Date: Wed, 7 Mar 2012 15:02:20 -0800 From: Freddie Cash <fjwcash@gmail.com> To: "Davide D'Amico" <davide.damico@contactlab.com> Cc: freebsd-fs@freebsd.org Subject: Re: FreeBSD 9 and gmirror /geom raid Message-ID: <CAOjFWZ5Bc5MZp4LSEHAiuZfoy7vvqs6mJ0a9c=n5n0SmaZpGRA@mail.gmail.com> In-Reply-To: <op.was0h7dqdwq0iw@davepro.local> References: <op.was0h7dqdwq0iw@davepro.local>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Mar 7, 2012 at 6:14 AM, Davide D'Amico <davide.damico@contactlab.com> wrote: > Hi, I have a server DELL R210 with two sata drives: > ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 > ada0: <SAMSUNG HE253GJ 1AJ30001> ATA-8 SATA 2.x device > ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > ada0: Command Queueing enabled > ada0: 238418MB (488281250 512 byte sectors: 16H 63S/T 16383C) > ada0: Previously was known as ad4 > ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 > ada1: <SAMSUNG HE253GJ 1AJ30001> ATA-8 SATA 2.x device > ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > ada1: Command Queueing enabled > ada1: 238418MB (488281250 512 byte sectors: 16H 63S/T 16383C) > ada1: Previously was known as ad6 > > Previously (8.x) - when I didn't use a hw raid - I used to install freebsd > in a drive (i.e. ad4), boot from it and then: > > # sysctl kern.geom.debugflags=16 > # gmirror label -v -b round-robin data ad4 > # gmirror insert data ad6 > // Modification to /etc/fstab > // reboot > > How could accomplish to the same task with 9.0-RELEASE? http://people.freebsd.org/~rse/mirror/ -- Freddie Cash fjwcash@gmail.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAOjFWZ5Bc5MZp4LSEHAiuZfoy7vvqs6mJ0a9c=n5n0SmaZpGRA>