Date: Thu, 5 Feb 2009 17:03:34 GMT From: Anton Shterenlikht <mexas@bristol.ac.uk> To: FreeBSD-gnats-submit@FreeBSD.org Subject: i386/131426: hald makes cdrom fail Message-ID: <200902051703.n15H3YqE000804@mech-aslap33.men.bris.ac.uk> Resent-Message-ID: <200902051710.n15HA1Fl087995@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 131426
>Category: i386
>Synopsis: hald makes cdrom fail
>Confidential: no
>Severity: serious
>Priority: high
>Responsible: freebsd-i386
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Thu Feb 05 17:10:01 UTC 2009
>Closed-Date:
>Last-Modified:
>Originator: Anton Shterenlikht
>Release: FreeBSD 7.1-STABLE i386
>Organization:
Bristol University, UK
>Environment:
System: FreeBSD mech-aslap33.men.bris.ac.uk 7.1-STABLE FreeBSD 7.1-STABLE #0: Sat Jan 31 14:31:50 GMT 2009 mexas@mech-aslap33.men.bris.ac.uk:/usr/obj/usr/src/sys/ARMADA1700 i386
>Description:
This is an old laptop Compaq Armada 1700.
adding hald_enable="YES" to /etc/rc.conf makes cdrom fail straight after boot
with
acd0: FAILURE - unknown CMD (0x03) ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0
x00 0x00
The error message is repeated approx. every 2 seconds indefinitely.
After rebooting without hald_enable, all is fine again, checked 3-4 times.
hald_enable="YES" is required to make mouse and keyboard detected in X, so
the problem results in unusable X.
#cat dmesg
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-STABLE #0: Sat Jan 31 14:31:50 GMT 2009
mexas@mech-aslap33.men.bris.ac.uk:/usr/obj/usr/src/sys/ARMADA1700
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (233.34-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 167772160 (160 MB)
avail memory = 154570752 (147 MB)
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1020-0x102f at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1000-0x101f irq 11 at device 7.2 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge> at device 7.3 (no driver attached)
vgapci0: <VGA-compatible display> mem 0x40000000-0x40ffffff at device 8.0 on pci0
cbb0: <TI1220 PCI-CardBus Bridge> mem 0x7fffe000-0x7fffefff irq 11 at device 17.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [ITHREAD]
cbb1: <TI1220 PCI-CardBus Bridge> mem 0x7ffff000-0x7fffffff irq 11 at device 17.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [ITHREAD]
cpu0 on motherboard
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
sbc0: <ESS ES1869 (Compaq OEM)> at port 0x230-0x23f,0x388-0x38b,0x300-0x301 irq 5 drq 0,1 pnpid CPQb0ac on isa0
sbc0: [GIANT-LOCKED]
sbc0: [ITHREAD]
pcm0: <ESS 18xx DSP> on sbc0
pcm0: [GIANT-LOCKED]
pcm0: [ITHREAD]
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0c02> can't assign resources (memory)
Timecounter "TSC" frequency 233343487 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 38154MB <Seagate ST940815A 3.ALD> at ata0-master UDMA33
rl0: <RealTek 8139 10/100BaseTX> port 0x1100-0x11ff mem 0x88000000-0x880001ff irq 11 at device 0.0 on cardbus0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:02:44:7b:52:b8
rl0: [ITHREAD]
acd0: CDROM <UJDA150/1.02> at ata0-slave PIO4
Trying to mount root from ufs:/dev/ad0s1a
acd0: FAILURE - unknown CMD (0x03) ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x00
acd0: FAILURE - unknown CMD (0x03) ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x00
acd0: FAILURE - unknown CMD (0x03) ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x00
rl0: watchdog timeout
acd0: FAILURE - unknown CMD (0x03) ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x00
acd0: FAILURE - unknown CMD (0x03) ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x00
acd0: FAILURE - unknown CMD (0x03) ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x00
acd0: FAILURE - unknown CMD (0x03) ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x00
acd0: FAILURE - unknown CMD (0x03) ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x00
acd0: FAILURE - unknown CMD (0x03) ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x00
acd0: FAILURE - unknown CMD (0x03) ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x00
acd0: FAILURE - unknown CMD (0x03) ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x00
acd0: FAILURE - unknown CMD (0x03) ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x00
acd0: FAILURE - unknown CMD (0x03) ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x00
acd0: FAILURE - unknown CMD (0x03) ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x00
acd0: FAILURE - unknown CMD (0x03) ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x00
acd0: FAILURE - unknown CMD (0x03) ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x00
acd0: FAILURE - unknown CMD (0x03) ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x00
>How-To-Repeat:
On Compaq Armada 1700 laptop, FBSD-7.1-stable add hald_enable="YES" to
/etc/rc.conf and reboot
>Fix:
no idea, I think hal port is buggy. I think it is giving me problems on
8.0-current as well.
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200902051703.n15H3YqE000804>