From owner-freebsd-bugs@FreeBSD.ORG Sat Dec 4 02:20:10 2010 Return-Path: Delivered-To: freebsd-bugs@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 517DA106566B for ; Sat, 4 Dec 2010 02:20:10 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 1323F8FC12 for ; Sat, 4 Dec 2010 02:20:10 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.4/8.14.4) with ESMTP id oB42K9rV019081 for ; Sat, 4 Dec 2010 02:20:09 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.4/8.14.4/Submit) id oB42K9LS019080; Sat, 4 Dec 2010 02:20:09 GMT (envelope-from gnats) Resent-Date: Sat, 4 Dec 2010 02:20:09 GMT Resent-Message-Id: <201012040220.oB42K9LS019080@freefall.freebsd.org> Resent-From: FreeBSD-gnats-submit@FreeBSD.org (GNATS Filer) Resent-To: freebsd-bugs@FreeBSD.org Resent-Reply-To: FreeBSD-gnats-submit@FreeBSD.org, Julian Stecklina Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id A5B95106566B for ; Sat, 4 Dec 2010 02:11:03 +0000 (UTC) (envelope-from nobody@FreeBSD.org) Received: from red.freebsd.org (unknown [IPv6:2001:4f8:fff6::22]) by mx1.freebsd.org (Postfix) with ESMTP id 93D3D8FC16 for ; Sat, 4 Dec 2010 02:11:03 +0000 (UTC) Received: from red.freebsd.org (localhost [127.0.0.1]) by red.freebsd.org (8.14.4/8.14.4) with ESMTP id oB42B365009573 for ; Sat, 4 Dec 2010 02:11:03 GMT (envelope-from nobody@red.freebsd.org) Received: (from nobody@localhost) by red.freebsd.org (8.14.4/8.14.4/Submit) id oB42B3x0009572; Sat, 4 Dec 2010 02:11:03 GMT (envelope-from nobody) Message-Id: <201012040211.oB42B3x0009572@red.freebsd.org> Date: Sat, 4 Dec 2010 02:11:03 GMT From: Julian Stecklina To: freebsd-gnats-submit@FreeBSD.org X-Send-Pr-Version: www-3.1 Cc: Subject: kern/152817: ahci doesn't find disk X-BeenThere: freebsd-bugs@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Bug reports List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 04 Dec 2010 02:20:10 -0000 >Number: 152817 >Category: kern >Synopsis: ahci doesn't find disk >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Sat Dec 04 02:20:09 UTC 2010 >Closed-Date: >Last-Modified: >Originator: Julian Stecklina >Release: 8.2-PRERELEASE #1 r216136 >Organization: >Environment: FreeBSD block.xn--pl-wia.net 8.2-PRERELEASE FreeBSD 8.2-PRERELEASE #1 r216136: Sat Dec 4 02:32:24 CET 2010 root@block.xn--pl-wia.net:/usr/obj/usr/home/julian/src/freebsd-8/sys/BLOCKAHCI amd64 >Description: I have three disks in my HP Proliant N36L: one 160GB HP disk and two 1TB WD disks. The ahci driver doesn't recognize the first one, only the two WDs. The ataahci driver works as expected. Relevant dmesg output: ahci(ch1: aprobe0:AHCI reset...ahcich0:0: 15:0): SIGNATURE: 0000 (aprobe0:ahcich0:0:0:0): SIGNATURE: 0000 (aprobe0:ahcich0:0:0:0): ATA status error (aprobe0:ahcich0:0:0:0): SETFEATURES. ACB: ef 10 00 00 00 40 00 00 00 00 02 00 (aprobe0:ahcich0:0:0:0): CAM status: ATA Status Error (aprobe0:ahcich0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT ) (aprobe0:ahcich0:0:0:0): RES: 51 04 00 00 00 40 00 00 00 02 00 (aprobe0:ahcich0:0:0:0): Retrying command (aprobe0:ahcich0:0:0:0): ATA status error (aprobe0:ahcich0:0:0:0): SETFEATURES. ACB: ef 10 00 00 00 40 00 00 00 00 02 00 (aprobe0:ahcich0:0:0:0): CAM status: ATA Status Error (aprobe0:ahcich0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT ) (aprobe0:ahcich0:0:0:0): RES: 51 04 00 00 00 40 00 00 00 02 00 (aprobe0:ahcich0:0:0:0): Error 5, Retries exhausted ahcich1: SATA connect timeout status=00000000 ahcich1: AHCI reset done: phy reset found no device Attached is dmesg output where I first kldloaded ahci, kldunloaded it, then kldloaded ataahci and atadisk. >How-To-Repeat: 1. Boot system with ahci driver or kldload ahci 2. Only two of three disks come up. >Fix: Workaround: Use the ataahci/atadisk