Date: Wed, 24 Feb 1999 16:38:28 GMT From: dimitris c dracopoulos <dimitris.dracopoulos@sbu.ac.uk> To: freebsd-questions@freebsd.org Subject: make of kernel failure Message-ID: <9902241638.AA10187@CSDAlpha1.sbu.ac.uk>
next in thread | raw e-mail | index | archive | help
Hi, I have been trying to recompile kernel but "make" fails giving me: loading kernel ioconf.o: Undefined symbol `_sscapeintr' referenced from data segment *** Error code 1 I am using the REL 3.0 (November) and the following config file. Could you please help? Dimitris Dracopoulos ---- # # MYKERNEL -- Generic machine with WD/AHx/NCR/BTx family disks # # For more information read the handbook part System Administration -> # Configuring the FreeBSD Kernel -> The Configuration File. # The handbook is available in /usr/share/doc/handbook or online as # latest version from the FreeBSD World Wide Web server # <URL:http://www.FreeBSD.ORG/>; # # An exhaustive list of options and more detailed explanations of the # device lines is present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $Id: GENERIC,v 1.125 1998/10/16 01:30:11 obrien Exp $ machine "i386" #cpu "I386_CPU" #cpu "I486_CPU" cpu "I586_CPU" cpu "I686_CPU" ident MYKERNEL maxusers 32 #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MFS_ROOT #MFS usable as root device, "MFS" req'ed options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, "NFS" req'ed #options MSDOSFS #MSDOS Filesystem #options "CD9660" #ISO 9660 Filesystem #options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] #options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor config kernel root on wd0 controller isa0 controller eisa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 # Unless you know very well what you're doing, leave ft0 at drive 2, or # remove the line entirely if you don't need it. Trying to configure # it on another unit might cause surprises, see PR kern/7176. tape ft0 at fdc0 drive 2 options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device wcd0 #IDE CD-ROM device wfd0 #IDE Floppy (e.g. LS-120) # A single entry for any of these controllers (ncr, ahb, ahc, amd) is # sufficient for any number of installed devices. #controller ncr0 #controller amd0 #controller ahb0 #controller ahc0 #controller isp0 # This controller offers a number of configuration options, too many to # document here - see the LINT file in this directory and look up the # dpt0 entry there for much fuller documentation on this. #controller dpt0 #controller adv0 at isa? port ? cam irq ? #controller adw0 #controller bt0 at isa? port ? cam irq ? #controller aha0 at isa? port ? cam irq ? #controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr #controller aic0 at isa? port 0x340 bio irq 11 vector aicintr #controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr #controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr #controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr #controller scbus0 #device da0 #device sa0 #device pass0 #device cd0 #Only need one of these, the code dynamically grows #device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr #device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr #controller matcd0 at isa? port 0x230 bio #device scd0 at isa? port 0x230 bio # Enable PnP support in the kernel. This allows you to automaticly # attach to PnP cards for drivers that support it and allows you to # configure cards from USERCONFIG. See pnp(4) for more info. controller pnp0 # syscons is the default console driver, resembling an SCO console device sc0 at isa? port "IO_KBD" conflicts tty irq 1 vector scintr # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? port "IO_KBD" conflicts tty irq 1 vector pcrint #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std device npx0 at isa? port "IO_NPX" irq 13 vector npxintr # # Laptop support (see LINT for more options) # #device apm0 at isa? disable flags 0x31 # Advanced Power Management # PCCARD (PCMCIA) support #controller card0 #device pcic0 at card? #device pcic1 at card? device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device sio2 at isa? disable port "IO_COM3" tty irq 5 vector siointr device sio3 at isa? disable port "IO_COM4" tty irq 9 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. #device de0 #device fxp0 #device tl0 #device tx0 #device vx0 device xl0 #device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 vector edintr #device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 vector ieintr #device ep0 at isa? port 0x300 net irq 10 vector epintr #device ex0 at isa? port? net irq? vector exintr #device fe0 at isa? port 0x300 net irq ? vector feintr #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr #device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr #device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zeintr #device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr #device cs0 at isa? port 0x300 net irq ? vector csintr pseudo-device loop pseudo-device ether pseudo-device sl 1 pseudo-device ppp 1 pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. options KTRACE #kernel tracing # This provides support for System V shared memory. # options SYSVSHM options SYSVSEM options SYSVMSG # The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be # aware of the legal and administrative consequences of enabling this # option. The number of devices determines the maximum number of # simultaneous BPF clients programs runnable. #pseudo-device bpfilter 4 #Berkeley packet filter # My Sound support; # 16bit Integrated Crystal CS4236B audio controller that provides the # sound functions of the Sound Blaster Pro expansion card controller snd0 #device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr #device sbxvi0 at isa? drq 5 #device sbmidi0 at isa? port 0x330 #device awe0 at isa? port 0x620 #device gus0 at isa? port 0x220 irq 12 drq 1 vector gusintr #device gus0 at isa? port 0x220 irq 12 drq 1 flags 0x3 vector gusintr #device mss0 at isa? port 0x530 irq 10 drq 1 vector adintr device css0 at isa? port 0x534 irq 5 drq 1 flags 0x08 vector adintr #device sscape0 at isa? port 0x330 irq 9 drq 0 vector sscapeintr device trix0 at isa? port 0x330 irq 6 drq 0 vector sscapeintr #device sscape_mss0 at isa? port 0x534 irq 5 drq 1 vector sndintr #device opl0 at isa? port 0x388 #device mpu0 at isa? port 0x330 irq 6 drq 0 #device uart0 at isa? port 0x330 irq 5 vector "m6850intr" # Luigi's snd code (use INSTEAD of snd0 and all VOXWARE drivers!). # You may also wish to enable the pnp controller with this, for pnp # sound cards. # #device pcm0 at isa? port ? tty irq 10 drq 1 flags 0x0 vector pcmintr # Not controlled by `snd' #device pca0 at isa? port IO_TIMER1 tty To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9902241638.AA10187>