Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 12 Mar 2003 16:41:14 +1100
From:      JacobRhoden <jrhoden@unimelb.edu.au>
To:        freebsd-questions@freebsd.org
Subject:   usb not working on intel motherboard
Message-ID:  <200303121641.14279.jrhoden@unimelb.edu.au>

next in thread | raw e-mail | index | archive | help
Hi, 

Hi,

It seems that no matter what I do I can not get usb devices to even be 
recognised. (Yes usbd is running).  Relevant DMESG and usbd error messages 
below. Does anyone have any ideas? (I have tried usb mouse, keyboard, and 
camera).

Thanks,
Jacob

FreeBSD elkanah.its.unimelb.edu.au 4.8-RC FreeBSD 4.8-RC #1: Wed Mar 12 
15:00:01 EST 2003     
jrhoden@elkanah.its.unimelb.edu.au:/usr/obj/usr/src/sys/JOAB2  i386

uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xe800-0xe81f irq 11 
at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xe880-0xe89f irq 5 at 
device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xec00-0xec1f irq 9 at 
device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered

And verbose debug output from usbd:

%/usr/sbin/usbd -d -vv -f /dev/usb0 -f /dev/usb1 -f /dev/usb2
usbd: opened /dev/usb0
usbd: opened /dev/usb1
usbd: opened /dev/usb2
usbd: reading configuration file /etc/usbd.conf
usbd: action 1: ActiveWire board, firmware download
  vndr=0x0854 prdct=0x0100 rlse=0x0000
  attach='/usr/local/bin/ezdownload -f 
/usr/local/share/usb/firmware/0854.0100.0_01.hex ${DEVNAME}'
usbd: action 2: Entrega Serial with UART
  vndr=0x1645 prdct=0x8001 rlse=0x0101
  attach='/usr/sbin/ezdownload -v -f /usr/share/usb/firmware/1645.8001.0101 
/dev/${DEVNAME}'
usbd: action 3: USB ethernet
  devname: [ack]ue[0-9]+
  attach='dhclient ${DEVNAME}'
  detach='killall dhclient'
usbd: action 4: Mouse
  devname: ums[0-9]+
  attach='/usr/sbin/moused -p /dev/${DEVNAME} -I 
/var/run/moused.${DEVNAME}.pid'
usbd: action 5: USB device
usbd: 5 actions
usbd: opened /dev/usb
usbd: doing timeout discovery on /dev/usb0
usbd: doing timeout discovery on /dev/usb1
usbd: doing timeout discovery on /dev/usb2
usbd: processing event queue due to timeout on /dev/usb
usbd: doing timeout discovery on /dev/usb0
usbd: doing timeout discovery on /dev/usb1
usbd: doing timeout discovery on /dev/usb2
usbd: processing event queue due to timeout on /dev/usb


-- 
Jacob Rhoden            Phone: +61 3 8344 6102
ITS Division            Email: jrhoden@unimelb.edu.au
Melbourne University   Mobile: +61 403 788 386

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200303121641.14279.jrhoden>