driver. Patch attached with submission follows: Table 'FACP' at 0x7dfa0290 Table 'APIC' at 0x7dfa0390 APIC: Found table at 0x7dfa0390 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 2: enabled SMP: Added CPU 1 (AP) MADT: Found CPU APIC ID 130 ACPI ID 3: disabled MADT: Found CPU APIC ID 131 ACPI ID 4: disabled Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.2-PRERELEASE #1 r216136: Sat Dec 4 02:32:24 CET 2010 root@block.xn--pl-wia.net:/usr/obj/usr/home/julian/src/freebsd-8/sys/BLOCKAHCI amd64 Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8083e000. Preloaded elf obj module "/boot/kernel/ufs.ko" at 0xffffffff8083e230. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1297848859 Hz CPU: AMD Athlon(tm) II Neo N36L Dual-Core Processor (1297.85-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x100f63 Family = 10 Model = 6 Stepping = 3 Features=0x178bfbff Features2=0x802009 AMD Features=0xee500800 AMD Features2=0x8377f> TSC: P-state invariant L1 2MB data TLB: 48 entries, fully associative L1 2MB instruction TLB: 16 entries, fully associative L1 4KB data TLB: 48 entries, fully associative L1 4KB instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 2MB data TLB: 128 entries, 2-way associative L2 2MB instruction TLB: 0 entries, 2-way associative L2 4KB data TLB: 512 entries, 4-way associative L2 4KB instruction TLB: 512 entries, 4-way associative L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative real memory = 2147483648 (2048 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages) 0x000000000086c000 - 0x000000007a422fff, 2042327040 bytes (498615 pages) avail memory = 2027307008 (1933 MB) ACPI APIC Table: INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP 0xf8f50 00024 (v02 HP ) ACPI: XSDT 0x7dfa0100 0007C (v01 HP ProLiant 20100728 HP 00000097) ACPI: FACP 0x7dfa0290 000F4 (v03 HP ProLiant 20100728 HP 00000097) ACPI: DSDT 0x7dfa0620 06947 (v01 HP ProLiant 00000006 INTL 20051117) ACPI: FACS 0x7dfae000 00040 ACPI: APIC 0x7dfa0390 00072 (v01 HP ProLiant 20100728 HP 00000097) ACPI: MCFG 0x7dfa0410 0003C (v01 HP ProLiant 20100728 HP 00000097) ACPI: SPMI 0x7dfa0450 00041 (v05 HP ProLiant 20100728 HP 00000097) ACPI: OEMB 0x7dfae040 00072 (v01 HP ProLiant 20100728 HP 00000097) ACPI: HPET 0x7dfab4e0 00038 (v01 HP ProLiant 20100728 HP 00000097) ACPI: EINJ 0x7dfab520 00130 (v01 AMIER AMI_EINJ 20100728 HP 00000097) ACPI: BERT 0x7dfab6b0 00030 (v01 AMIER AMI_BERT 20100728 HP 00000097) ACPI: ERST 0x7dfab6e0 001B0 (v01 AMIER AMI_ERST 20100728 HP 00000097) ACPI: HEST 0x7dfab890 000A8 (v01 AMIER ABC_HEST 20100728 HP 00000097) ACPI: SSDT 0x7dfab940 00386 (v01 HP ProLiant 00000001 AMD 00000001) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: low lapic: Routing NMI -> LINT1 lapic: LINT1 trigger: edge lapic: LINT1 polarity: high ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 crypto: null: random: kbd0 at kbdmux0 io: mem: cryptosoft0: on motherboard crypto: assign cryptosoft0 driver id 0, flags 100663296 crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0 acpi0: on motherboard PCIe: Memory Mapped configuration base @ 0xe0000000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] ACPI: Executed 2 blocks of module-level executable AML code ACPI: OEMN 0x7dfaaeb0 00624 (v01 AMD NAHP 00000001 INTL 20051117) ACPI: Enabled 3 new runtime GPEs, added 0 new wakeup GPEs ACPI: Dynamic OEM Table Load: ACPI: OEMN 0 00624 (v01 AMD NAHP 00000001 INTL 20051117) acpi0: Power Button (fixed) acpi0: reservation of fee00000, 1000 (3) failed acpi0: reservation of ffb80000, 80000 (3) failed acpi0: reservation of fec10000, 20 (3) failed acpi0: reservation of fed80000, 1000 (3) failed acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7df00000 (3) failed ACPI timer: 0/6 