Date: Sat, 4 Dec 2010 02:11:03 GMT From: Julian Stecklina <js@alien8.de> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/152817: ahci doesn't find disk Message-ID: <201012040211.oB42B3x0009572@red.freebsd.org> Resent-Message-ID: <201012040220.oB42K9LS019080@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 152817
>Category: kern
>Synopsis: ahci doesn't find disk
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sat Dec 04 02:20:09 UTC 2010
>Closed-Date:
>Last-Modified:
>Originator: Julian Stecklina
>Release: 8.2-PRERELEASE #1 r216136
>Organization:
>Environment:
FreeBSD block.xn--pl-wia.net 8.2-PRERELEASE FreeBSD 8.2-PRERELEASE #1 r216136: Sat Dec 4 02:32:24 CET 2010 root@block.xn--pl-wia.net:/usr/obj/usr/home/julian/src/freebsd-8/sys/BLOCKAHCI amd64
>Description:
I have three disks in my HP Proliant N36L: one 160GB HP disk and two 1TB WD disks. The ahci driver doesn't recognize the first one, only the two WDs. The ataahci driver works as expected.
Relevant dmesg output:
ahci(ch1: aprobe0:AHCI reset...ahcich0:0:
15:0): SIGNATURE: 0000
(aprobe0:ahcich0:0:0:0): SIGNATURE: 0000
(aprobe0:ahcich0:0:0:0): ATA status error
(aprobe0:ahcich0:0:0:0): SETFEATURES. ACB: ef 10 00 00 00 40 00 00 00 00 02 00
(aprobe0:ahcich0:0:0:0): CAM status: ATA Status Error
(aprobe0:ahcich0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT )
(aprobe0:ahcich0:0:0:0): RES: 51 04 00 00 00 40 00 00 00 02 00
(aprobe0:ahcich0:0:0:0): Retrying command
(aprobe0:ahcich0:0:0:0): ATA status error
(aprobe0:ahcich0:0:0:0): SETFEATURES. ACB: ef 10 00 00 00 40 00 00 00 00 02 00
(aprobe0:ahcich0:0:0:0): CAM status: ATA Status Error
(aprobe0:ahcich0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT )
(aprobe0:ahcich0:0:0:0): RES: 51 04 00 00 00 40 00 00 00 02 00
(aprobe0:ahcich0:0:0:0): Error 5, Retries exhausted
ahcich1: SATA connect timeout status=00000000
ahcich1: AHCI reset done: phy reset found no device
Attached is dmesg output where I first kldloaded ahci, kldunloaded it, then kldloaded ataahci and atadisk.
>How-To-Repeat:
1. Boot system with ahci driver or kldload ahci
2. Only two of three disks come up.
>Fix:
Workaround: Use the ataahci/atadisk driver.
Patch attached with submission follows:
Table 'FACP' at 0x7dfa0290
Table 'APIC' at 0x7dfa0390
APIC: Found table at 0x7dfa0390
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 130 ACPI ID 3: disabled
MADT: Found CPU APIC ID 131 ACPI ID 4: disabled
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-PRERELEASE #1 r216136: Sat Dec 4 02:32:24 CET 2010
root@block.xn--pl-wia.net:/usr/obj/usr/home/julian/src/freebsd-8/sys/BLOCKAHCI amd64
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8083e000.
