Date: Mon, 9 May 2005 00:52:07 -0700 (PDT) From: Jiasheng Hao <haojs@yahoo.com> To: freebsd-mobile@freebsd.org Subject: ACPI seems fatal error on my T41 Message-ID: <20050509075207.96462.qmail@web52110.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
I install FreeBSD on my new T41 2373-9FC, and all works wonderful. But I find some problem: 1. sleep/suspend/resume dosnot work at all; 2. closing the lid or pressing any special key(such as volume control, fn+f3, etc) will make the machine hung, staying there with no repsonse any more; 3. started with acpi disabled or safe mode or single, system will hung just one or two minites; 4. if started normally with acpi enabled, and not typeing any special keys, system work wonderfully, and fan seems work correctly too. But it will not sleep. I cannot set hw.acpi.osname to ``Windows 2001''. Any suggestion or help would be very appreciated. Some of my infomation goes like these: jasonh@bsd$ uname -a FreeBSD bsd 5.4-RC3 FreeBSD 5.4-RC3 #0: Wed Apr 27 11:48:22 CST 2005 root@fbsd:/usr/obj/usr/src/sys/Thinkpad-T41 i386 jasonh@fbsd$ dmesg |grep -i acpi Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE> ACPI: Overriding _OS definition with "Windows 2001" acpi0: <IBM TP-1R> on motherboard acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x66,0x62 on acpi0 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU (3 Cx states)> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ppc0: <Standard parallel printer port> port 0x3bc-0x3be irq 7 on acpi0 acpi_ec0: info: new max delay is 60 us acpi_cmbat0: <Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: battery initialization start acpi_acad0: On Line acpi_cmbat0: battery initialization failed, giving up acpi_acad0: acline initialization start acpi_acad0: acline initialization done, tried 1 times acpi_ec0: info: new max delay is 70 us acpi_ec0: info: new max delay is 80 us jasonh@fbsd$ sysctl hw.acpi hw.acpi.supported_sleep_state: S3 S4 S5 hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S3 hw.acpi.lid_switch_state: NONE hw.acpi.standby_state: S1 hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 1 hw.acpi.s4bios: 0 hw.acpi.verbose: 1 hw.acpi.reset_video: 1 hw.acpi.cpu.cx_supported: C1/1 C2/1 C3/85 hw.acpi.cpu.cx_lowest: C1 hw.acpi.cpu.cx_usage: 100.00% 0.00% 0.00% hw.acpi.thermal.min_runtime: 0 hw.acpi.thermal.polling_rate: 10 hw.acpi.thermal.tz0.temperature: 45.0C hw.acpi.thermal.tz0.active: -1 hw.acpi.thermal.tz0.thermal_flags: 0 hw.acpi.thermal.tz0._PSV: 88.5C hw.acpi.thermal.tz0._HOT: -1 hw.acpi.thermal.tz0._CRT: 93.0C hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 hw.acpi.battery.life: -1 hw.acpi.battery.time: -1 hw.acpi.battery.state: 7 hw.acpi.battery.units: 1 hw.acpi.battery.info_expire: 5 hw.acpi.acline: 1 jasonh@fbsd$ sysctl hw.acpi.osname sysctl: unknown oid 'hw.acpi.osname' Discover Yahoo! Get on-the-go sports scores, stock quotes, news and more. Check it out! http://discover.yahoo.com/mobile.html
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050509075207.96462.qmail>