Date: Mon, 17 Aug 2009 15:30:51 -0700 From: Pyun YongHyeon <pyunyh@gmail.com> To: Marius Strobl <marius@alchemy.franken.de> Cc: Christian Ramseyer <rc@networkz.ch>, freebsd-sparc64@freebsd.org Subject: Re: Audio on Sunblade 100 Message-ID: <20090817223051.GB1369@michelle.cdnetworks.com> In-Reply-To: <20090817215612.GB75477@alchemy.franken.de> References: <4A7C6B50.3070503@networkz.ch> <20090817205340.GA75477@alchemy.franken.de> <20090817215612.GB75477@alchemy.franken.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Aug 17, 2009 at 11:56:12PM +0200, Marius Strobl wrote: > On Mon, Aug 17, 2009 at 10:53:40PM +0200, Marius Strobl wrote: > > On Fri, Aug 07, 2009 at 07:58:40PM +0200, Christian Ramseyer wrote: > > > Hi > > > > > > I'm trying to get sound on a Sunblade 100 with 7.2R. I've added > > > > > > device sound > > > device snd_t4dwave > > > > > > to the kernel and recompiled. pciconf shows an attached driver: > > > > > > pcm0@pci0:0:8:0: class=0x040100 card=0x545110b9 chip=0x545110b9 > > > rev=0x01 hdr=0x00 > > > vendor = 'Acer Labs Incorporated (ALi/ULi)' > > > device = 'ALI M5451 PCI AC-Link Controller Audio Device' > > > class = multimedia > > > subclass = audio > > > > > > However, there are errors in dmesg: > > > > > > pcm0: <Acer Labs M5451> port 0x900-0x9ff mem 0x424000-0x424fff at device > > > 8.0 on pci0 > > > pcm0: <Analog Devices AD1881A AC97 Codec> > > > pcm0: [GIANT-LOCKED] > > > pcm0: [ITHREAD] > > > pcm0: chn_init(pcm0:record:dsp0.r0) failed: err = 19 > > > pcm0: pcm_chn_create(trrchan, -1, 0xfffff80001370800) failed > > > pcm0: chn_init(pcm0:play:dsp0.p0) failed: err = 19 > > > pcm0: pcm_chn_create(trpchan, 1, 0xfffff80001370800) failed > > > > > > I've also found this message from 2006: > > > http://lists.freebsd.org/mailman/htdig/freebsd-sparc64/2006-June/004168.html > > > > > > So, am I just doing something wrong or are there problems with 5451 > > > audio on SPARC? I see that the release notes only list i386 and amd64 as > > > architectures for the t4dwave driver. > > > > > > By the way, thanks a lot for all the work your guys are doing in general > > > and for the SPARC port in particular. I'm currently trying BSD for the > > > first time in my life and I like it a lot. It runs surprisingly well on > > > this outdated platform. > > > > > > > Could you (or any other Blade 100 user) please give the following > > patch at try? > > http://people.freebsd.org/~marius/t4dwave_sparc64_32-bit.diff 404 > > This gets at least the line-out of the M5451 in my Blade 1500 > > working (I've no idea whether its internal speaker is also > > connected to the sound chip like for example in a Blade 1000 > > and thus supposed to also work or just to a PC-style beeper, > > the firmware at least makes it beep that way...), but which > > also has a newer revision of this chip. > > > > Looks like I've spoken to soon; it only works when it happens > to get certain buffer addresses, otherwise nothing is played > and the interrupt times out (which according to google isn't > a sparc64 specific problem). This probably means that some > bus_dma(9) parameters are incorrect... > Since I couldn't get the patch I don't know what it does, but the PCI trident 4D wave NX hardware I had surely had DMA address limitations where MSB 2bits of LBA register are used as other purposes. I don't know 4D wave compatible controller on Blade 100 removed this limitation. Marius, does the DVMA base address of blade 100 is lower than 1GB?
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090817223051.GB1369>