Date: Wed, 10 Jun 1998 17:59:50 -0700 From: Bernie Doehner <root@uhf.wireless.net> To: Nick Esborn <nick@capella.grayphics.com> Cc: freebsd-questions@FreeBSD.ORG Subject: pppd: serial line looped back Message-ID: <357F2C06.41C67EA6@uhf.wireless.net>
next in thread | raw e-mail | index | archive | help
Hi Nick:
Did you ever find the solution to this?
I have it too on both of my 3.0-SNAP boxes.
Thanks for your help.
Bernie
---------------------------------------------------------------------
Date: Mon, 15 Dec 1997 16:02:01 -0800 (PST)
From: Nick Esborn <nick@capella.grayphics.com>
To: freebsd-questions@freebsd.org
Subject: pppd: serial line looped back
Message-ID:
<Pine.BSF.3.96.971215154434.26727A-100000@capella.grayphics.com>
I am trying to add more modems to an existing pppd termserver setup, on
a
2.2.2 box with a 16-port Cyclom Y PCI card. I am trying to add (and
migrate to) USR Sportster 336s. Using the same software config that
works
with the other modems (PPI V.34s), I get this error message from pppd:
Dec 15 15:43:06 sirius pppd[1895]: pppd 2.2.0 started by root, uid 0
Dec 15 15:43:06 sirius pppd[1895]: Connect: ppp0 <--> /dev/ttyc05
Dec 15 15:43:06 sirius pppd[1895]: Serial line is looped back.
Dec 15 15:43:06 sirius pppd[1895]: Connection terminated.
cu works fine. The modem isn't set to any special loopback mode or
anything. I have tried some different modem settings and nothing seems
to
make a difference. Anyone have any ideas? Here is output form ATI4
(modem settings)
U.S. Robotics Sportster 33600 Fax Settings...
B0 E1 F1 M0 Q0 V1 X4 Y0
BAUD=57600 PARITY=N WORDLEN=8
DIAL=TONE ON HOOK
&A0 &B1 &C0 &D0 &G0 &H1 &I0 &K1
&M4 &N0 &P0 &R2 &S0 &T5 &U0 &Y1
S00=001 S01=000 S02=043 S03=013 S04=010 S05=008 S06=002
S07=060 S08=002 S09=006 S10=014 S11=070 S12=050 S13=000
S15=000 S16=000 S18=000 S19=000 S21=010 S22=017 S23=019
S25=005 S27=000 S28=008 S29=020 S30=000 S31=128 S32=002
S33=000 S34=000 S35=000 S36=014 S38=000 S39=000 S41=000
S42=000
LAST DIALED #:
OK
And dmesg:
Copyright (c) 1992-1997 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
FreeBSD 2.2.2-RELEASE #0: Thu Oct 30 15:39:31 PST 1997
nick@sirius.grayphics.com:/usr/src/sys/compile/SIRIUSTS
CPU: AMD Am5x86 Write-Back (486-class CPU)
Origin = "AuthenticAMD" Id = 0x4f4 Stepping=4
Features=0x1<FPU>
real memory = 25165824 (24576K bytes)
avail memory = 22560768 (22032K bytes)
Probing for devices on PCI bus 0:
cy0 <Cyclades Cyclom-Y Serial Adapter> rev 1 int a irq 9 on pci0:13
vga0 <VGA-compatible display device> rev 71 on pci0:14
chip0 <generic PCI bridge (vendor=1060 device=8881 subclass=0)> rev 4 on
pci0:16
chip1 <generic PCI bridge (vendor=1060 device=886a subclass=1)> rev 13
on
pci0:18:0
pci0:18:1: UMC, device=0x673a, class=storage (ide) [no driver assigned]
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed1 at 0x300-0x31f irq 11 on isa
ed1: address 00:40:05:19:9e:ac, type NE2000 (16 bit)
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <SAMSUNG SHD-30560A (APRO-5) SSI>
wd0: 534MB (1094688 sectors), 1086 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 not found at 0x170
npx0 flags 0x1 on motherboard
npx0: INT 16 interface
WARNING: / was not properly dismounted.
cy0: 1 more silo overflow (total 1)
Thanks in advance for any help.
Nick
Grayphics
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?357F2C06.41C67EA6>