0/4 1/2 0/3 0/3 0/4 0/3 0/3 0/3 0/3 -> 1 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: on acpi0 cpu0: switching to generic Cx mode cpu1: on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 7 10 11 14 15 Validation 0 255 N 0 4 7 10 11 14 15 After Disable 0 255 N 0 4 7 10 11 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 7 10 11 14 15 Validation 0 255 N 0 4 7 10 11 14 15 After Disable 0 255 N 0 4 7 10 11 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 7 10 11 14 15 Validation 0 255 N 0 4 7 10 11 14 15 After Disable 0 255 N 0 4 7 10 11 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 7 10 11 14 15 Validation 0 255 N 0 4 7 10 11 14 15 After Disable 0 255 N 0 4 7 10 11 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 7 10 11 14 15 Validation 0 255 N 0 4 7 10 11 14 15 After Disable 0 255 N 0 4 7 10 11 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 7 10 11 14 15 Validation 0 255 N 0 4 7 10 11 14 15 After Disable 0 255 N 0 4 7 10 11 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 7 10 11 14 15 Validation 0 255 N 0 4 7 10 11 14 15 After Disable 0 255 N 0 4 7 10 11 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 7 10 11 14 15 Validation 0 255 N 0 4 7 10 11 14 15 After Disable 0 255 N 0 4 7 10 11 14 15 acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x4353 rev: 0x10 num: 2 hz: 14318180 opts: legacy_route Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x1022, dev=0x9601, revid=0x00 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x103c, dev=0x9602, revid=0x00 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x9604, revid=0x00 domain=0, bus=0, slot=4, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.4.INTA pcib0: slot 4 INTA hardwired to IRQ 16 found-> vendor=0x1022, dev=0x9606, revid=0x00 domain=0, bus=0, slot=6, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.6.INTA pcib0: slot 6 INTA hardwired to IRQ 18 found-> vendor=0x1002, dev=0x4391, revid=0x40 domain=0, bus=0, slot=17, func=0 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 MSI supports 4 messages, 64 bit map[10]: type I/O Port, range 32, base 0xd000, size 3, enabled map[14]: type I/O Port, range 32, base 0xc000, size 2, enabled map[18]: type I/O Port, range 32, base 0xb000, size 3, enabled map[1c]: type I/O Port, range 32, base 0xa000, size 2, enabled map[20]: type I/O Port, range 32, base 0x9000, size 4, enabled map[24]: type Memory, range 32, base 0xfe5ffc00, size 10, enabled pcib0: matched entry for 0.17.INTA pcib0: slot 17 INTA hardwired to IRQ 19 found-> vendor=0x1002, dev=0x4397, revid=0x00 domain=0, bus=0, slot=18, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type Memory, range 32, base 0xfe5fe000, size 12, enabled pcib0: matched entry for 0.18.INTA pcib0: slot 18 INTA hardwired to IRQ 18 unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe5fe000 ohci early: SMM active, request owner change found-> vendor=0x1002, dev=0x4396, revid=0x00 domain=0, bus=0, slot=18, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0102, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=4 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe5ff800, size 8, enabled pcib0: matched entry for 0.18.INTB pcib0: slot 18 INTB hardwired to IRQ 17 unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe5ff800 found-> vendor=0x1002, dev=0x4397, revid=0x00 domain=0, bus=0, slot=19, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type Memory, range 32, base 0xfe5fd000, size 12, enabled pcib0: matched entry for 0.19.INTA pcib0: slot 19 INTA hardwired to IRQ 18 unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe5fd000 ohci early: SMM active, request owner change found-> vendor=0x1002, dev=0x4396, revid=0x00 