Preloaded elf obj module "/boot/kernel/ufs.ko" at 0xffffffff8083e230.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1297848859 Hz
CPU: AMD Athlon(tm) II Neo N36L Dual-Core Processor (1297.85-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x100f63 Family = 10 Model = 6 Stepping = 3
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802009<SSE3,MON,CX16,POPCNT>
AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x8377f<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,Prefetch,OSVW,IBS,SKINIT,WDT,<b19>>
TSC: P-state invariant
L1 2MB data TLB: 48 entries, fully associative
L1 2MB instruction TLB: 16 entries, fully associative
L1 4KB data TLB: 48 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB data TLB: 128 entries, 2-way associative
L2 2MB instruction TLB: 0 entries, 2-way associative
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory = 2147483648 (2048 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages)
0x000000000086c000 - 0x000000007a422fff, 2042327040 bytes (498615 pages)
avail memory = 2027307008 (1933 MB)
ACPI APIC Table: <HP ProLiant>
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
ULE: setup cpu 0
ULE: setup cpu 1
ACPI: RSDP 0xf8f50 00024 (v02 HP )
ACPI: XSDT 0x7dfa0100 0007C (v01 HP ProLiant 20100728 HP 00000097)
ACPI: FACP 0x7dfa0290 000F4 (v03 HP ProLiant 20100728 HP 00000097)
ACPI: DSDT 0x7dfa0620 06947 (v01 HP ProLiant 00000006 INTL 20051117)
ACPI: FACS 0x7dfae000 00040
ACPI: APIC 0x7dfa0390 00072 (v01 HP ProLiant 20100728 HP 00000097)
ACPI: MCFG 0x7dfa0410 0003C (v01 HP ProLiant 20100728 HP 00000097)
ACPI: SPMI 0x7dfa0450 00041 (v05 HP ProLiant 20100728 HP 00000097)
ACPI: OEMB 0x7dfae040 00072 (v01 HP ProLiant 20100728 HP 00000097)
ACPI: HPET 0x7dfab4e0 00038 (v01 HP ProLiant 20100728 HP 00000097)
ACPI: EINJ 0x7dfab520 00130 (v01 AMIER AMI_EINJ 20100728 HP 00000097)
ACPI: BERT 0x7dfab6b0 00030 (v01 AMIER AMI_BERT 20100728 HP 00000097)
ACPI: ERST 0x7dfab6e0 001B0 (v01 AMIER AMI_ERST 20100728 HP 00000097)
ACPI: HEST 0x7dfab890 000A8 (v01 AMIER ABC_HEST 20100728 HP 00000097)
ACPI: SSDT 0x7dfab940 00386 (v01 HP ProLiant 00000001 AMD 00000001)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
lapic: Routing NMI -> LINT1
lapic: LINT1 trigger: edge
lapic: LINT1 polarity: high
ioapic0 <Version 2.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
crypto: <crypto core>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
kbd0 at kbdmux0
io: <I/O>
mem: <memory>
cryptosoft0: <software crypto> on motherboard
crypto: assign cryptosoft0 driver id 0, flags 100663296
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
acpi0: <HP ProLiant> on motherboard
PCIe: Memory Mapped configuration base @ 0xe0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: OEMN 0x7dfaaeb0 00624 (v01 AMD NAHP 00000001 INTL 20051117)
ACPI: Enabled 3 new runtime GPEs, added 0 new wakeup GPEs
ACPI: Dynamic OEM Table Load:
ACPI: OEMN 0 00624 (v01 AMD NAHP 00000001 INTL 20051117)
acpi0: Power Button (fixed)
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of ffb80000, 80000 (3) failed
acpi0: reservation of fec10000, 20 (3) failed
acpi0: reservation of fed80000, 1000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7df00000 (3) failed
ACPI timer: 0/6 0/4 1/2 0/3 0/3 0/4 0/3 0/3 0/3 0/3 -> 1
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
cpu1: <ACPI CPU> on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 14 15
Validation 0 255 N 0 4 7 10 11 14 15
After Disable 0 255 N 0 4 7 10 11 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 14 15
Validation 0 255 N 0 4 7 10 11 14 15
After Disable 0 255 N 0 4 7 10 11 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 14 15
Validation 0 255 N 0 4 7 10 11 14 15
After Disable 0 255 N 0 4 7 10 11 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 14 15
Validation 0 255 N 0 4 7 10 11 14 15
After Disable 0 255 N 0 4 7 10 11 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 14 15
Validation 0 255 N 0 4 7 10 11 14 15
After Disable 0 255 N 0 4 7 10 11 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 14 15
Validation 0 255 N 0 4 7 10 11 14 15
After Disable 0 255 N 0 4 7 10 11 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 14 15
Validation 0 255 N 0 4 7 10 11 14 15
After Disable 0 255 N 0 4 7 10 11 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 4 7 10 11 14 15
Validation 0 255 N 0 4 7 10 11 14 15
After Disable 0 255 N 0 4 7 10 11 14 15
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x4353 rev: 0x10 num: 2 hz: 14318180 opts: legacy_route
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1022, dev=0x9601, revid=0x00
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x103c, dev=0x9602, revid=0x00
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x9604, revid=0x00
domain=0, bus=0, slot=4, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.4.INTA
