Date: Tue, 17 Mar 2015 02:10:20 +0000 From: bugzilla-noreply@freebsd.org To: freebsd-usb@FreeBSD.org Subject: [Bug 198647] MX-ES USB Drive by Mach Xtreme ILLEGAL REQUEST asc:21, 0 (Logical block address out of range) Message-ID: <bug-198647-17@https.bugs.freebsd.org/bugzilla/>
next in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=198647 Bug ID: 198647 Summary: MX-ES USB Drive by Mach Xtreme ILLEGAL REQUEST asc:21,0 (Logical block address out of range) Product: Base System Version: 11.0-CURRENT Hardware: Any OS: Any Status: New Severity: Affects Some People Priority: --- Component: usb Assignee: freebsd-usb@FreeBSD.org Reporter: cmbaker82@gmail.com I am trying to install FreeBSD 9.3, also tried 10.1 and 11.0, to an mx-ex 8gb flash drive. Here is a link to the specifications: http://mx-technology.com/h5/en/flash2.php?sid=38 It is a usb3 device, but plugged into usb2 ports. If I go to the shell and unplug the device then plug it back in here are the errors I get (partial, some scroll off screen): [CODE](da0:umass-sim0:0:0:0): Error 22, Unretryable error (da0:umass-sim0:0:0:0): Read(10). CDB: 28 00 00 ee 4f ff 00 00 01 00 (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI status Check Condition (da0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range) [/CODE] and then it repeats the same error, I think I saw some flash by that said Write() instead of Read(10) during one of my attempts. I have tried reinitializing the disk using windows disk manager which seemed to work fine. Drive behaves as expected in my windows machines and linux CentOS. This has happened both on a Dell R610 and a HP touchsmart tx2 laptop. The dell R610 works with FreeBSD except for this memory stick. If I drop to shell during installation I can get the following information: [CODE]camcontrol inquiry da1: pass3: <MX MXUB3SES-8GB 1.00> Removable Direct Access SCSI-6 device pass3: Serial Number 000000000000000133 pass3: 40.000MB/s transfers dmesg | grep ^da1 da1: at umass-sim1 bus 1 scbus 4 target 0 lun 0 da1: <MX MXUB3SES-8GB 1.00> Removable Direct Access SCSI-6 device da1: Serial Number 000000000000000133 da1: 40.000MB/s transfers da1: 7626MB (15618048 512 byte secotrs: 255H 63S/T 972C) da1: quirks=0x2<NO_6_BYTE> [/CODE] Seems similar, but different to bug 194062 If from shell before trying to install I do a [CMD]sysctl kern.cam.da.1.minimum_cmd_size=16[/CMD] then I am able to get farther showing the "please review the disk setup" screen, and instead of giving read errors it gives the following error after hitting commit: [CODE]write(16). cdb: 8a 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 cam status: ccb request completed with an error error 5, retries exhausted[/CODE] -- You are receiving this mail because: You are the assignee for the bug.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-198647-17>