domain=0, bus=0, slot=19, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0102, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=4 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe5ff400, size 8, enabled pcib0: matched entry for 0.19.INTB pcib0: slot 19 INTB hardwired to IRQ 17 unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe5ff400 found-> vendor=0x1002, dev=0x4385, revid=0x41 domain=0, bus=0, slot=20, func=0 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0403, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x439c, revid=0x40 domain=0, bus=0, slot=20, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 map[20]: type I/O Port, range 32, base 0xff00, size 4, enabled found-> vendor=0x1002, dev=0x439d, revid=0x40 domain=0, bus=0, slot=20, func=3 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x4384, revid=0x40 domain=0, bus=0, slot=20, func=4 class=06-04-01, hdrtype=0x01, mfdev=1 cmdreg=0x0105, statreg=0x02a0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) found-> vendor=0x1002, dev=0x4397, revid=0x00 domain=0, bus=0, slot=22, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type Memory, range 32, base 0xfe5fc000, size 12, enabled pcib0: matched entry for 0.22.INTA pcib0: slot 22 INTA hardwired to IRQ 18 unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe5fc000 ohci early: SMM active, request owner change found-> vendor=0x1002, dev=0x4396, revid=0x00 domain=0, bus=0, slot=22, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0102, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=4 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe5ff000, size 8, enabled pcib0: matched entry for 0.22.INTB pcib0: slot 22 INTB hardwired to IRQ 17 unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe5ff000 found-> vendor=0x1022, dev=0x1200, revid=0x00 domain=0, bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1201, revid=0x00 domain=0, bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1202, revid=0x00 domain=0, bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1203, revid=0x00 domain=0, bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1204, revid=0x00 domain=0, bus=0, slot=24, func=4 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib1: at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xe000-0xefff pcib1: memory decode 0xfe600000-0xfe7fffff pcib1: prefetched decode 0xfc000000-0xfdffffff pci1: on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x1002, dev=0x9712, revid=0x00 domain=0, bus=1, slot=5, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x4010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Prefetchable Memory, range 32, base 0xfc000000, size 25, enabled pcib1: requested memory range 0xfc000000-0xfdffffff: good map[14]: type I/O Port, range 32, base 0xe000, size 8, enabled pcib1: requested I/O range 0xe000-0xe0ff: in range map[18]: type Memory, range 32, base 0xfe7f0000, size 16, enabled pcib1: requested memory range 0xfe7f0000-0xfe7fffff: good map[24]: type Memory, range 32, base 0xfe600000, size 20, enabled pcib1: requested memory range 0xfe600000-0xfe6fffff: good pcib1: matched entry for 1.5.INTA pcib1: slot 5 INTA hardwired to IRQ 18 vgapci0: port 0xe000-0xe0ff mem 0xfc000000-0xfdffffff,0xfe7f0000-0xfe7fffff,0xfe600000-0xfe6fffff irq 18 at device 5.0 on pci1 pcib2: irq 16 at device 4.