pcib0: slot 4 INTA hardwired to IRQ 16
found-> vendor=0x1022, dev=0x9606, revid=0x00
domain=0, bus=0, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.6.INTA
pcib0: slot 6 INTA hardwired to IRQ 18
found-> vendor=0x1002, dev=0x4391, revid=0x40
domain=0, bus=0, slot=17, func=0
class=01-06-01, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
MSI supports 4 messages, 64 bit
map[10]: type I/O Port, range 32, base 0xd000, size 3, enabled
map[14]: type I/O Port, range 32, base 0xc000, size 2, enabled
map[18]: type I/O Port, range 32, base 0xb000, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xa000, size 2, enabled
map[20]: type I/O Port, range 32, base 0x9000, size 4, enabled
map[24]: type Memory, range 32, base 0xfe5ffc00, size 10, enabled
pcib0: matched entry for 0.17.INTA
pcib0: slot 17 INTA hardwired to IRQ 19
found-> vendor=0x1002, dev=0x4397, revid=0x00
domain=0, bus=0, slot=18, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type Memory, range 32, base 0xfe5fe000, size 12, enabled
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 18
unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe5fe000
ohci early: SMM active, request owner change
found-> vendor=0x1002, dev=0x4396, revid=0x00
domain=0, bus=0, slot=18, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0102, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=4
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfe5ff800, size 8, enabled
pcib0: matched entry for 0.18.INTB
pcib0: slot 18 INTB hardwired to IRQ 17
unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe5ff800
found-> vendor=0x1002, dev=0x4397, revid=0x00
domain=0, bus=0, slot=19, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type Memory, range 32, base 0xfe5fd000, size 12, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 18
unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe5fd000
ohci early: SMM active, request owner change
found-> vendor=0x1002, dev=0x4396, revid=0x00
domain=0, bus=0, slot=19, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0102, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=4
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfe5ff400, size 8, enabled
pcib0: matched entry for 0.19.INTB
pcib0: slot 19 INTB hardwired to IRQ 17
unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe5ff400
found-> vendor=0x1002, dev=0x4385, revid=0x41
domain=0, bus=0, slot=20, func=0
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0403, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x439c, revid=0x40
domain=0, bus=0, slot=20, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
map[20]: type I/O Port, range 32, base 0xff00, size 4, enabled
found-> vendor=0x1002, dev=0x439d, revid=0x40
domain=0, bus=0, slot=20, func=3
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x4384, revid=0x40
domain=0, bus=0, slot=20, func=4
class=06-04-01, hdrtype=0x01, mfdev=1
cmdreg=0x0105, statreg=0x02a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x4397, revid=0x00
domain=0, bus=0, slot=22, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type Memory, range 32, base 0xfe5fc000, size 12, enabled
pcib0: matched entry for 0.22.INTA
pcib0: slot 22 INTA hardwired to IRQ 18
unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe5fc000
ohci early: SMM active, request owner change
found-> vendor=0x1002, dev=0x4396, revid=0x00
domain=0, bus=0, slot=22, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0102, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=4
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfe5ff000, size 8, enabled
pcib0: matched entry for 0.22.INTB
pcib0: slot 22 INTB hardwired to IRQ 17
unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe5ff000
found-> vendor=0x1022, dev=0x1200, revid=0x00
domain=0, bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1201, revid=0x00
domain=0, bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1202, revid=0x00
domain=0, bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1203, revid=0x00
domain=0, bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1204, revid=0x00
domain=0, bus=0, slot=24, func=4
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xe000-0xefff
pcib1: memory decode 0xfe600000-0xfe7fffff
pcib1: prefetched decode 0xfc000000-0xfdffffff
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x1002, dev=0x9712, revid=0x00
domain=0, bus=1, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x4010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Prefetchable Memory, range 32, base 0xfc000000, size 25, enabled
pcib1: requested memory range 0xfc000000-0xfdffffff: good
map[14]: type I/O Port, range 32, base 0xe000, size 8, enabled
pcib1: requested I/O range 0xe000-0xe0ff: in range
map[18]: type Memory, range 32, base 0xfe7f0000, size 16, enabled
