From owner-freebsd-current Sun Oct 17 21:18:28 1999 Delivered-To: freebsd-current@freebsd.org Received: from sasami.jurai.net (sasami.jurai.net [63.67.141.99]) by hub.freebsd.org (Postfix) with ESMTP id B5DCB14A09 for ; Sun, 17 Oct 1999 21:18:24 -0700 (PDT) (envelope-from winter@jurai.net) Received: from localhost (winter@localhost) by sasami.jurai.net (8.8.8/8.8.7) with ESMTP id AAA20424; Mon, 18 Oct 1999 00:18:07 -0400 (EDT) Date: Mon, 18 Oct 1999 00:18:06 -0400 (EDT) From: "Matthew N. Dodd" To: Andreas Klemm Cc: current@FreeBSD.ORG Subject: Re: -current problem: Network cards doesn't run In-Reply-To: <19991017005544.B973@titan.klemm.gtn.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sun, 17 Oct 1999, Andreas Klemm wrote: > See ed0.... > When running a current kernel of some days ago, no problems. > Were there perhaps changes in the last days that introduce > this, that some NICs doesn't run ? > Even the xl0 interface didn't run (DMZ). Ping to hosts in > internet didn't succeed. I believe I've tracked this down. I'll commit a fix once I've verified it. > Copyright (c) 1992-1999 The FreeBSD Project. > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > FreeBSD 4.0-CURRENT #0: Sun Oct 17 00:40:49 CEST 1999 > root@titan.klemm.gtn.com:/usr/src/sys/compile/TITAN > Timecounter "i8254" frequency 1193182 Hz > CPU: Pentium Pro (199.43-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x619 Stepping = 9 > Features=0xfbff > real memory = 159383552 (155648K bytes) > avail memory = 151044096 (147504K bytes) > Programming 24 pins in IOAPIC #0 > FreeBSD/SMP: Multiprocessor motherboard > cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 > cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 > io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 > Preloaded elf kernel "kernel" at 0xc030c000. > Pentium Pro MTRR support enabled > ccd0-3: Concatenated disk drivers > npx0: on motherboard > npx0: INT 16 interface > pcib0: on motherboard > pci0: on pcib0 > isab0: at device 7.0 on pci0 > isa0: on isab0 > chip1: at device 7.1 on pci0 > vga-pci0: at device 10.0 on pci0 > xl0: <3Com 3c900-COMBO Etherlink XL> irq 19 at device 11.0 on pci0 > xl0: Ethernet address: 00:60:97:aa:3a:db > xl0: selecting 10baseT transceiver, half duplex > pci0: unknown card (vendor=0x1102, dev=0x0002) at 12.0 irq 18 > pci0: unknown card (vendor=0x1102, dev=0x7002) at 12.1 > ahc0: irq 17 at device 13.0 on pci0 > ahc0: aic7880 Single Channel A, SCSI Id=7, 16/255 SCBs > ahc1: irq 16 at device 14.0 on pci0 > ahc1: aic7880 Single Channel A, SCSI Id=7, 16/255 SCBs > fdc0: at port 0x3f0-0x3f7 irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: at port 0x60-0x6f on isa0 > atkbd0: irq 1 on atkbdc0 > psm0: irq 12 on atkbdc0 > psm0: model Generic PS/2 mouse, device ID 0 > vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > sc0: on isa0 > sc0: VGA <4 virtual consoles, flags=0x200> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > ppc0 at port 0x378-0x37f irq 7 flags 0x40 on isa0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/15 bytes threshold > plip0: on ppbus 0 > lpt0: on ppbus 0 > lpt0: Interrupt-driven port > ppi0: on ppbus 0 > ed0 at port 0x280-0x29f iomem 0xd8000-0xdbfff irq 10 on isa0 > ed0: address 00:00:c0:5a:98:2a, type WD8013EPC (16 bit) > APIC_IO: Testing 8254 interrupt delivery > APIC_IO: routing 8254 via pin 2 > IP packet filtering initialized, divert enabled, rule-based forwarding enabled, logging limited to 100 packets/entry by default > DUMMYNET initialized (990811) > Waiting 8 seconds for SCSI devices to settle > SMP: AP CPU #1 Launched! > Creating DISK da0 > Creating DISK da1 > Creating DISK da2 > Creating DISK da3 > sa0 at ahc1 bus 0 target 4 lun 0 > sa0: Removable Sequential Access SCSI-2 device > sa0: 4.807MB/s transfers (4.807MHz, offset 8) > Creating DISK cd0 > Creating DISK cd1 > changing root device to da0s2a > cd1 at ahc1 bus 0 target 5 lun 0 > cd1: Removable CD-ROM SCSI-2 device > cd1: 10.000MB/s transfers (10.000MHz, offset 8) > cd1: Attempt to query device size failed: NOT READY, Medium not present > cd0 at ahc0 bus 0 target 6 lun 0 > cd0: Removable CD-ROM SCSI-2 device > cd0: 10.000MB/s transfers (10.000MHz, offset 15) > cd0: Attempt to query device size failed: NOT READY, Medium not present > da3 at ahc0 bus 0 target 3 lun 0 > da3: Fixed Direct Access SCSI-2 device > da3: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled > da3: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C) > da1 at ahc0 bus 0 target 1 lun 0 > da1: Fixed Direct Access SCSI-2 device > da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled > da1: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C) > da0 at ahc0 bus 0 target 0 lun 0 > da0: Fixed Direct Access SCSI-2 device > da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled > da0: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C) > da2 at ahc0 bus 0 target 2 lun 0 > da2: Fixed Direct Access SCSI-2 device > da2: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled > da2: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C) > ed0: remote transmit DMA failed to complete > ^^^^ > ed0: NIC memory corrupt - invalid packet length 11564 > ^^^^ > xl0: promiscuous mode enabled > > > -- | Matthew N. Dodd | '78 Datsun 280Z | '75 Volvo 164E | FreeBSD/NetBSD | | winter@jurai.net | 2 x '84 Volvo 245DL | ix86,sparc,pmax | | http://www.jurai.net/~winter | This Space For Rent | ISO8802.5 4ever | To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message