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x0-0x0 pcib2: memory decode 0xfe800000-0xfe8fffff pcib2: no prefetched decode pci2: on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x1814, dev=0x0781, revid=0x00 domain=0, bus=2, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 32 messages, 64 bit map[10]: type Memory, range 32, base 0xfe8f0000, size 16, enabled pcib2: requested memory range 0xfe8f0000-0xfe8fffff: good pcib2: matched entry for 2.0.INTA pcib2: slot 0 INTA hardwired to IRQ 16 pci2: at device 0.0 (no driver attached) pcib3: irq 18 at device 6.0 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0x0-0x0 pcib3: memory decode 0xfe900000-0xfe9fffff pcib3: no prefetched decode pci3: on pcib3 pci3: domain=0, physical bus=3 found-> vendor=0x14e4, dev=0x165b, revid=0x10 domain=0, bus=3, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xfe9f0000, size 16, enabled pcib3: requested memory range 0xfe9f0000-0xfe9fffff: good pcib3: matched entry for 3.0.INTA pcib3: slot 0 INTA hardwired to IRQ 18 bge0: mem 0xfe9f0000-0xfe9fffff irq 18 at device 0.0 on pci3 bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfe9f0000 bge0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 49 bge0: using IRQ 256 for MSI bge0: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E bge0: Disabling fastboot bge0: Disabling fastboot miibus0: on bge0 brgphy0: PHY 1 on miibus0 brgphy0: OUI 0x0050ef, model 0x003a, rev. 4 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: bpf attached bge0: Ethernet address: d4:85:64:c8:5c:50 bge0: [MPSAFE] bge0: [FILTER] pci0: at device 17.0 (no driver attached) ohci0: mem 0xfe5fe000-0xfe5fefff irq 18 at device 18.0 on pci0 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 50 ohci0: [MPSAFE] ohci0: [ITHREAD] usbus0: on ohci0 ehci0: mem 0xfe5ff800-0xfe5ff8ff irq 17 at device 18.2 on pci0 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 51 ehci0: [MPSAFE] ehci0: [ITHREAD] ehci0: Dropped interrupts workaround enabled usbus1: EHCI version 1.0 usbus1: on ehci0 ohci1: mem 0xfe5fd000-0xfe5fdfff irq 18 at device 19.0 on pci0 ohci1: [MPSAFE] ohci1: [ITHREAD] usbus2: on ohci1 ehci1: mem 0xfe5ff400-0xfe5ff4ff irq 17 at device 19.2 on pci0 ehci1: [MPSAFE] ehci1: [ITHREAD] ehci1: Dropped interrupts workaround enabled usbus3: EHCI version 1.0 usbus3: on ehci1 pci0: at device 20.0 (no driver attached) pci0: at device 20.1 (no driver attached) isab0: at device 20.3 on pci0 isa0: on isab0 pcib4: at device 20.4 on pci0 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0xf000-0xfff pcib4: no prefetched decode pcib4: Subtractively decoded bridge. pcib4: could not get PCI interrupt routing table for \\_SB_.PCI0.P0PC - AE_NOT_FOUND pci4: on pcib4 pci4: domain=0, physical bus=4 ohci2: mem 0xfe5fc000-0xfe5fcfff irq 18 at device 22.0 on pci0 ohci2: [MPSAFE] ohci2: [ITHREAD] usbus4: on ohci2 ehci2: mem 0xfe5ff000-0xfe5ff0ff irq 17 at device 22.2 on pci0 ehci2: [MPSAFE] ehci2: [ITHREAD] ehci2: Dropped interrupts workaround enabled usbus5: EHCI version 1.0 usbus5: on ehci2 acpi_button0: on acpi0 atrtc0: port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) acpi_hpet1: iomem 0xfed00000-0xfed003ff on acpi0 device_attach: acpi_hpet1 attach returned 12 acpi0: wakeup code va 0xffffff8000123000 pa 0x4000 isa_probe_children: disabling PnP devices atrtc: atrtc0 already exists; skipping it sc: sc0 already exists; skipping it isa_probe_children: probing non-PnP devices sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: scteken (teken terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0 failed to probe at port 0x60 on isa0 fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 ppc0 failed to probe at irq 7 on isa0 uart0 failed to probe at port 0x3f8 irq 4 on isa0 uart1 failed to probe at port 0x2f8 irq 3 on isa0 isa_probe_children: probing PnP devices acpi_throttle0: on cpu0 acpi_throttle0: P_CNT from P_BLK 0x810 hwpstate0: on cpu0 Device configuration finished. procfs registered lapic: Divisor 2, Frequency 99834536 Hz Timecounter "TSC" frequency 1297848859 Hz quality -100 Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining IPsec: Initialized Security Association Processing. lo0: bpf attached usbus0: 12Mbps Full Speed USB v1.0 usbus1: 480Mbps High Speed USB v2.