Date: Wed, 15 Jan 2003 08:05:02 -0500 (EST) From: "Stephen D. Kingrea" <reytech@sover.net> To: freebsd-questions@freebsd.org Subject: solved : Re: newbie questions about pppoe and netgraph Message-ID: <Pine.BSI.4.21.0301150749570.15437-100000@granite.sover.net> In-Reply-To: <Pine.BSI.4.21.0301111117370.8181-100000@granite.sover.net>
next in thread | previous in thread | raw e-mail | index | archive | help
2 problems
1 > cable modem needed 10baset connection. changed rc.conf=
ifconfig_dc0="inet xxx.xxx.xxx.xxx mask 255.255.255.0 media 10baseT/UTP"
fixed that problem
2 > didn't need pppoe after all! after changing media, was able to ping
external router
btw, this is charter pipeline (vermont) service (768) using 3com 3cr29223
home connect external usb/ether (NOT adsl dual connect). tech support was
friendly but basically clueless ("i don't know anything about
free-bee-ess-dee" "ppp over ethernet? what's that?").
anyway, thanks for all of your help....i learned more about pppoe than i
ever wanted. all you guys are terrific!
stephen
On Sat, 11 Jan 2003, Stephen D. Kingrea wrote:
>this is the latest, unchanged from this am. i should say that using
>different parameters from the several different tutorial sources has
>resulted in pretty much the same result: flaking out at lpc (if that is
>what is really happening)
>
>additionally, the set ifaddr line seems superfluous, since i have an
>assigned ip address and established route
>
>default:
> set device PPPoE:fxp0
> set speed mru 1492
> set speed mtu 1492
> set ctsrts off
> enable lqr
> set lqrperiod 5
> set cd 5
> set log All
> set log local phase chat lcp ccp tun command
> add default HISADDR
> enable dns
> set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255 0.0.0.0
> set authname *****
> set authkey *****
> set login
> set dial
> set timeout 0
> open
>
>
>stephen
>
>On Sat, 11 Jan 2003, Matthew Emmerton wrote:
>
>>> What does your ppp.conf look like? For PPPoE, it you should have a line
>>> like this:
>>
>>[ dang email client ]
>>
>>set device PPPoE:ed1
>>
>>where ed1 is the network card that is hooked up to your DSL modem.
>>
>>>
>>> --
>>> Matt
>>>
>>> >
>>> > www# /usr/sbin/ppp
>>> > Working in interactive mode
>>> > Using interface: tun0
>>> > tun0: Command: default: add default HISADDR
>>> > tun0: Command: default: enable DNS
>>> > tun0: Command: default: set ifaddr 10.0.0.1/0 10.0.0.0/2 255.255.255
>>> > 0.0.0.0
>>> > tun0: Command: default: set authname ******
>>> > tun0: Command: default: set authkey ******
>>> > tun0: Command: default: set login
>>> > tun0: Command: default: set dial
>>> > tun0: Command: default: set timeout 0
>>> > tun0: Command: default: open
>>> > tun0: Phase: bundle: Establish
>>> > tun0: Phase: closed -> opening
>>> > tun0: Phase: PPP started (interactive)
>>> > tun0: Phase: deflink: Connected!
>>> > tun0: Phase: deflink: opening -> dial
>>> > tun0: Chat: deflink: Dial attempt 1 of 1
>>> > tun0: Phase: deflink: dial -> carrier
>>> > ppp ON www> tun0: Phase: deflink: Disconnected!
>>> > tun0: Phase: deflink: carrier -> hangup
>>> > tun0: Phase: deflink: Connect time: 5 secs: 0 octets in, 0 octets out
>>> > tun0: Phase: total 0 bytes/sec, peak 0 bytes/sec on Sat Jan 11
>>> > tun0: Phase: deflink hangup -> closed
>>> > tun0: Phase: bundle: Dead
>>> >
>>> > i imagine that some of this is unnecessary, but it appears that i am not
>>> > even getting to authentication before disconnecting.
>>> >
>>> > thank you
>>> >
>>> > stephen
>>> >
>>> > On Sat, 11 Jan 2003, Matthew Emmerton wrote:
>>> >
>>> > >> attempting to run pppoe on freebsd 4.7 over cable/dsl connection.
>>> > >>
>>> > >> manual says kernel recompilation unnecessary for this release in
>>> > >> order to run pppoe. however, netgraph does not seem to be loading at
>>> boot
>>> > >> time. additionally, pppoe seems unable to get past lcp when
>>connecting.
>>> > >>
>>> > >> how can i tell if netgraph is active after boot? if not, can netgraph
>>> > >> modules be loaded at boot by adding necessary lines into loader.conf?
>>> or
>>> > >> is recompiling kernel a preferred method?
>>> > >
>>> > >If netgraph and pppoe support are not present in your kernel (or not
>>> loaded
>>> > >from modules automatically), the ppp program will complain loudly.
>>> > >
>>> > >Can you post part of your ppp log file so that we can determine if the
>>> lack
>>> > >of pppoe is your problem or if it's something else?
>>> > >
>>> > >--
>>> > >Matt Emmerton
>>> > >
>>> > >
>>> > >
>>> > >To Unsubscribe: send mail to majordomo@FreeBSD.org
>>> > >with "unsubscribe freebsd-questions" in the body of the message
>>> > >
>>> >
>>>
>>>
>>> To Unsubscribe: send mail to majordomo@FreeBSD.org
>>> with "unsubscribe freebsd-questions" in the body of the message
>>>
>>
>>
>>To Unsubscribe: send mail to majordomo@FreeBSD.org
>>with "unsubscribe freebsd-questions" in the body of the message
>>
>
>
>To Unsubscribe: send mail to majordomo@FreeBSD.org
>with "unsubscribe freebsd-questions" in the body of the message
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSI.4.21.0301150749570.15437-100000>