Date: Mon, 5 Jun 2006 13:32:01 +1000 From: Alexander Logvinov <abuse@akavia.ru> To: freebsd-acpi@freebsd.org Subject: Machine did not reboot Message-ID: <1182686709.20060605133201@akavia.ru>
next in thread | raw e-mail | index | archive | help
Hello. I had FreeBSD 5.4. After entering 'shutdown -r now' the system hanged on: 'Shutting down ACPI' 'Rebooting' but did not reboot. Upgraded to 6.1, it didn't help. hw.acpi.disable_on_poweroff="1" has no effect. What should I do? Motherboard: Chaintech 7VJL with latest BIOS. # dmesg Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-RELEASE-p1 #5: Fri Jun 2 11:59:37 YAKST 2006 user@akavia:/usr/obj/usr/src/sys/AKA ACPI APIC Table: <VIA694 AWRDACPI> Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) XP 1800+ (1528.99-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x681 Stepping = 1 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0400800<SYSCALL,MMX+,3DNow+,3DNow> real memory = 536805376 (511 MB) avail memory = 520134656 (496 MB) ioapic0 <Version 0.3> irqs 0-23 on motherboard acpi0: <VIA694 AWRDACPI> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0x4000-0x407f,0x4080-0x40ff,0x5000-0x500f on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <VIA 8367 (KT266/KY266x/KT333) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 skc0: <SysKonnect Gigabit Ethernet (V2.0)> port 0xc000-0xc0ff mem 0xe4020000-0xe4023fff irq 16 at device 9.0 on pci0 skc0: Marvell Yukon Lite Gigabit Ethernet rev. A3(0x7) sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: Ethernet address: 00:0c:46:46:74:aa miibus0: <MII bus> on sk0 e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto ed0: <RealTek 8029> port 0xc400-0xc41f irq 17 at device 10.0 on pci0 ed0: Ethernet address: 00:00:e8:dc:52:fc ed0: type RTL8029 (16 bit) ste0: <D-Link DL10050 10/100BaseTX> port 0xc800-0xc87f irq 18 at device 11.0 on pci0 miibus1: <MII bus> on ste0 ukphy0: <Generic IEEE 802.3u media interface> on miibus1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ste0: Ethernet address: 00:05:5d:7a:f0:ee pci0: <display, VGA> at device 14.0 (no driver attached) uhci0: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 21 at device 16.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 21 at device 16.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 21 at device 16.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <VIA VT6202 USB 2.0 controller> irq 21 at device 16.3 on pci0 ehci0: [GIANT-LOCKED] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <VIA VT6202 USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 8235 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd800-0xd80f at device 17.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xdc00-0xdcff irq 23 at device 18.0 on pci0 miibus2: <MII bus> on vr0 ukphy1: <Generic IEEE 802.3u media interface> on miibus2 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto vr0: Ethernet address: 00:50:70:22:53:8c pci0: <multimedia, audio> at device 19.0 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ucom0: Prolific Technology Inc. USB-Serial Controller, rev 1.10/3.00, addr 2 Timecounter "TSC" frequency 1528986893 Hz quality 800 Timecounters tick every 1.000 msec ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default ad0: 76351MB <SAMSUNG SV0802N TP100-24> at ata0-master UDMA100 acd0: CDROM <CREATIVE CD5233E/C2.02> at ata1-slave UDMA33 Trying to mount root from ufs:/dev/ad0s1a ext1: link state changed to UP -- WBR
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1182686709.20060605133201>