Date: Thu, 29 Jan 1998 19:00:27 -0800 (PST) From: Dave Smith <dpsmith@xoom.com> To: freebsd-questions@FreeBSD.ORG Subject: Problem with Digi PC/Xem ISA boards Message-ID: <Pine.BSF.3.96.980129184807.28249E-200000@mail1.xoom.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
I followed the man page on dgb but I still can't get
the two Digi PC/Xem ISA boards in our terminal server
FreeBSD 2.2.5 to work.
In the kernel config file I have:
device dgb0 at isa? tty port 0x324 iomem 0xfc0000 iosiz ?
device dgb1 at isa? tty port 0x304 iomem 0xf40000 iosiz ?
In the machine BIOS - Chipset Features Setup - I set
Memory Hole At 15M-16M: Enabled
dmesg reports:
dgb0: PC/Xi 512K
dgb0 at 0x324-0x327 maddr 0xfc0000 msize 524288 on isa
dgb0: 2nd reset failed
dgb1: PC/Xi 512K
dgb1 at 0x304-0x307 maddr 0xf40000 msize 524288 on isa
dbg1: 2nd reset failed
The man page suggests that this indicates 'Problems with hardware'.
Help.
I've attached the full output from dmesg.
I set the memory addresses on the two digiboards to 304 and 324 by
flicking the dipswitches as their website indicates.
Attached to each digiboard is one Digi PORTS/16em module.
All help, suggestions, etc will be much appreciated.
Thanks,
Dave.
--
dpsmith@xoom.com
[-- Attachment #2 --]
Copyright (c) 1992-1997 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 2.2.5-RELEASE #0: Thu Jan 29 18:09:56 PST 1998
root@trmsrvr1.xoom.com:/usr/src/sys/compile/TRMSRVR1
CPU: Pentium Pro (233.86-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x634 Stepping=4
Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,<b11>,MTRR,PGE,MCA,CMOV>
real memory = 15728640 (15360K bytes)
avail memory = 13516800 (13200K bytes)
Probing for devices on PCI bus 0:
chip0 <generic PCI bridge (vendor=8086 device=7180 subclass=0)> rev 3 on pci0:0
chip1 <generic PCI bridge (vendor=8086 device=7181 subclass=4)> rev 3 on pci0:1
chip2 <generic PCI bridge (vendor=8086 device=7110 subclass=1)> rev 1 on pci0:4:0
pci0:4:1: Intel Corporation, device=0x7111, class=storage (ide) [no driver assigned]
pci0:4:2: Intel Corporation, device=0x7112, class=0x0c, subclass=0x03 int d irq 10 [no driver assigned]
chip3 <generic PCI bridge (vendor=8086 device=7113 subclass=128)> rev 1 on pci0:4:3
ahc0 <Adaptec aic7880 Ultra SCSI host adapter> rev 0 int a irq 10 on pci0:6
ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
ahc0 waiting for scsi devices to settle
(ahc0:0:0): "SEAGATE ST19171N 0024" type 0 fixed SCSI 2
sd0(ahc0:0:0): Direct-Access 8683MB (17783112 512 byte sectors)
fxp0 <Intel EtherExpress Pro 10/100B Ethernet> rev 4 int a irq 11 on pci0:11
fxp0: Ethernet address 00:a0:c9:8d:32:89
vga0 <VGA-compatible display device> rev 0 on pci0:12
Probing for devices on PCI bus 1:
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
dgb0: PC/Xi 512K
dgb0 at 0x324-0x327 maddr 0xfc0000 msize 524288 on isa
dgb0: 2nd reset failed
dgb1: PC/Xi 512K
dgb1 at 0x304-0x307 maddr 0xf40000 msize 524288 on isa
dgb1: 2nd reset failed
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
npx0 flags 0x1 on motherboard
npx0: INT 16 interface
changing root device to sd0a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.980129184807.28249E-200000>