Date: Sat, 12 Dec 2009 13:31:44 -0800 From: Steve Rikli <sr@genyosha.net> To: freebsd-sparc64@freebsd.org Subject: Resend: free Ultra60 for pick-up in Silicon Valley CA, USA Message-ID: <20091212213144.GB92184@dragon.genyosha.net>
next in thread | raw e-mail | index | archive | help
I haven't had any takers for the Ultra60 locally yet, so if someone in the USA would like me to try to ship it and is willing to reimburse me for the cost of shipping, I'm willing to box it up and send it. If there is no interest this time around I'll be advertising it on Craigslist.org jfyi. Cheers, sr. On Tue, Nov 24, 2009 at 07:34:37PM -0800, Steve Rikli wrote: > I have an Ultra60 to give away to a good home. It is located in > Silicon Valley CA, USA and due to the size/weight I don't believe > I'll be able to ship it, so local pick-ups only, please. > > Basic specs are: > > Ultra60, 2*450MHz CPU, 2GB RAM, 2*72GB SCSI disks, DVD, > 2*hme, QLogic SCSI card, SysKonnect GigE > > I also have a spare set of slower (360MHz) CPUs leftover from before > the upgrade; they haven't been used in a while but they were good > when I pulled them, and I'll send them along too. > > Full dmesg is included below. > > Cheers, > sr. > -- > console is /pci@1f,4000/ebus@1/se@14,400000:a > Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, > 2006, 2007 > The NetBSD Foundation, Inc. All rights reserved. > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > > NetBSD 4.0.1 (GENERIC) #0: Wed Oct 8 01:13:20 PDT 2008 > builds@wb32:/home/builds/ab/netbsd-4-0-1-RELEASE/sparc64/200810080053Z-obj/home/builds/ab/netbsd-4-0-1-RELEASE/src/sys/arch/sparc64/compile/GENERIC > total memory = 2048 MB > avail memory = 1996 MB > timecounter: Timecounters tick every 10.000 msec > bootpath: /pci@1f,4000/scsi@3/disk@0,0:a > mainbus0 (root): SUNW,Ultra-60: hostid 80be7627 > cpu0 at mainbus0: SUNW,UltraSPARC-II @ 450.036 MHz, UPA id 0 > cpu0: 32K instruction (32 b/l), 16K data (32 b/l), 4096K external (64 b/l) > cpu at mainbus0 not configured > psycho0 at mainbus0 addr 0xfffb4000 > SUNW,psycho: impl 0, version 4: ign 7c0 bus range 0 to 0; PCI bus 0 > DVMA map: fe000000 to ffffe000 > IOTSB: 2196000 to 219e000 > pci0 at psycho0 > pci0: i/o space, memory space enabled > ebus0 at pci0 dev 1 function 0 > ebus0: Sun Microsystems PCIO Ebus2, revision 0x01 > auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, 72c000-72c003, 72f000-72f003 > power at ebus0 addr 724000-724003 not configured > SUNW,pll at ebus0 addr 504000-504002 not configured > sc at ebus0 addr 500000-500007 not configured > sab0 at ebus0 addr 400000-40007f ipl 43: rev 3.2 > sabtty0 at sab0 port 0: console i/o > sabtty1 at sab0 port 1 > com0 at ebus0 addr 3083f8-3083ff ipl 41: ns16550a, working fifo > kbd0 at com0 > com1 at ebus0 addr 3062f8-3062ff ipl 42: ns16550a, working fifo > ms0 at com1 > wsmouse0 at ms0 mux 0 > lpt0 at ebus0 addr 3043bc-3043cb, 300398-300399, 700000-70000f ipl 34 > fdthree at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ipl 39 not configured > clock0 at ebus0 addr 0-1fff: mk48t59 > flashprom at ebus0 addr 0-fffff not configured > audiocs0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f, 722000-722003 ipl 35 ipl 36: CS4231A > audio0 at audiocs0: full duplex > hme0 at pci0 dev 1 function 1: Sun Happy Meal Ethernet, rev. 1 > hme0: interrupting at ivec 3021 > hme0: Ethernet address 08:00:20:be:76:27 > ukphy0 at hme0 phy 1: Generic IEEE 802.3u media interface > ukphy0: OUI 0x0006b8, model 0x000c, rev. 1 > ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > esiop0 at pci0 dev 3 function 0: Symbios Logic 53c875 (ultra-wide scsi) > esiop0: using on-board RAM > esiop0: interrupting at ivec 1820 > scsibus0 at esiop0: 16 targets, 8 luns per target > esiop1 at pci0 dev 3 function 1: Symbios Logic 53c875 (ultra-wide scsi) > esiop1: using on-board RAM > esiop1: interrupting at ivec 1826 > scsibus1 at esiop1: 16 targets, 8 luns per target > hme1 at pci0 dev 2 function 1: Sun Happy Meal Ethernet, rev. 1 > hme1: interrupting at ivec 3011 > hme1: Ethernet address 08:00:20:be:76:27 > ukphy1 at hme1 phy 1: Generic IEEE 802.3u media interface > ukphy1: OUI 0x0006b8, model 0x000c, rev. 1 > ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > skc0 at pci0 dev 4 function 0: ivec 18 > skc0: interrupt moderation is 0 us > skc0: SK-9821 V2.0 Gigabit Ethernet 10/100/1000Base-T Adapter rev. (0x1) > sk0 at skc0 port A: Ethernet address 00:00:5a:9b:13:1e > makphy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 3 > makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto > isp0 at pci0 dev 5 function 0: QLogic 1020 Fast Wide SCSI HBA > isp0: interrupting at ivec 1c > scsibus2 at isp0: 16 targets, 8 luns per target > psycho1 at mainbus0 addr 0xfffc6000 > SUNW,psycho: impl 0, version 4: ign 7c0 bus range 128 to 128; PCI bus 128 > pci1 at psycho1 > pci1: i/o space, memory space enabled > Sun Microsystems PCIO Ebus2 (miscellaneous bridge, revision 0x01) at pci1 dev 1 function 0 not configured > hme2 at pci1 dev 1 function 1: Sun Happy Meal Ethernet, rev. 1 > hme2: interrupting at ivec 3001 > hme2: Ethernet address 08:00:20:be:76:27 > ukphy2 at hme2 phy 1: Generic IEEE 802.3u media interface > ukphy2: OUI 0x0006b8, model 0x000c, rev. 1 > ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > timer0 at mainbus0 addr 0xfff9fc00 irq vectors 7ec and 7ed > ffb0 at mainbus0 addr 0xfeb80000: Creator3D, model SUNW,501-4788, dac 10 > ffb0: attached to /dev/fb0 > wsdisplay1 at ffb0 kbdmux 1 > wsmux1: connecting to wsdisplay1 > wsdisplay1: screen 0-3 added (sunffb, sun emulation) > pcons at mainbus0 not configured > timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 > timecounter: Timecounter "tick-counter" frequency 450036421 Hz quality 100 > wskbd0 at kbd0 mux 1 > kbd0: reset failed > wskbd0: connecting to wsdisplay1 > Kernelized RAIDframe activated > scsibus0: waiting 2 seconds for devices to settle... > scsibus1: waiting 2 seconds for devices to settle... > scsibus2: waiting 2 seconds for devices to settle... > sd0 at scsibus0 target 0 lun 0: <NETAPP, X243_FAL7E073S10, NA00> disk fixed > sd0: 70092 MB, 29902 cyl, 8 head, 600 sec, 512 bytes/sect x 143550456 sectors > sd0: sync (50.00ns offset 16), 16-bit (40.000MB/s) transfers, tagged queueing > sd1 at scsibus0 target 1 lun 0: <NETAPP, X243_FAL7E073S10, NA00> disk fixed > sd1: 70092 MB, 29902 cyl, 8 head, 600 sec, 512 bytes/sect x 143550456 sectors > sd1: sync (50.00ns offset 16), 16-bit (40.000MB/s) transfers, tagged queueing > cd0 at scsibus0 target 6 lun 0: <TOSHIBA, DVD-ROM SD-M1401, 1007> cdrom removable > cd0: sync (50.00ns offset 16), 8-bit (20.000MB/s) transfers > root on sd0a dumps on sd0b > root file system type: ffs
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20091212213144.GB92184>