Date: Thu, 05 Nov 1998 22:44:59 +0000 From: Brian Somers <brian@Awfulhak.org> To: Bill Hamilton <bhamil@cmpu.net> Cc: freebsd questions <freebsd-questions@FreeBSD.ORG>, brian@Awfulhak.org Subject: Re: ppp Message-ID: <199811052244.WAA24925@woof.lan.awfulhak.org> In-Reply-To: Your message of "Tue, 03 Nov 1998 22:38:42 CST." <363FDA52.BBB2F3A5@cmpu.net>
next in thread | previous in thread | raw e-mail | index | archive | help
The ``delete 0'' fails because a default route doesn't already exist.
If you want to delete it if it exists and shut up if it doesn't, use
``delete! 0''.
> This is 2.2.7
> When I start ppp -background provider, I get errors on adding
> and deleting route (see ppp.log at bottom).
> I can ping servers and ftp ok, so I guess I'm ok.
> I just wondered with these errors pop up. I followed the handbook
> examples.
>
> netstat -rn gives:
> Routing tables
>
> Internet:
> Destination Gateway Flags Refs Use Netif
> Expire
> default 205.241.182.254 UGSc 0 0 tun0
> 127.0.0.1 127.0.0.1 UH 0 0 lo0
> 205.241.182.254 204.181.96.5 UH 1 0 tun0
>
> This is end of ppp.log :
> Nov 4 02:50:41 bronco ppp[301]: Command: default: set device /dev/cuaa0
> Nov 4 02:50:41 bronco ppp[301]: Command: default: set speed 115200
> Nov 4 02:50:41 bronco ppp[301]: Command: default: disable pred1
> Nov 4 02:50:41 bronco ppp[301]: Command: default: deny pred1
> Nov 4 02:50:41 bronco ppp[301]: Command: default: disable lqr
> Nov 4 02:50:41 bronco ppp[301]: Command: default: deny lqr
> Nov 4 02:50:41 bronco ppp[301]: Command: default: set dial ABORT BUSY
> ABORT NO\sCARRIER TIMEOUT 5 "" AT OK-AT-OK ATE1Q0 OK \dATDT\T TIMEOUT 40
> CONNECT
> Nov 4 02:50:41 bronco ppp[301]: tun0: Phase: Using interface: tun0
> Nov 4 02:50:41 bronco ppp[301]: tun0: Command: cmpu: set phone
> (214)741-4039
> Nov 4 02:50:41 bronco ppp[301]: tun0: Command: cmpu: set login
> Nov 4 02:50:41 bronco ppp[301]: tun0: Command: cmpu: set authname
> bhamil
> Nov 4 02:50:41 bronco ppp[301]: tun0: Command: cmpu: set authkey
> ********
> Nov 4 02:50:41 bronco ppp[301]: tun0: Command: cmpu: set timeout 0
> Nov 4 02:50:41 bronco ppp[301]: tun0: Command: cmpu: set ifaddr
> 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
> Nov 4 02:50:41 bronco ppp[301]: tun0: Command: cmpu: delete ALL
> Nov 4 02:50:41 bronco ppp[301]: tun0: Command: cmpu: add 0 0 HISADDR
> Nov 4 02:50:41 bronco ppp[302]: tun0: Phase: PPP Started.
> Nov 4 02:50:41 bronco ppp[302]: tun0: Phase: Connected!