pcib1: requested memory range 0xfe7f0000-0xfe7fffff: good
map[24]: type Memory, range 32, base 0xfe600000, size 20, enabled
pcib1: requested memory range 0xfe600000-0xfe6fffff: good
pcib1: matched entry for 1.5.INTA
pcib1: slot 5 INTA hardwired to IRQ 18
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xfc000000-0xfdffffff,0xfe7f0000-0xfe7fffff,0xfe600000-0xfe6fffff irq 18 at device 5.0 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x0-0x0
pcib2: memory decode 0xfe800000-0xfe8fffff
pcib2: no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
found-> vendor=0x1814, dev=0x0781, revid=0x00
domain=0, bus=2, slot=0, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 32 messages, 64 bit
map[10]: type Memory, range 32, base 0xfe8f0000, size 16, enabled
pcib2: requested memory range 0xfe8f0000-0xfe8fffff: good
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 16
pci2: <network> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0x0-0x0
pcib3: memory decode 0xfe900000-0xfe9fffff
pcib3: no prefetched decode
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
found-> vendor=0x14e4, dev=0x165b, revid=0x10
domain=0, bus=3, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xfe9f0000, size 16, enabled
pcib3: requested memory range 0xfe9f0000-0xfe9fffff: good
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 18
bge0: <HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100> mem 0xfe9f0000-0xfe9fffff irq 18 at device 0.0 on pci3
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfe9f0000
bge0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 49
bge0: using IRQ 256 for MSI
bge0: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E
bge0: Disabling fastboot
bge0: Disabling fastboot
miibus0: <MII bus> on bge0
brgphy0: <BCM5784 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: OUI 0x0050ef, model 0x003a, rev. 4
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: bpf attached
bge0: Ethernet address: d4:85:64:c8:5c:50
bge0: [MPSAFE]
bge0: [FILTER]
pci0: <mass storage, SATA> at device 17.0 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe5fe000-0xfe5fefff irq 18 at device 18.0 on pci0
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 50
ohci0: [MPSAFE]
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe5ff800-0xfe5ff8ff irq 17 at device 18.2 on pci0
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 51
ehci0: [MPSAFE]
ehci0: [ITHREAD]
ehci0: Dropped interrupts workaround enabled
usbus1: EHCI version 1.0
usbus1: <EHCI (generic) USB 2.0 controller> on ehci0
ohci1: <OHCI (generic) USB controller> mem 0xfe5fd000-0xfe5fdfff irq 18 at device 19.0 on pci0
ohci1: [MPSAFE]
ohci1: [ITHREAD]
usbus2: <OHCI (generic) USB controller> on ohci1
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe5ff400-0xfe5ff4ff irq 17 at device 19.2 on pci0
ehci1: [MPSAFE]
ehci1: [ITHREAD]
ehci1: Dropped interrupts workaround enabled
usbus3: EHCI version 1.0
usbus3: <EHCI (generic) USB 2.0 controller> on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
pci0: <mass storage, ATA> at device 20.1 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pcib4: domain 0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0xf000-0xfff
pcib4: no prefetched decode
pcib4: Subtractively decoded bridge.
pcib4: could not get PCI interrupt routing table for \\_SB_.PCI0.P0PC - AE_NOT_FOUND
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
ohci2: <OHCI (generic) USB controller> mem 0xfe5fc000-0xfe5fcfff irq 18 at device 22.0 on pci0
ohci2: [MPSAFE]
ohci2: [ITHREAD]
usbus4: <OHCI (generic) USB controller> on ohci2
ehci2: <EHCI (generic) USB 2.0 controller> mem 0xfe5ff000-0xfe5ff0ff irq 17 at device 22.2 on pci0
ehci2: [MPSAFE]
ehci2: [ITHREAD]
ehci2: Dropped interrupts workaround enabled
usbus5: EHCI version 1.0
usbus5: <EHCI (generic) USB 2.0 controller> on ehci2
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
acpi_hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
device_attach: acpi_hpet1 attach returned 12
acpi0: wakeup code va 0xffffff8000123000 pa 0x4000
isa_probe_children: disabling PnP devices
atrtc: atrtc0 already exists; skipping it
sc: sc0 already exists; skipping it
isa_probe_children: probing non-PnP devices
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0 failed to probe at port 0x60 on isa0
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc0 failed to probe at irq 7 on isa0
uart0 failed to probe at port 0x3f8 irq 4 on isa0
uart1 failed to probe at port 0x2f8 irq 3 on isa0
isa_probe_children: probing PnP devices
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x810
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 99834536 Hz
Timecounter "TSC" frequency 1297848859 Hz quality -100
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
IPsec: Initialized Security Association Processing.
