:4e > bktr0: rev 0x02 int a irq 10 on pci0.10.0 > bti2c0: > iicbb0: on bti2c0 > iicbus0: on iicbb0 master-only > iicsmb0: on iicbus0 > smbus0: on iicsmb0 > smb0: on smbus0 > iic0: on iicbus0 > smbus1: on bti2c0 > smb1: on smbus1 > Hauppauge WinCast/TV, Philips FR1236 NTSC FM tuner, msp3400c stereo. > Probing for devices on PCI bus 1: > vga0: rev 0x00 int a irq 11 on pci1.0.0 > Probing for PnP devices: > CSN 1 Vendor ID: CTL00c3 [0xc3008c0e] Serial 0x1fd0a682 Comp ID: PNPb02f [0x2fb0d041] > pcm1 (SB16pnp > sn 0x1fd0a682) at 0x220-0x22f irq 5 drq 1 flags 0x15 on isa > Probing for devices on the ISA bus: > sc0 on isa > sc0: VGA color <16 virtual consoles, flags=0x0> > atkbdc0 at 0x60-0x6f on motherboard > atkbd0 irq 1 on isa > psm0 irq 12 on isa > psm0: model Generic PS/2 mouse, device ID 0 > sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa > sio0: type 16550A > sio1 at 0x2f8-0x2ff irq 3 on isa > sio1: type 16550A > pcm0 not probed due to drq conflict with pcm1 at 1 > fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa > fdc0: FIFO enabled, 8 bytes threshold > fd0: 1.44MB 3.5in > wl0 at 0x300-0x30f irq 7 on isa > wl0: address 08:00:6a:2b:dd:a7, NWID 0xaaaa > vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa > npx0 on motherboard > npx0: INT 16 interface > Waiting 15 seconds for SCSI devices to settle > changing root device to da0s1a > da1 at ahc0 bus 0 target 1 lun 0 > da1: Fixed Direct Access SCSI-2 device > da1: 80.0MB/s transfers (40.0MHz, offset 15, 16bit), Tagged Queueing Enabled > da1: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C) > da0 at ahc0 bus 0 target 0 lun 0 > da0: Fixed Direct Access SCSI-2 device > da0: 80.0MB/s transfers (40.0MHz, offset 15, 16bit), Tagged Queueing Enabled > da0: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C) > cd0 at ahc0 bus 0 target 4 lun 0 > cd0: Removable CD-ROM SCSI-2 device > cd0: 20.0MB/s transfers (20.0MHz, offset 16) > cd0: Attempt to query device size failed: NOT READY, Medium not present > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-multimedia" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message