> Nov 4 02:50:41 bronco ppp[302]: tun0: Chat: Dial attempt 1 of 1
> Nov 4 02:50:41 bronco ppp[302]: tun0: Chat: Expecting:
> Nov 4 02:50:41 bronco ppp[302]: tun0: Chat: Sending: AT^M
> Nov 4 02:50:41 bronco ppp[302]: tun0: Chat: Expecting: OK-AT-OK
> Nov 4 02:50:41 bronco ppp[302]: tun0: Chat: Wait for (5): OK
> Nov 4 02:50:41 bronco ppp[302]: tun0: Connect: ^M
> Nov 4 02:50:41 bronco ppp[302]: tun0: Connect: OK
> Nov 4 02:50:41 bronco ppp[302]: tun0: Chat: Sending: ATE1Q0^M
> Nov 4 02:50:41 bronco ppp[302]: tun0: Chat: Expecting: OK
> Nov 4 02:50:41 bronco ppp[302]: tun0: Chat: Wait for (5): OK
> Nov 4 02:50:41 bronco ppp[302]: tun0: Connect: ^M
> Nov 4 02:50:41 bronco ppp[302]: tun0: Connect: ^M
> Nov 4 02:50:41 bronco ppp[302]: tun0: Connect: OK
> Nov 4 02:50:43 bronco ppp[302]: tun0: Phase: Phone: (214)741-4039
> Nov 4 02:50:43 bronco ppp[302]: tun0: Chat: Sending:
> ATDT(214)741-4039^M
> Nov 4 02:50:43 bronco ppp[302]: tun0: Chat: Expecting: CONNECT
> Nov 4 02:50:43 bronco ppp[302]: tun0: Chat: Wait for (40): CONNECT
> Nov 4 02:50:43 bronco ppp[302]: tun0: Connect: ^M
> Nov 4 02:50:45 bronco ppp[302]: tun0: Connect: ATDT(214)741-4039^M^M
> Nov 4 02:50:45 bronco ppp[302]: tun0: Connect: CONNECT
> Nov 4 02:50:45 bronco ppp[302]: tun0: IPCP: Using trigger address
> 0.0.0.0
> Nov 4 02:50:45 bronco ppp[302]: tun0: LCP: State change Initial -->
> Closed
> Nov 4 02:50:45 bronco ppp[302]: tun0: LCP: State change Closed -->
> Stopped
> Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: LcpSendConfigReq
> Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: ACFCOMP[2]
> Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: PROTOCOMP[2]
> Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: ACCMAP[6] 0x00000000
> Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: MRU[4] 1500
> Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: MAGICNUM[6] 0x0256449e
> Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: State change Stopped -->
> Req-Sent
> Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: Received Configure Request
> (0) state = Req-Sent (6)
> Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: MRU[4] 1526
> Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP)
> Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: PROTOCOMP[2]
> Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: ACFCOMP[2]
> Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: ACCMAP[6] 0x00000000
> Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: SendConfigAck(Req-Sent)
> Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: MRU[4] 1526
> Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP)
> Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: PROTOCOMP[2]
> Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: ACFCOMP[2]
> Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: ACCMAP[6] 0x00000000
> Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: State change Req-Sent -->
> Ack-Sent
> Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: Received Configure Ack (1)
> state = Ack-Sent (8)
> Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: State change Ack-Sent -->
> Opened
> Nov 4 02:50:46 bronco ppp[302]: tun0: LCP: LcpLayerUp
> Nov 4 02:50:46 bronco ppp[302]: tun0: Phase: NewPhase: Authenticate
> Nov 4 02:50:46 bronco ppp[302]: tun0: Phase: his = PAP, mine = none
> Nov 4 02:50:46 bronco ppp[302]: tun0: Phase: PAP: bhamil
> Nov 4 02:50:46 bronco ppp[302]: tun0: Phase: PapInput: ACK
> Nov 4 02:50:46 bronco ppp[302]: tun0: Phase: Received PAP_ACK ()
> Nov 4 02:50:46 bronco ppp[302]: tun0: Phase: NewPhase: Network
> Nov 4 02:50:46 bronco ppp[302]: tun0: IPCP: State change Initial -->
> Closed
> Nov 4 02:50:46 bronco ppp[302]: tun0: IPCP: IPCP Up event!!
> Nov 4 02:50:46 bronco ppp[302]: tun0: IPCP: IpcpSendConfigReq
> Nov 4 02:50:46 bronco ppp[302]: tun0: IPCP: IPADDR[6] 0.0.0.0
> Nov 4 02:50:46 bronco ppp[302]: tun0: IPCP: COMPPROTO[6] 16 VJ slots
> with slot compres
> Nov 4 02:50:46 bronco ppp[302]: tun0: IPCP: State change Closed -->
> Req-Sent
> Nov 4 02:50:46 bronco ppp[302]: tun0: CCP: State change Initial -->
> Closed
> Nov 4 02:50:46 bronco ppp[302]: tun0: CCP: CCP Up event!!