lo0: bpf attached
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 1 vector 48
msi: Assigning MSI IRQ 256 to local APIC 1 vector 49
Root mount waiting for: usbus5 usbus4 usbus3 usbus2 usbus1 usbus0
ugen1.1: <ATI> at usbus1ugen0.1: <ATI> at usbus0
uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen2.1: <ATI> at usbus2ugen3.1: <ATI> at usbus3
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen5.1: <ATI> at usbus5ugen4.1: <ATI> at usbus4
uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub5: 4 ports with 4 removable, self powered
uhub1: 5 ports with 5 removable, self powered
uhub2: 5 ports with 5 removable, self powered
Root mount waiting for: usbus5 usbus3 usbus1
uhub4: 4 ports with 4 removable, self powered
uhub0: 5 ports with 5 removable, self powered
uhub3: 5 ports with 5 removable, self powered
ugen1.2: <USBest Technology> at usbus1
umass0: <USBest Technology USB Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> on usbus1
umass0: SCSI over Bulk-Only; quirks = 0x0000
Root mount waiting for: usbus1
umass0:0:0:-1: Attached to scbus0
pass0 at umass-sim0 bus 0 scbus0 target 0 lun 0
pass0: <Ut165 USB2FlashStorage 0.00> Removable Direct Access SCSI-2 device
pass0: Serial Number 19015202037242020042
pass0: 40.000MB/s transfers
GEOM: new disk da0
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <Ut165 USB2FlashStorage 0.00> Removable Direct Access SCSI-2 device
da0: Serial Number 19015202037242020042
da0: 40.000MB/s transfers
da0: 15424MB (31588352 512 byte sectors: 255H 63S/T 1966C)
Root mount waiting for: usbus1
ugen0.2: <vendor 0x046a> at usbus0
ukbd0: <vendor 0x046a product 0x0023, class 0/0, rev 2.00/0.32, addr 2> on usbus0
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x3d0000
uhid0: <vendor 0x046a product 0x0023, class 0/0, rev 2.00/0.32, addr 2> on usbus0
uhub_reattach_port: port 4 reset failed, error=USB_ERR_TIMEOUT
uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 4
Trying to mount root from ufs:/dev/da0s1a
ct_to_ts([2010-12-04 02:00:28]) = 1291428028.000000000
start_init: trying /sbin/init
bge0: Disabling fastboot
bge0: Disabling fastboot
pci0: driver added
found-> vendor=0x1002, dev=0x4391, revid=0x40
domain=0, bus=0, slot=17, func=0
class=01-06-01, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=19
MSI supports 4 messages, 64 bit
pci0:0:17:0: reprobing on driver added
ahci0: <ATI IXP700 AHCI SATA controller> port 0xd000-0xd007,0xc000-0xc003,0xb000-0xb007,0xa000-0xa003,0x9000-0x900f mem 0xfe5ffc00-0xfe5fffff irq 19 at device 17.0 on pci0
ahci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfe5ffc00
ahci0: attempting to allocate 1 MSI vectors (4 supported)
msi: routing MSI IRQ 257 to local APIC 0 vector 52
ahci0: using IRQ 257 for MSI
ahci0: [MPSAFE]
ahci0: [ITHREAD]
ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier supported
ahci0: Caps: 64bit NCQ SNTF MPS ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd 4ports
ahci0: Caps2:
found-> vendor=0x1002, dev=0x4385, revid=0x41
domain=0, bus=0, slot=20, func=0
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0403, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0:0:20:0: reprobing on driver added
found-> vendor=0x1002, dev=0x439c, revid=0x40
domain=0, bus=0, slot=20, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
pci0:0:20:1: reprobing on driver added
pci1: driver added
pci2: driver added
found-> vendor=0x1814, dev=0x0781, revid=0x00
domain=0, bus=2, slot=0, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
powerspec 3 supports D0 D3 current D0
MSI supports 32 messages, 64 bit
pci0:2:0:0: reprobing on driver added
pci3: driver added
pci4: driver added
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [MPSAFE]
ahcich0: [ITHREAD]
ahcich0: Caps:
ahcich0: AHCI reset...
