Date: Tue, 24 May 2005 21:24:19 -0400 From: Mike Tancsa <mike@sentex.net> To: "Jonathan M. Slivko" <freebsd-lists@slivko.org> Cc: freebsd-questions@freebsd.org Subject: Re: 3Ware SATA RAID 8000 - Supported on 5.3-R? Message-ID: <5ok79156nftb7niqjumkttvig0vtdn8vhf@4ax.com> In-Reply-To: <50408.70.18.16.72.1116942842.squirrel@www.slivko.org> References: <50408.70.18.16.72.1116942842.squirrel@www.slivko.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 24 May 2005 09:54:02 -0400 (EDT), in sentex.lists.freebsd.questions you wrote: >Hello, > >I have an interesting question, I have a Pentium 4 2.4Ghz (No HT = Enabled), >2x80GB SATA Hard Drives in RAID 1. The box boots, works, etc. However, >whenever you try and do an fsck -y, it says: > >root@bonjour(~)% fsck -y >** /dev/twed0s1a (NO WRITE) >** Last Mounted on / Are you running fsck manually when the box is in multi-user mode ? If so, thats your problem. What options do you have set in /etc/rc.conf ? ie. what does grep -i fsck /etc/rc.conf grep -i fsck /etc/defaults/rc.conf show ? if you reboot and boot to single user mode and=20 run fsck -a what is the output ? >Anyone got any ideas? I looked at www.3ware.com earlier and it says that >the 8006-2LP's support FreeBSD 4.x, but not 5.x - could this be a result >of that, seeing as otherwise the drives/RAID work fine (AFAIK, it could >not be and I'm just not sure how to test it). Its fully supported and works very well on 5.x. I have a number of such cards deployed running RELENG_5. The website is just not up to date. ---Mike -------------------------------------------------------- Mike Tancsa, Sentex communications http://www.sentex.net Providing Internet Access since 1994 mike@sentex.net, (http://www.tancsa.com)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5ok79156nftb7niqjumkttvig0vtdn8vhf>