> Nov 4 02:50:46 bronco ppp[302]: tun0: CCP: CcpSendConfigReq
> Nov 4 02:50:46 bronco ppp[302]: tun0: CCP: DEFLATE[4] win 15
> Nov 4 02:50:46 bronco ppp[302]: tun0: CCP: State change Closed -->
> Req-Sent
> Nov 4 02:50:46 bronco ppp[302]: tun0: IPCP: Received Configure Request
> (1) state = Req-Sent (6)
> Nov 4 02:50:46 bronco ppp[302]: tun0: IPCP: IPADDR[6] 205.241.182.254
> Nov 4 02:50:46 bronco ppp[302]: tun0: IPCP: SendConfigAck(Req-Sent)
> Nov 4 02:50:46 bronco ppp[302]: tun0: IPCP: IPADDR[6] 205.241.182.254
> Nov 4 02:50:46 bronco ppp[302]: tun0: IPCP: State change Req-Sent -->
> Ack-Sent
> Nov 4 02:50:48 bronco ppp[302]: tun0: IPCP: Received Configure Request
> (2) state = Ack-Sent (8)
> Nov 4 02:50:48 bronco ppp[302]: tun0: IPCP: IPADDR[6] 205.241.182.254
> Nov 4 02:50:48 bronco ppp[302]: tun0: IPCP: SendConfigAck(Ack-Sent)
> Nov 4 02:50:48 bronco ppp[302]: tun0: IPCP: IPADDR[6] 205.241.182.254
> Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: IpcpSendConfigReq
> Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: IPADDR[6] 0.0.0.0
> Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: COMPPROTO[6] 16 VJ slots
> with slot compres
> Nov 4 02:50:49 bronco ppp[302]: tun0: CCP: CcpSendConfigReq
> Nov 4 02:50:49 bronco ppp[302]: tun0: CCP: DEFLATE[4] win 15
> Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: Received Configure Reject
> (2) state = Ack-Sent (8)
> Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: RecvConfigRej.
> Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: COMPPROTO[6] 16 VJ slots
> with slot compression
> Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: IpcpSendConfigReq
> Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: IPADDR[6] 0.0.0.0
> Nov 4 02:50:49 bronco ppp[302]: tun0: LCP: Received Protocol Reject (1)
> state = Opened (9)
> Nov 4 02:50:49 bronco ppp[302]: tun0: LCP: -- Protocol (80fd) was
> rejected.
> Nov 4 02:50:49 bronco ppp[302]: tun0: CCP: CcpLayerFinish.
> Nov 4 02:50:49 bronco ppp[302]: tun0: CCP: State change Req-Sent -->
> Stopped
> Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: Received Configure Nak (3)
> state = Ack-Sent (8)
> Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: IPADDR[6] 204.181.96.5
> Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: IPADDR[6] changing
> address: 0.0.0.0 --> 204.181.96.5
> Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: IpcpSendConfigReq
> Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: IPADDR[6] 204.181.96.5
> Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: Received Configure Ack (4)
> state = Ack-Sent (8)
> Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: State change Ack-Sent -->
> Opened
> Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: IpcpLayerUp(9).
> Nov 4 02:50:49 bronco ppp[302]: tun0: IPCP: myaddr = 204.181.96.5
> hisaddr = 205.241.182.254
> Nov 4 02:50:49 bronco ppp[301]: tun0: Phase: Parent: PPP enabled.
> Nov 4 02:50:49 bronco ppp[302]: tun0: Phase: Parent notified of
> success.
> Nov 4 02:50:49 bronco ppp[302]: tun0: LCP: OsLinkup: 205.241.182.254
> Nov 4 02:50:49 bronco ppp[302]: tun0: Command: MYADDR: delete 0
> Nov 4 02:50:49 bronco ppp[302]: tun0: Warning: Del route failed:
> 0.0.0.0: Non-existent
> Nov 4 02:50:49 bronco ppp[302]: tun0: Command: MYADDR: add 0 0 HISADDR
>
--
Brian <brian@Awfulhak.org>, <brian@FreeBSD.org>, <brian@OpenBSD.org>
<http://www.Awfulhak.org>;
Don't _EVER_ lose your sense of humour....
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199811052244.WAA24925>