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: [MPSAFE]
ahcich1: [ITHREAD]
ahcich1: Caps:
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: [MPSAFE]
ahcich2: [ITHREAD]
ahcich2: Caps:
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: [MPSAFE]
ahcich3: [ITHREAD]
ahcich3: Caps:
ahcich0: SATA connect time=0ms status=00000123
ahcich0: ready wait time=2ms
ahcich0: AHCI reset done: device found
ahci(ch1: aprobe0:AHCI reset...ahcich0:0:
15:0): SIGNATURE: 0000
(aprobe0:ahcich0:0:0:0): SIGNATURE: 0000
(aprobe0:ahcich0:0:0:0): ATA status error
(aprobe0:ahcich0:0:0:0): SETFEATURES. ACB: ef 10 00 00 00 40 00 00 00 00 02 00
(aprobe0:ahcich0:0:0:0): CAM status: ATA Status Error
(aprobe0:ahcich0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT )
(aprobe0:ahcich0:0:0:0): RES: 51 04 00 00 00 40 00 00 00 02 00
(aprobe0:ahcich0:0:0:0): Retrying command
(aprobe0:ahcich0:0:0:0): ATA status error
(aprobe0:ahcich0:0:0:0): SETFEATURES. ACB: ef 10 00 00 00 40 00 00 00 00 02 00
(aprobe0:ahcich0:0:0:0): CAM status: ATA Status Error
(aprobe0:ahcich0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT )
(aprobe0:ahcich0:0:0:0): RES: 51 04 00 00 00 40 00 00 00 02 00
(aprobe0:ahcich0:0:0:0): Error 5, Retries exhausted
ahcich1: SATA connect timeout status=00000000
ahcich1: AHCI reset done: phy reset found no device
ahcich2: AHCI reset...
ahcich2: SATA connect time=0ms status=00000123
ahcich2: ready wait time=316ms
ahcich2: AHCI reset done: device found
ahcich(3: aprobe0:AHCI reset...ahcich2:0:
15:0): SIGNATURE: 0000
ahcich3: SATA connect time=0ms status=00000123
(aprobe0:ahcich2:0:0:0): SIGNATURE: 0000
pass1 at ahcich2 bus 0 scbus3 target 0 lun 0
pass1: <WDC WD10EARS-00Y5B1 80.00A80> ATA-8 SATA 2.x device
pass1: Serial Number WD-WCAV55213457
pass1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
pass1: Command Queueing enabled
ada0 at ahcich2 bus 0 scbus3 target 0 lun 0
ada0: <WDC WD10EARS-00Y5B1 80.00A80> ATA-8 SATA 2.x device
ada0: Serial Number WD-WCAV55213457
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
GEOM: new disk ada0
ahcich3: ready wait time=482ms
ahcich3: AHCI reset done: device found
(aprobe0:ahcich3:0:15:0): SIGNATURE: 0000
(aprobe0:ahcich3:0:0:0): SIGNATURE: 0000
pass2 at ahcich3 bus 0 scbus4 target 0 lun 0
pass2: <WDC WD10EARS-00Y5B1 80.00A80> ATA-8 SATA 2.x device
pass2: Serial Number WD-WCAV55192452
pass2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
pass2: Command Queueing enabled
ada1 at ahcich3 bus 0 scbus4 target 0 lun 0GEOM: new disk ada1
ada1:
<WDC WD10EARS-00Y5B1 80.00A80> ATA-8 SATA 2.x device
ada1: Serial Number WD-WCAV55192452
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ahcich0: detached
ahcich1: detached
(ada0:ahcich2:0:0:0): lost device
(ada0:ahcich2:0:0:0): removing device entry
(pass1:ahcich2:0:0:0): lost device
(pass1:ahcich2:0:0:0): removing device entry
ahcich2: detached
(ada1:ahcich3:0:0:0): lost device
(ada1:ahcich3:0:0:0): removing device entry
(pass2:ahcich3:0:0:0): lost device
(pass2:ahcich3:0:0:0): removing device entry
ahcich3: detached
ahci0: detached
pci0: driver added
found-> vendor=0x1002, dev=0x4391, revid=0x40
domain=0, bus=0, slot=17, func=0
class=01-06-01, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=19
MSI supports 4 messages, 64 bit
pci0:0:17:0: reprobing on driver added
found-> vendor=0x1002, dev=0x4385, revid=0x41
domain=0, bus=0, slot=20, func=0
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0403, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0:0:20:0: reprobing on driver added
found-> vendor=0x1002, dev=0x439c, revid=0x40
domain=0, bus=0, slot=20, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
pci0:0:20:1: reprobing on driver added
atapci0: <ATI ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xff00
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=7f ostat1=7f
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata0: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata0: reset tp2 stat0=ff stat1=ff devices=0x0
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 1 vector 50
ata0: [MPSAFE]
ata0: [ITHREAD]
