Date: Wed, 05 Oct 2005 21:42:08 +0100 From: Bdrawyah <bdrawyah@bdrawyah.plus.com> To: freebsd-questions@freebsd.org Subject: fxp0 problem with 6Beta? Message-ID: <20051005200954.54E3443D46@mx1.FreeBSD.org>
next in thread | raw e-mail | index | archive | help
I have a small LAN at home consisting of 192.168.0.5 (a single PIII) which runs 5.4 stable and 192.168. 0.7 (a dual PIII) which runs 6Beta4 connected with a Netgear router at 192.168.0.1. 192.168.0.7 has nothing on it, no firewall even, aside from 6Beta (with debugging turned off in the kernel) and cvsup. >From 192.168.0.7 I can find and login to 192.168.0.5 and external computers using ssh. >From 192.168.0.5 I can login to external computers using ssh but there is no sign of 192.168.0.7, pinging fails and the Netgear router can't see it. Any suggestions? Below is dmesg for 192.168.0.7 Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-BETA4 #0: Sun Sep 11 16:48:29 BST 2005 root@box7.bruce.net:/usr/obj/usr/src/sys/BOX7BRUCE Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (731.02-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX, FXSR,SSE> real memory = 536870912 (512 MB) avail memory = 515887104 (491 MB) MPTable: <COMPAQ Workstation > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 1 cpu1 (AP): APIC ID: 0 ioapic0: Changing APIC ID to 8 ioapic0: Assuming intbase of 0 ioapic0 <Version 2.0> irqs 0-23 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface cpu0 on motherboard cpu1 on motherboard pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82840 host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pcib2: <MPTable PCI-PCI bridge> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 fxp0: <Intel 82559 Pro/100 Ethernet> port 0x5400-0x543f mem 0xfdc00000-0xfdc00fff,0xfdd00000-0xfd dfffff irq 18 at device 2.0 on pci2 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:02:a5:53:cb:3f ahc0: <Adaptec aic7892 Ultra160 SCSI adapter> port 0x5000-0x50ff mem 0xfde00000-0xfde00fff irq 19 at device 7.0 on pci2 ahc0: [GIANT-LOCKED] aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs pci2: <display, VGA> at device 11.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH UDMA66 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x6460-0x646f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 uhci0: <Intel 82801AA (ICH) USB controller> port 0x6440-0x645f irq 19 at device 31.2 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801AA (ICH) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pci0: <multimedia, audio> at device 31.5 (no driver attached) pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,0xe0000-0xeffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/13 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0401> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0700> can't assign resources (port) unknown: <PNP0c01> can't assign resources (memory) unknown: <PNP0303> can't assign resources (port) unknown: <PNP0f13> can't assign resources (irq) Timecounters tick every 1.000 msec acd0: CDROM <Compaq CRD-8402B/1.01> at ata0-master PIO4 Waiting 5 seconds for SCSI devices to settle da0 at ahc0 bus 0 target 0 lun 0 da0: <COMPAQ BD00975CC6 HPB6> Fixed Direct Access SCSI-3 device da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled da0: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C) SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/da0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20051005200954.54E3443D46>