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 480Mbps High Speed USB v2.0 SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 1 vector 48 msi: Assigning MSI IRQ 256 to local APIC 1 vector 49 Root mount waiting for: usbus5 usbus4 usbus3 usbus2 usbus1 usbus0 ugen1.1: at usbus1ugen0.1: at usbus0 uhub0: on usbus1 uhub1: on usbus0 ugen2.1: at usbus2ugen3.1: at usbus3 uhub2: on usbus2 uhub3: on usbus3 ugen5.1: at usbus5ugen4.1: at usbus4 uhub4: on usbus5 uhub5: on usbus4 uhub5: 4 ports with 4 removable, self powered uhub1: 5 ports with 5 removable, self powered uhub2: 5 ports with 5 removable, self powered Root mount waiting for: usbus5 usbus3 usbus1 uhub4: 4 ports with 4 removable, self powered uhub0: 5 ports with 5 removable, self powered uhub3: 5 ports with 5 removable, self powered ugen1.2: at usbus1 umass0: on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x0000 Root mount waiting for: usbus1 umass0:0:0:-1: Attached to scbus0 pass0 at umass-sim0 bus 0 scbus0 target 0 lun 0 pass0: Removable Direct Access SCSI-2 device pass0: Serial Number 19015202037242020042 pass0: 40.000MB/s transfers GEOM: new disk da0 da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 da0: Removable Direct Access SCSI-2 device da0: Serial Number 19015202037242020042 da0: 40.000MB/s transfers da0: 15424MB (31588352 512 byte sectors: 255H 63S/T 1966C) Root mount waiting for: usbus1 ugen0.2: at usbus0 ukbd0: on usbus0 kbd: new array size 4 kbd1 at ukbd0 kbd1: ukbd0, generic (0), config:0x0, flags:0x3d0000 uhid0: on usbus0 uhub_reattach_port: port 4 reset failed, error=USB_ERR_TIMEOUT uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 4 Trying to mount root from ufs:/dev/da0s1a ct_to_ts([2010-12-04 02:00:28]) = 1291428028.000000000 start_init: trying /sbin/init bge0: Disabling fastboot bge0: Disabling fastboot pci0: driver added found-> vendor=0x1002, dev=0x4391, revid=0x40 domain=0, bus=0, slot=17, func=0 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=19 MSI supports 4 messages, 64 bit pci0:0:17:0: reprobing on driver added ahci0: port 0xd000-0xd007,0xc000-0xc003,0xb000-0xb007,0xa000-0xa003,0x9000-0x900f mem 0xfe5ffc00-0xfe5fffff irq 19 at device 17.0 on pci0 ahci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfe5ffc00 ahci0: attempting to allocate 1 MSI vectors (4 supported) msi: routing MSI IRQ 257 to local APIC 0 vector 52 ahci0: using IRQ 257 for MSI ahci0: [MPSAFE] ahci0: [ITHREAD] ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier supported ahci0: Caps: 64bit NCQ SNTF MPS ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd 4ports ahci0: Caps2: found-> vendor=0x1002, dev=0x4385, revid=0x41 domain=0, bus=0, slot=20, func=0 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0403, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0:0:20:0: reprobing on driver added found-> vendor=0x1002, dev=0x439c, revid=0x40 domain=0, bus=0, slot=20, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 pci0:0:20:1: reprobing on driver added pci1: driver added pci2: driver added found-> vendor=0x1814, dev=0x0781, revid=0x00 domain=0, bus=2, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 powerspec 3 supports D0 D3 current D0 MSI supports 32 messages, 64 bit pci0:2:0:0: reprobing on driver added pci3: driver added pci4: driver added ahcich0: at channel 0 on ahci0 ahcich0: [MPSAFE] ahcich0: [ITHREAD] ahcich0: Caps: ahcich0: AHCI reset... ahcich1: at channel 1 on ahci0 ahcich1: [MPSAFE] ahcich1: [ITHREAD] ahcich1: Caps: ahcich2: at channel 2 on ahci0 ahcich2: [MPSAFE] ahcich2: [ITHREAD] ahcich2: Caps: ahcich3: at channel 3 on ahci0 ahcich3: [MPSAFE] ahcich3: [ITHREAD] ahcich3: Caps: ahcich0: SATA connect time=0ms status=00000123 