ata0: Identifying devices: 00000000
ata0: New devices: 00000000
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=7f ostat1=7f
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata1: reset tp2 stat0=ff stat1=ff devices=0x0
ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 49
ata1: [MPSAFE]
ata1: [ITHREAD]
ata1: Identifying devices: 00000000
ata1: New devices: 00000000
pci1: driver added
pci2: driver added
found-> vendor=0x1814, dev=0x0781, revid=0x00
domain=0, bus=2, slot=0, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
powerspec 3 supports D0 D3 current D0
MSI supports 32 messages, 64 bit
pci0:2:0:0: reprobing on driver added
pci3: driver added
pci4: driver added
pci0: driver added
found-> vendor=0x1002, dev=0x4391, revid=0x40
domain=0, bus=0, slot=17, func=0
class=01-06-01, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=19
MSI supports 4 messages, 64 bit
pci0:0:17:0: reprobing on driver added
atapci1: <ATI (ID=43911002) AHCI controller> port 0xd000-0xd007,0xc000-0xc003,0xb000-0xb007,0xa000-0xa003,0x9000-0x900f mem 0xfe5ffc00-0xfe5fffff irq 19 at device 17.0 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x9000
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 1 vector 51
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: AHCI v1.20 controller with 4 3Gbps ports, PM supported
atapci1: Caps: 64bit NCQ SNTF MPS ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd 4ports
ata2: <ATA channel 0> on atapci1
ata2: AHCI reset...
ata2: hardware reset ...
ata2: SATA connect time=0ms status=00000123
ata2: ready wait time=4ms
ata2: software reset port 15...
ata2: ready wait time=0ms
ata2: SIGNATURE: 00000101
ata2: AHCI reset done: devices=00000001
ata2: [MPSAFE]
ata2: [ITHREAD]
ata2: Identifying devices: 00000001
ata2: New devices: 00000001
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
ata3: <ATA channel 1> on atapci1
ata3: AHCI reset...
ata3: hardware reset ...
ata3: SATA connect timeout status=00000000
ata3: AHCI reset done: phy reset found no device
ata3: [MPSAFE]
ata3: [ITHREAD]
ata3: Identifying devices: 00000000
ata3: New devices: 00000000
ata4: <ATA channel 2> on atapci1
ata4: AHCI reset...
ata4: hardware reset ...
ata4: SATA connect time=0ms status=00000123
ata4: ready wait time=21ms
ata4: software reset port 15...
ata4: ready wait time=0ms
ata4: SIGNATURE: 00000101
ata4: AHCI reset done: devices=00000001
ata4: [MPSAFE]
ata4: [ITHREAD]
ata4: Identifying devices: 00000001
ata4: New devices: 00000001
ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ata5: <ATA channel 3> on atapci1
ata5: AHCI reset...
ata5: hardware reset ...
ata5: SATA connect time=0ms status=00000123
ata5: ready wait time=20ms
ata5: software reset port 15...
ata5: ready wait time=0ms
ata5: SIGNATURE: 00000101
ata5: AHCI reset done: devices=00000001
ata5: [MPSAFE]
ata5: [ITHREAD]
ata5: Identifying devices: 00000001
ata5: New devices: 00000001
ata5-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
found-> vendor=0x1002, dev=0x4385, revid=0x41
domain=0, bus=0, slot=20, func=0
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0403, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0:0:20:0: reprobing on driver added
pci1: driver added
pci2: driver added
found-> vendor=0x1814, dev=0x0781, revid=0x00
domain=0, bus=2, slot=0, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
powerspec 3 supports D0 D3 current D0
MSI supports 32 messages, 64 bit
pci0:2:0:0: reprobing on driver added
pci3: driver added
pci4: driver added
ad0: setting UDMA100
ad0: 152627MB <VB0160EAVEQ HPG0> at ata2-master UDMA100 SATA 3Gb/s
ad0: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ad1: setting UDMA100
ad1: 953869MB <WDC WD10EARS-00Y5B1 80.00A80> at ata4-master UDMA100 SATA 3Gb/s
ad1: 1953525168 sectors [1938021C/16H/63S] 16 sectors/interrupt 1 depth queue
ad2: setting UDMA100
ad2: 953869MB <WDC WD10EARS-00Y5B1 80.00A80> at ata5-master UDMA100 SATA 3Gb/s
ad2: 1953525168 sectors [1938021C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad1
GEOM: new disk ad2
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201012040211.oB42B3x0009572>