Date: Wed, 18 Oct 2006 18:21:53 +0200 From: giannidoe@mac.com To: freebsd-questions@freebsd.org Subject: Newbie: PCI modem grief Message-ID: <96125E1C-C802-436A-96E7-7BBBC0B69E25@mac.com>
next in thread | raw e-mail | index | archive | help
I've got 3 MultiTech PCI modems (MT5634ZPX-PCI) which are detected
correctly at boot, I can issue commands and query them with minicom
however any attempt at dialling results in NO DIALTONE even though
the line is working. I think it's something to do with shared
interrupts as if I take out 2 modems and place the remaining one in a
certain PCI slot it works fine.
dmesg reports similar message for each:
sio0: configured irq 19 not in bitmap of probed irqs 0
sio0: port may not be enabled
(full text below)
I have searched around and seems that disabling PnP OS in the BIOS
may help, trouble is my Dell PowerEdge 400SC has no option for
turning off PnP OS.
I'd really appreciate some suggestions.
Thanks
Gianni
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-PRERELEASE #2: Mon Oct 16 06:47:01 CEST 2006
root@apoc.proiv-solutions.com:/usr/obj/usr/src/sys/APOC
ACPI APIC Table: <DELL PE400SC>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 2.40GHz (2394.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE
,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4400<CNTX-ID,<b14>>
real memory = 133644288 (127 MB)
avail memory = 121196544 (115 MB)
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <DELL PE400SC> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82875P host to AGP bridge> mem 0xf0000000-0xf7ffffff at
device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci0: <serial bus, USB> at device 29.0 (no driver attached)
pci0: <serial bus, USB> at device 29.1 (no driver attached)
pci0: <serial bus, USB> at device 29.2 (no driver attached)
pci0: <serial bus, USB> at device 29.3 (no driver attached)
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <display, VGA> at device 0.0 (no driver attached)
sio0: configured irq 22 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <Lucent kermit based PCI Modem> port 0xd800-0xd8ff,
0xd900-0xd9ff,0xd5a8-0xd5af mem 0xfe9ded00-0xfe9dedff irq 22 at
device 1.0 on pci2
sio0: moving to sio4
sio4: type 16550A
sio0: configured irq 17 not in bitmap of probed irqs 0
sio0: port may not be enabled
can't re-use a leaf (%desc)!
can't re-use a leaf (%driver)!
can't re-use a leaf (%location)!
can't re-use a leaf (%pnpinfo)!
can't re-use a leaf (%parent)!
sio0: <Lucent kermit based PCI Modem> port 0xda00-0xdaff,
0xdc00-0xdcff,0xd5b0-0xd5b7 mem 0xfe9dee00-0xfe9deeff irq 17 at
device 2.0 on pci2
sio0: moving to sio5
sio5: type 16550A
sio0: configured irq 19 not in bitmap of probed irqs 0
sio0: port may not be enabled
can't re-use a leaf (%desc)!
can't re-use a leaf (%driver)!
can't re-use a leaf (%location)!
can't re-use a leaf (%pnpinfo)!
can't re-use a leaf (%parent)!
sio0: <Lucent kermit based PCI Modem> port 0xdd00-0xddff,
0xde00-0xdeff,0xd5b8-0xd5bf mem 0xfe9def00-0xfe9defff irq 19 at
device 3.0 on pci2
sio0: moving to sio6
sio6: type 16550A
em0: <Intel(R) PRO/1000 Network Connection Version - 6.1.4> port
0xd5c0-0xd5ff mem 0xfe9e0000-0xfe9fffff irq 18 at device 12.0 on pci2
em0: Ethernet address: 00:0c:f1:9d:5b:fa
em0: [FAST]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf mem
0xfebffc00-0xfebfffff irq 18 at device 31.1 on p
ci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH5 SATA150 controller> port
0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfea0-0xfeaf
irq 18 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
can't re-use a leaf (%desc)!
can't re-use a leaf (%driver)!
can't re-use a leaf (%location)!
can't re-use a leaf (%pnpinfo)!
can't re-use a leaf (%parent)!
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7
on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,
0xc9800-0xd5fff,0xd6000-0xd7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
Timecounter "TSC" frequency 2394015032 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 76319MB <Seagate ST380011A 8.54> at ata0-master UDMA100
acd0: CDROM <GCR-8481B/1.06> at ata1-master UDMA33
ast0: TAPE <Seagate STT3401A/309I> at ata1-slave PIO3
Trying to mount root from ufs:/dev/ad0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?96125E1C-C802-436A-96E7-7BBBC0B69E25>