ahcich0: ready wait time=2ms ahcich0: AHCI reset done: device found ahci(ch1: aprobe0:AHCI reset...ahcich0:0: 15:0): SIGNATURE: 0000 (aprobe0:ahcich0:0:0:0): SIGNATURE: 0000 (aprobe0:ahcich0:0:0:0): ATA status error (aprobe0:ahcich0:0:0:0): SETFEATURES. ACB: ef 10 00 00 00 40 00 00 00 00 02 00 (aprobe0:ahcich0:0:0:0): CAM status: ATA Status Error (aprobe0:ahcich0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT ) (aprobe0:ahcich0:0:0:0): RES: 51 04 00 00 00 40 00 00 00 02 00 (aprobe0:ahcich0:0:0:0): Retrying command (aprobe0:ahcich0:0:0:0): ATA status error (aprobe0:ahcich0:0:0:0): SETFEATURES. ACB: ef 10 00 00 00 40 00 00 00 00 02 00 (aprobe0:ahcich0:0:0:0): CAM status: ATA Status Error (aprobe0:ahcich0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT ) (aprobe0:ahcich0:0:0:0): RES: 51 04 00 00 00 40 00 00 00 02 00 (aprobe0:ahcich0:0:0:0): Error 5, Retries exhausted ahcich1: SATA connect timeout status=00000000 ahcich1: AHCI reset done: phy reset found no device ahcich2: AHCI reset... ahcich2: SATA connect time=0ms status=00000123 ahcich2: ready wait time=316ms ahcich2: AHCI reset done: device found ahcich(3: aprobe0:AHCI reset...ahcich2:0: 15:0): SIGNATURE: 0000 ahcich3: SATA connect time=0ms status=00000123 (aprobe0:ahcich2:0:0:0): SIGNATURE: 0000 pass1 at ahcich2 bus 0 scbus3 target 0 lun 0 pass1: ATA-8 SATA 2.x device pass1: Serial Number WD-WCAV55213457 pass1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) pass1: Command Queueing enabled ada0 at ahcich2 bus 0 scbus3 target 0 lun 0 ada0: ATA-8 SATA 2.x device ada0: Serial Number WD-WCAV55213457 ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) GEOM: new disk ada0 ahcich3: ready wait time=482ms ahcich3: AHCI reset done: device found (aprobe0:ahcich3:0:15:0): SIGNATURE: 0000 (aprobe0:ahcich3:0:0:0): SIGNATURE: 0000 pass2 at ahcich3 bus 0 scbus4 target 0 lun 0 pass2: ATA-8 SATA 2.x device pass2: Serial Number WD-WCAV55192452 pass2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) pass2: Command Queueing enabled ada1 at ahcich3 bus 0 scbus4 target 0 lun 0GEOM: new disk ada1 ada1: ATA-8 SATA 2.x device ada1: Serial Number WD-WCAV55192452 ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ahcich0: detached ahcich1: detached (ada0:ahcich2:0:0:0): lost device (ada0:ahcich2:0:0:0): removing device entry (pass1:ahcich2:0:0:0): lost device (pass1:ahcich2:0:0:0): removing device entry ahcich2: detached (ada1:ahcich3:0:0:0): lost device (ada1:ahcich3:0:0:0): removing device entry (pass2:ahcich3:0:0:0): lost device (pass2:ahcich3:0:0:0): removing device entry ahcich3: detached ahci0: detached pci0: driver added found-> vendor=0x1002, dev=0x4391, revid=0x40 domain=0, bus=0, slot=17, func=0 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=19 MSI supports 4 messages, 64 bit pci0:0:17:0: reprobing on driver added found-> vendor=0x1002, dev=0x4385, revid=0x41 domain=0, bus=0, slot=20, func=0 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0403, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0:0:20:0: reprobing on driver added found-> vendor=0x1002, dev=0x439c, revid=0x40 domain=0, bus=0, slot=20, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 pci0:0:20:1: reprobing on driver added atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xff00 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=7f ostat1=7f ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff ata0: stat1=0x7f err=0xff lsb=0xff msb=0xff ata0: reset tp2 stat0=ff stat1=ff devices=0x0 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 1 vector 50 ata0: [MPSAFE] ata0: [ITHREAD] ata0: Identifying devices: 00000000 ata0: New devices: 00000000 ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=7f ostat1=7f ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff ata1: stat1=0x7f err=0xff lsb=0xff msb=0xff ata1: reset tp2 stat0=ff stat1=ff devices=0x0 ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 49 ata1: [MPSAFE] ata1: [ITHREAD] ata1: Identifying devices: 00000000 ata1: New devices: 00000000 pci1: driver added pci2: driver added found-> vendor=0x1814, dev=0x0781, revid=0x00 domain=0, bus=2, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 powerspec 3 supports D0 D3 current D0 MSI supports 32 messages, 64 bit pci0:2:0:0: reprobing on driver added pci3: driver added pci4: driver added pci0: driver added found-> vendor=0x1002, dev=0x4391, revid=0x40 domain=0, bus=0, slot=17, func=0 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=19 MSI supports 4 messages, 64 bit pci0:0:17:0: reprobing on driver added atapci1: port 0xd000-0xd007,0xc000-0xc003,0xb000-0xb007,0xa000-0xa003,0x9000-0x900f mem 0xfe5ffc00-0xfe5fffff irq 19 at device 17.0 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x9000 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 1 vector 51 atapci1: [MPSAFE] atapci1: [ITHREAD] atapci1: AHCI v1.20 controller with 4 3Gbps ports, PM supported atapci1: Caps: 64bit NCQ SNTF MPS ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd 4ports ata2: on atapci1 ata2: AHCI reset... ata2: hardware reset ... ata2: SATA connect time=0ms status=00000123 ata2: ready wait time=4ms ata2: software reset port 15... ata2: ready wait time=0ms ata2: SIGNATURE: 00000101 ata2: AHCI reset done: devices=00000001 ata2: [MPSAFE] ata2: [ITHREAD] ata2: Identifying devices: 00000001 ata2: New devices: 00000001 ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire ata3: on atapci1 ata3: AHCI reset... ata3: hardware reset ... ata3: SATA connect timeout status=00000000 ata3: AHCI reset done: phy reset found no device ata3: [MPSAFE] ata3: [ITHREAD] ata3: Identifying devices: 00000000 ata3: New devices: 00000000 ata4: on atapci1 ata4: AHCI reset... ata4: hardware reset ... ata4: SATA connect time=0ms status=00000123 ata4: ready wait time=21ms ata4: software reset port 15... ata4: ready wait time=0ms ata4: SIGNATURE: 00000101 ata4: AHCI reset done: devices=00000001 ata4: [MPSAFE] ata4: [ITHREAD] ata4: Identifying devices: 00000001 ata4: New devices: 00000001 ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ata5: on atapci1 ata5: AHCI reset... ata5: hardware reset ... ata5: SATA connect time=0ms status=00000123 ata5: ready wait time=20ms ata5: software reset port 15... ata5: ready wait time=0ms ata5: SIGNATURE: 00000101 ata5: AHCI reset done: devices=00000001 ata5: [MPSAFE] ata5: [ITHREAD] ata5: Identifying devices: 00000001 ata5: New devices: 00000001 ata5-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire found-> vendor=0x1002, dev=0x4385, revid=0x41 domain=0, bus=0, slot=20, func=0 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0403, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0:0:20:0: reprobing on driver added pci1: driver added pci2: driver added found-> vendor=0x1814, dev=0x0781, revid=0x00 domain=0, bus=2, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 powerspec 3 supports D0 D3 current D0 MSI supports 32 messages, 64 bit pci0:2:0:0: reprobing on driver added pci3: driver added pci4: driver added ad0: setting UDMA100 ad0: 152627MB at ata2-master UDMA100 SATA 3Gb/s ad0: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 ad1: setting UDMA100 ad1: 953869MB at ata4-master UDMA100 SATA 3Gb/s ad1: 1953525168 sectors [1938021C/16H/63S] 16 sectors/interrupt 1 depth queue ad2: setting UDMA100 ad2: 953869MB at ata5-master UDMA100 SATA 3Gb/s ad2: 1953525168 sectors [1938021C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad1 GEOM: new disk ad2 >Release-Note: >Audit-Trail: >Unformatted: