Date: Mon, 11 Jul 2005 20:09:55 -0700 (PDT) From: KAYVEN RIESE <kayve@sfsu.edu> To: freebsd-acpi@FreeBSD.org Subject: Re: can't see nuthin' Message-ID: <Pine.GSO.4.44.0507112008530.12063-100000@libra.sfsu.edu> In-Reply-To: <Pine.GSO.4.44.0507112007310.12063-100000@libra.sfsu.edu> References: <Pine.GSO.4.44.0507112007310.12063-100000@libra.sfsu.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 11 Jul 2005, KAYVEN RIESE wrote: > > i can't see any of my devices with freeBSD 6.0 umm.. > > tell me what to tell you because i have no clue. okay.. i kayvetop# ls /dev/ acd0 consolectl lpt0.ctl ptyp6 ttyv4 acpi ctty mdctl random ttyv5 ad0 cuaa0 mem stderr ttyv6 ad0s1 cuaia0 net stdin ttyv7 ad0s1a cuala0 net1 stdout ttyv8 ad0s1c devctl net2 sysmouse ttyv9 ad0s2 devstat net3 ttyd0 ttyva ad0s2a fd net4 ttyid0 ttyvb ad0s2c fido network ttyld0 ttyvc ad0s3 fw0 nfs4 ttyp0 ttyvd ad0s3b fw0.0 null ttyp1 ttyve ad0s3c fwmem0 pci ttyp2 ttyvf ad0s4 fwmem0.0 ppi0 ttyp3 ums0 agpgart geom.ctl psm0 ttyp4 urandom apm io ptyp0 ttyp5 usb ata kbd0 ptyp1 ttyp6 usb0 atkbd0 klog ptyp2 ttyv0 usb1 bpf0 kmem ptyp3 ttyv1 usb2 bpsm0 log ptyp4 ttyv2 xpt0 console lpt0 ptyp5 ttyv3 zero kayvetop# here is the complete output for dmesg Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-CURRENT-SNAP004 #0: Thu Jun 2 06:12:51 UTC 2005 root@wv1u.samsco.home:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) M processor 1.73GHz (600.03-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8 Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> Features2=0x180<EST,TM2> real memory = 536084480 (511 MB) avail memory = 515219456 (491 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <A M I OEMRSDT> on motherboard ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.SBRG.EC0_.ACS_] (Node 0xc1ab3960), AE_NOT_EXIST ACPI-1304: *** Error: Method execution failed [\\_SB_.AC__._INI] (Node 0xc1ab7840), AE_NOT_EXIST ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.SBRG.EC0_.BATS] (Node 0xc1ab3940), AE_NOT_EXIST ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT0._STA] (Node 0xc1ab7c40), AE_NOT_EXIST ACPI-0239: *** Error: Method execution failed [\\_SB_.BAT0._STA] (Node 0xc1ab7c40), AE_NOT_EXIST acpi0: Power Button (fixed) acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0 pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0 pci_link1: <ACPI PCI Link LNKB> irq 4 on acpi0 pci_link2: <ACPI PCI Link LNKC> irq 10 on acpi0 pci_link3: <ACPI PCI Link LNKD> irq 5 on acpi0 pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0 pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0 pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0 pci_link7: <ACPI PCI Link LNKH> irq 10 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82855 host to AGP bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xe800-0xe81f irq 11 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xe880-0xe89f irq 5 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xec00-0xec1f irq 10 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xffaffc00-0xffafffff irq 10 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <EHCI (generic) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <EHCI (generic) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 bge0: <Broadcom BCM5788 Gigabit Ethernet, ASIC rev. 0x3003> mem 0xff9f0000-0xff9fffff irq 4 at device 0.0 on pci2 miibus0: <MII bus> on bge0 brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:11:d8:22:c9:91 cbb0: <RF5C476 PCI-CardBus Bridge> at device 1.0 on pci2 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb1: <RF5C476 PCI-CardBus Bridge> at device 1.1 on pci2 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 fwohci0: <Ricoh R5C552> mem 0xff9ef800-0xff9effff irq 10 at device 1.2 on pci2 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:e0:18:00:03:26:4c:e9 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:e0:18:26:4c:e9 fwe0: Ethernet address: 02:e0:18:26:4c:e9 fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pci2: <network> at device 2.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <multimedia, audio> at device 31.5 (no driver attached) pci0: <simple comms, generic modem> at device 31.6 (no driver attached) acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_cmbat1: <Control Method Battery> on acpi0 acpi_button1: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 sio0: configured irq 3 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 port 0x2f8-0x2ff irq 3 drq 1 flags 0x10 on acpi0 sio0: type 16550A ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 pmtimer0 on isa0 ppi0: <Parallel I/O> on ppbus0 pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: ACROX Resolution 400/600/800 Changeable Combo Mouse, rev 1.00/5.50, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounter "TSC" frequency 600025330 Hz quality 800 Timecounters tick every 1.000 msec ad0: 57231MB <HTS548060M9AT00 MGBOA53A> at ata0-master UDMA100 ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT0._BST] (Node 0xc1ab7c60), AE_AML_NO_RETURN_VALUE acd0: DVDR <TSSTcorpCD/DVDW TS-L532A/TC51> at ata1-master UDMA33 pccard0: No config entry could be allocated. ATA PseudoRAID loaded Trying to mount root from ufs:/dev/ad0s1a ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT0._BST] (Node 0xc1ab7c60), AE_AML_NO_RETURN_VALUE ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT0._BST] (Node 0xc1ab7c60), AE_AML_NO_RETURN_VALUE ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT0._BST] (Node 0xc1ab7c60), AE_AML_NO_RETURN_VALUE ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT0._BST] (Node 0xc1ab7c60), AE_AML_NO_RETURN_VALUE ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT0._BST] (Node 0xc1ab7c60), AE_AML_NO_RETURN_VALUE ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT0._BST] (Node 0xc1ab7c60), AE_AML_NO_RETURN_VALUE
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.4.44.0507112008530.12063-100000>